WS73V100星闪扫描不到设备sle

现在WS73使用星闪sle的静态库找海思代理商拿到了，server端和client端连接不上。
主控使用的是Hi3516DV500.
1、现在WiFi可以正常使用。
2、蓝牙和sle都不能够使用。
下面是星闪sle的日志（server端和client端）：
「附件有设备重启到运行sle的全量日志信息，还望大佬帮忙解决一下谢谢」

```c server端

sle_server_sample main start.

register signal SIGKILL failed.
[sle uuid server] current path: /work[1970-01-01 08:01:13.0] gle_file_store_init enter.
[1970-01-01 08:01:13.0] bgh_init_config enter
[1970-01-01 08:01:13.0] [uapi gle_init]
[AMPDU RX] {hmac_mgmt_tx_addba_rsp_send::TID[7] STATUS[0] LUT INDEX[1] BAWSIZE[32].}
sle_misc_dev_open:96
plat_soc:W]bsle_open_close_cmd, service[2], type[1].
[HCC] start hcc_adapt_bsle_msg_rx_proc,type:4,device_msg:2
[HCC] Get bsle device action msg, type=[2]
sle btc open finish
sle set sle state 1
sle open time:38
[bts][info] btsrv_task_init btsrv_init: task create success
[1970-01-01 08:01:13.183651] ssapc client init
[1970-01-01 08:01:13.-187353413] ssapc register inter cbk
[1970-01-01 08:01:13.32] [ACore] gle get nv config data_len = 74.
[1970-01-01 08:01:13.0] bgh_read_config size error, size:379144 len:0 offset:0
[1970-01-01 08:01:13.0] data_read read config fail
[1970-01-01 08:01:13.-1225635257] [ACore] bt read nv config fail, errcode: 0x1
[1970-01-01 08:01:13.0] bgh_read_config size error, size:379144 len:0 offset:0
[1970-01-01 08:01:13.0] data_read read config fail
[1970-01-01 08:01:13.-1225635257] [ACore] bt read nv smp keys fail, errcode: 0x1
[1970-01-01 08:01:13.69777] [uapi gle_enable]
[1970-01-01 08:01:13.157083] [gle manger enable]enter
[1970-01-01 08:01:13.120] gle dd init
[1970-01-01 08:01:13.-1225643840] gle cm init enter
[1970-01-01 08:01:13.168587] [GLE DM][DM init] transmission management module init
[1970-01-01 08:01:13.-1225914415] [GLE TM][TM init] transmission management module init
[1970-01-01 08:01:13.-187353413] gle ssap init ok
[1970-01-01 08:01:13.-1225850163] [GLE SM] start init
[1970-01-01 08:01:13.485748] [GLE DM][DM init] security management module init
[1970-01-01 08:01:13.-1225635228] gle hadm init enter.
[1970-01-01 08:01:13.291353] gle factory init enter.
[1970-01-01 08:01:13.291353] gle glp init enter.
[1970-01-01 08:01:13.291353] gle read maximum adv data len
[1970-01-01 08:01:13.-1225643840] read access filter list size
[1970-01-01 08:01:13.-187353413] [GLE SM] read support cryptography algorithm
[1970-01-01 08:01:13.-1225643840] [HCI]send cmd event:0x2, opcode:0xc06, cmd:0x76d38
[1970-01-01 08:01:13.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f1e1e0, TIME=2000
[1970-01-01 08:01:13.0] hci cmd send opcode:0xc06 paramlen=0x0
[1970-01-01 08:01:13.483328] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:01:13.-1251238524] [HCI]send cmd event:0x2, opcode:0x40a, cmd:0x76d68
[1970-01-01 08:01:13.8] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:01:13.-1251238524] [HCI]send cmd event:0x2, opcode:0x406, cmd:0x76d98
[1970-01-01 08:01:13.8] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:01:13.-1251238524] [HCI]send cmd event:0x2, opcode:0x402, cmd:0x76dc8
[1970-01-01 08:01:13.8] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:01:13.-1225643840] [HCI]send cmd event:0x2, opcode:0x1c07, cmd:0xb6f1e468
[1970-01-01 08:01:13.8] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:01:13.-1251238544] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f1e1e0
[1970-01-01 08:01:13.-1225639660] gle execute cmd cbk opscode:0xc06,ret:0
[1970-01-01 08:01:13.-187353413] opcode = 0x0c06, cmd_result = 0x0
[1970-01-01 08:01:13.-1251238920] max_adv_data_len = 0x00fb
[1970-01-01 08:01:13.1] gle read maximum adv data len
[1970-01-01 08:01:13.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f1e1a0, TIME=2000
[1970-01-01 08:01:13.0] hci cmd send opcode:0x40a paramlen=0x0
[1970-01-01 08:01:13.483328] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:01:13.166977] [HCI]send cmd event:0x2, opcode:0xc07, cmd:0xb6f1e498
[1970-01-01 08:01:13.8] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:01:13.-1251238544] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f1e1a0
[1970-01-01 08:01:13.1] gle execute cmd cbk opscode:0x40a,ret:0
[1970-01-01 08:01:13.-187353413] opcode = 0x040a, cmd_result = 0x0
[1970-01-01 08:01:13.-1251238920] read access filter list size = 16
[1970-01-01 08:01:13.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f1e350, TIME=2000
[1970-01-01 08:01:13.0] hci cmd send opcode:0x406 paramlen=0x0
[1970-01-01 08:01:13.483328] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:01:13.-1251238544] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f1e350
[1970-01-01 08:01:13.1] gle execute cmd cbk opscode:0x406,ret:0
[1970-01-01 08:01:13.-187353413] opcode = 0x0406, cmd_result = 0x0
[1970-01-01 08:01:13.-1251238920] get addr:0x00:01::::6a
[1970-01-01 08:01:13.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f1e1a0, TIME=2000
[1970-01-01 08:01:13.0] hci cmd send opcode:0x402 paramlen=0x0
[1970-01-01 08:01:13.483328] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:01:13.-1251238544] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f1e1a0
[1970-01-01 08:01:13.1] gle execute cmd cbk opscode:0x402,ret:0
[1970-01-01 08:01:13.166977] [gle manger enable]result = 0x00
[ACore] sle enable cbk in, result:0
[1970-01-01 08:01:13.1970] dev enable ret:0.
[sle uuid server] sle enable callback status:0
sle enable server callback.
[sle uuid server] sle uuid add service in
[1970-01-01 08:01:13.0] sapi gle ssap register server add ok
[1970-01-01 08:01:13.-1242837856] sle ssap mtu server_id:1500, mtu_size:1, version:365904
[1970-01-01 08:01:13.-1225796319] ssap mtu size:1500
[sle uuid server] sle uuid add property succ, g_tx_handle:2
[sle uuid server] sle uuid add property succ, rx_handle:3
[sle uuid server] sle uuid add service, server_id:1, service_handle:1, indication_handle:2
[1970-01-01 08:01:13.-1225660960] sle service info:[handle:1][is_primary:0][is_active: 2]
[1970-01-01 08:01:13.151823] [btsrv][INFO]uuid:37BE
[1970-01-01 08:01:13.0] sle property node:[handle:2][operate_indication:0x9][permission:0x3]
[1970-01-01 08:01:13.151823] [btsrv][INFO]uuid:37BE
[1970-01-01 08:01:13.0] sle desc node:[type:0x2][operate_indication:0x9][permission: 0x3]
[1970-01-01 08:01:13.151823] [btsrv][INFO]uuid:37BE
[1970-01-01 08:01:13.484176] sle property node:[handle:3][operate_indication:0x3][permission:0x3]
[1970-01-01 08:01:13.151823] [btsrv][INFO]uuid:37BE
[1970-01-01 08:01:13.0] sle desc node:[type:0x2][operate_indication:0x3][permission: 0x3]
[1970-01-01 08:01:13.151823] [btsrv][INFO]uuid:37BE
[1970-01-01 08:01:13.1] sapi ssaps add service, protocol:01 service type:00, len:2
[1970-01-01 08:01:13.1] sapi ssaps add service, uuid:37bea880
[1970-01-01 08:01:13.1970] sle add item(1) result(0)
[1970-01-01 08:01:13.1970] sle sle ssaps add property(2)
[1970-01-01 08:01:13.0] sapi ssaps add property data_size:3
[1970-01-01 08:01:13.3] sapi ssaps add property property_handle:0x00
[1970-01-01 08:01:13.1970] sle add item(2) result(0)
[1970-01-01 08:01:13.1970] sle sle ssaps add descriptor(2)
[1970-01-01 08:01:13.0] sapi ssaps add property desc property_handle: 0x00
[1970-01-01 08:01:13.0] sapi ssaps add property desc descr_count = 1
[1970-01-01 08:01:13.1970] sle add item(2) result(0)
[1970-01-01 08:01:13.1970] sle sle ssaps add property(3)
[1970-01-01 08:01:13.0] sapi ssaps add property data_size:3
[1970-01-01 08:01:13.3] sapi ssaps add property property_handle:0x00
[1970-01-01 08:01:13.1970] sle add item(3) result(0)
[1970-01-01 08:01:13.1970] sle sle ssaps add descriptor(3)
[1970-01-01 08:01:13.0] sapi ssaps add property desc property_handle: 0x00
[1970-01-01 08:01:13.0] sapi ssaps add property desc descr_count = 1
[1970-01-01 08:01:13.1970] sle add item(3) result(0)
[1970-01-01 08:01:13.1970] sle sle ssaps start server(1) service(1)
[1970-01-01 08:01:13.-187353413] sapi ssaps start service enter
[sle uuid server] sle uuid add service out
[1970-01-01 08:01:13.32] gle acore smp keys memcmp err, data all zero!
[1970-01-01 08:01:13.46] gle acore smp keys memcmp err, data all zero!
[1970-01-01 08:01:13.46] gle acore smp keys memcmp err, data all zero!
[1970-01-01 08:01:13.46] gle acore smp keys memcmp err, data all zero!
[1970-01-01 08:01:13.133643] recover key fail, there is no key
sle enable
[sle uuid server] init ok
[1970-01-01 08:01:13.197529] [gle hci read buffer size] result = 0x0, opindex: 0x00000402
[1970-01-01 08:01:13.197529] [gle hci read buffer size] acb data len: 254 num: 5, icb data len: 0 num: 0
[1970-01-01 08:01:13.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f1e0c0, TIME=2000
[1970-01-01 08:01:13.0] hci cmd send opcode:0x1c07 paramlen=0x0
[1970-01-01 08:01:13.483328] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:01:13.-1251238544] ssap server reg tree enter
[1970-01-01 08:01:13.-187353413] cs reg service range:0x3, uuid_len:2, uuid:0x2222
[1970-01-01 08:01:13.157083] cs reg service service hdl:0x1, service end_hdl:0x3
[1970-01-01 08:01:13.-1225914415] [cs reg character]hdl:0x02, type = 0x2, uuid:0x2310
[1970-01-01 08:01:13.-1251238800] cs reg descriptor descriptor->type:0x2
[1970-01-01 08:01:14.-1225914415] [cs reg character]hdl:0x03, type = 0x2, uuid:0x2323
[1970-01-01 08:01:14.-1251238800] cs reg descriptor descriptor->type:0x2
[1970-01-01 08:01:14.0] cs server reg tree out
[1970-01-01 08:01:14.-1225769895] ssap server reg tree ok
[1970-01-01 08:01:14.1970] ssap reg item print enter
[1970-01-01 08:01:14.26] primary service item
[1970-01-01 08:01:14.21] property item
[1970-01-01 08:01:14.14] property item
[1970-01-01 08:01:14.28874] sle start service(1) success, begin hdl(1) end hdl(3) property num(2)
[sle uuid server] start service cbk callback server_id:1, handle:1, status:0
sle uuid server adv init.
[sle uuid server] sle_uuid_local addr: 0x00 0x00 0x00 0x00 0x00 0x01
[ACore] sle set announce param, handle:1, mode:3, min_interval:c8, max_interval:c8, tx_power: 0
[ACore] sle set announce param, own addr:0x00::::00:01
[ACore] sle set announce param, peer addr:0x00:::**:00:00
[sle uuid server] data.announce_data_len = 6
[sle uuid server] data.announce_data: 0x01 0x02 0x01 0x02 0x02 0x00
[sle uuid server] local_name_len = 15
[sle uuid server] local_name: 0x73 0x6c 0x65 0x5f 0x75 0x75 0x69 0x64 0x5f 0x73 0x65 0x72 0x76 0x65 0x72
[sle uuid server] data.seek_rsp_data_len = 20
[sle uuid server] data.seek_rsp_data: 0x0c 0x02 0x0a 0x10 0x0b 0x73 0x6c 0x65 0x5f 0x75 0x75 0x69 0x64 0x5f 0x73 0x65 0x72 0x76 0x65 0x72
[sle uuid server] set announce data success.
[ACore] sle start announce in, adv_id:1
[1970-01-01 08:01:14.0] adv_gt_role = 0x0
[1970-01-01 08:01:14.-1251238544] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f1e0c0
[1970-01-01 08:01:14.-1225639660] gle execute cmd cbk opscode:0x1c07,ret:0
[1970-01-01 08:01:14.-1225796319] opcode = 0x1c07, cmd_result = 0x0
[1970-01-01 08:01:14.-1251238928] [GLE SM] algo: 0x02 0x02 0x02 0x00
[1970-01-01 08:01:14.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f1e3b0, TIME=2000
[1970-01-01 08:01:14.0] hci cmd send opcode:0xc07 paramlen=0x0
[1970-01-01 08:01:14.483328] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:01:14.-1251238524] adv_handle = 0x1
[1970-01-01 08:01:14.1970] list_count = 0, supported_adv_sets_num = 0x1
[1970-01-01 08:01:14.-187353413] aa set adv params in
[1970-01-01 08:01:14.-187353413] [HCI]send cmd event:0x2, opcode:0xc02, cmd:0x76d38
[1970-01-01 08:01:14.8] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:01:14.-1251238544] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f1e3b0
[1970-01-01 08:01:14.1] gle execute cmd cbk opscode:0xc07,ret:0
[1970-01-01 08:01:14.-187353413] opcode = 0x0c07, cmd_result = 0x0
[1970-01-01 08:01:14.-1251238920] supported_adv_sets_num = 0x8
[1970-01-01 08:01:14.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f1e1a0, TIME=2000
[1970-01-01 08:01:14.0] hci cmd send opcode:0xc02 paramlen=0x31
[1970-01-01 08:01:14.483328] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:01:14.-1251238544] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f1e1a0
[1970-01-01 08:01:14.-1225639660] gle execute cmd cbk opscode:0xc02,ret:0
[1970-01-01 08:01:14.14] set adv params cfm adv_handle = 0x1
[1970-01-01 08:01:14.1970] opcode = 0x0c02, cmd_result = 0x0
[1970-01-01 08:01:14.1] [dd]event = 0x0
[ACore] sle adv cbk in, event:0 status:0
[1970-01-01 08:01:14.-187353413] [SLE ADV CBK] event: 0.
[1970-01-01 08:01:14.-1251238524] tx_power_value = -6
[1970-01-01 08:01:14.-187353413] mgr_adv_item->status = 0x5
[1970-01-01 08:01:14.-187353413] adv_data_offset = 0, adv_data_len = 6
[1970-01-01 08:01:14.9] gle hci command check send check and send, cmd_num:0x1
[1970-01-01 08:01:14.166977] [HCI]send cmd event:0x2, opcode:0xc03, cmd:0x76dc8
[1970-01-01 08:01:14.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f1e3d0, TIME=2000
[1970-01-01 08:01:14.0] hci cmd send opcode:0xc03 paramlen=0x9
[1970-01-01 08:01:14.483328] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:01:14.-1251238544] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f1e3d0
[1970-01-01 08:01:14.-1225639660] gle execute cmd cbk opscode:0xc03,ret:0
[1970-01-01 08:01:14.1970] gle set adv data cfm adv_handle = 0x1
[1970-01-01 08:01:14.1970] opcode = 0x0c03, cmd_result = 0x0
[1970-01-01 08:01:14.8] opcode = 0x0c03, result = 0x0, data_offset = 6, data_len = 6
[1970-01-01 08:01:14.483328] ind_type = 0x1, status = 0x5, cur_status = 0x5, next_status = 0x6
[1970-01-01 08:01:14.-187353413] [dd]event = 0x1
[ACore] sle adv cbk in, event:1 status:0
[1970-01-01 08:01:14.-187353413] [SLE ADV CBK] event: 1.
[1970-01-01 08:01:14.0] mgr_adv_item->status = 0x6
[1970-01-01 08:01:14.0] scan_rsp_data_offset = 0, scan_rsp_data_len = 20
[1970-01-01 08:01:14.-187353413] gle hci command check send check and send, cmd_num:0x1
[1970-01-01 08:01:14.166977] [HCI]send cmd event:0x2, opcode:0xc04, cmd:0xb6f1e498
[1970-01-01 08:01:14.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f1e3b0, TIME=2000
[1970-01-01 08:01:14.0] hci cmd send opcode:0xc04 paramlen=0x17
[1970-01-01 08:01:14.483328] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:01:14.-1251238544] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f1e3b0
[1970-01-01 08:01:14.1] gle execute cmd cbk opscode:0xc04,ret:0
[1970-01-01 08:01:14.1970] gle set adv data cfm adv_handle = 0x1
[1970-01-01 08:01:14.1970] opcode = 0x0c04, cmd_result = 0x0
[1970-01-01 08:01:14.8] opcode = 0x0c04, result = 0x0, data_offset = 20, data_len = 20
[1970-01-01 08:01:14.483328] ind_type = 0x2, status = 0x6, cur_status = 0x6, next_status = 0x1
[1970-01-01 08:01:14.-187353413] [dd]event = 0x2
[ACore] sle adv cbk in, event:2 status:0
[1970-01-01 08:01:14.-187353413] [SLE ADV CBK] event: 2.
[1970-01-01 08:01:14.0] adv_handle = 0x1, adv_enable = 0x1
[1970-01-01 08:01:14.197281] discovery id(1) enable.
[1970-01-01 08:01:14.0] mgr_adv_item->status = 0x1
[1970-01-01 08:01:14.1] update adv params success
[1970-01-01 08:01:14.14011] gle hci command check send check and send, cmd_num:0x1
[1970-01-01 08:01:14.0] adv_handle = 0x1, enable = 0x1
[1970-01-01 08:01:14.-1225661192] [HCI]send cmd event:0x2, opcode:0xc05, cmd:0xb6f1e4f8
[1970-01-01 08:01:14.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f1e1e0, TIME=2000
[1970-01-01 08:01:14.0] hci cmd send opcode:0xc05 paramlen=0x5
[1970-01-01 08:01:14.483328] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:01:14.-1251238544] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f1e1e0
[1970-01-01 08:01:14.-1225639660] gle execute cmd cbk opscode:0xc05,ret:0
[1970-01-01 08:01:14.1970] gle set adv enable cfm adv_handle = 0x1
[1970-01-01 08:01:14.1970] opcode = 0x0c05, cmd_result = 0x0
[1970-01-01 08:01:14.1] [dd]event = 0x3
[ACore] sle adv cbk in, event:3 status:0
[1970-01-01 08:01:14.-187353413] [SLE ADV CBK] event: 3.
[1970-01-01 08:01:14.64304827] gle hci command check send check and send, cmd_num:0x1
[sle uuid server] sle announce enable callback id:01, state:0

^A^H^Crecv signal: 2, exit sle_server_sample.
[sle uuid server] deinit
sle uuid server adv deinit.
[ACore] sle stop announce in, adv_id:1
[1970-01-01 08:02:10.32] adv_handle = 0x1, adv_enable = 0x0
[1970-01-01 08:02:10.197281] discovery id(1) disable.
[1970-01-01 08:02:10.0] device is not scaning, please start first.
[1970-01-01 08:02:10.1] discovery id is invalid.
[ACore] sle stop announce in, adv_id:1
[1970-01-01 08:02:10.0] adv_handle = 0x1, enable = 0x0
[1970-01-01 08:02:10.1970] mgr_adv_item->adv_status = 0x1
[1970-01-01 08:02:10.195935] [HCI]send cmd event:0x2, opcode:0xc05, cmd:0x76d98
[1970-01-01 08:02:10.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f1e0e0, TIME=2000
[1970-01-01 08:02:10.0] hci cmd send opcode:0xc05 paramlen=0x5
[1970-01-01 08:02:10.483328] gle hci command check send check and send, cmd_num:0x0
[sle uuid server] delete all service callback server_id:1, status:0
[1970-01-01 08:02:10.-187353413] [1970-01-01 08:02:10.-1225796319] adv_handle = 0x1, adv_enable = 0x0
sle unregister server 1 success.
[1970-01-01 08:02:10.197281] discovery id(1) disable.
[ACore] sle stop announce in, adv_id:2
[1970-01-01 08:02:10.0] adv_handle = 0x1, enable = 0x0
[1970-01-01 08:02:10.197281] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:3
[1970-01-01 08:02:10.1970] mgr_adv_item->adv_status = 0x1
[1970-01-01 08:02:10.52] [1970-01-01 08:02:10.195935] [HCI]send cmd event:0x2, opcode:0xc05, cmd:0xb6f1e468
[1970-01-01 08:02:10.8] gle hci command check send check and send, cmd_num:0x0
discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:4
[1970-01-01 08:02:10.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:5
[1970-01-01 08:02:10.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:6
[1970-01-01 08:02:10.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:7
[1970-01-01 08:02:10.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:8
[1970-01-01 08:02:10.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:9
[1970-01-01 08:02:10.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:a
[1970-01-01 08:02:10.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:b
[1970-01-01 08:02:10.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:c
[1970-01-01 08:02:10.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:d
[1970-01-01 08:02:10.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:e
[1970-01-01 08:02:10.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:f
[1970-01-01 08:02:10.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:10
[1970-01-01 08:02:10.52] discovery id is not active, please set param first.
[1970-01-01 08:02:10.-1225635232] ssapc client deinit
[1970-01-01 08:02:10.20] gle_deinit_config enter.
[1970-01-01 08:02:10.-1251238544] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f1e0e0
[1970-01-01 08:02:10.1] gle execute cmd cbk opscode:0xc05,ret:0
[1970-01-01 08:02:10.1970] gle set adv enable cfm adv_handle = 0x1
[1970-01-01 08:02:10.1970] opcode = 0x0c05, cmd_result = 0x0
[1970-01-01 08:02:10.1] [dd]event = 0x4
[ACore] sle adv cbk in, event:4 status:0
[1970-01-01 08:02:10.-187353413] [SLE ADV CBK] event: 4.
[1970-01-01 08:02:10.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f1e3b0, TIME=2000
[sle uuid server] sle announce disable callback id:01, state:0
[1970-01-01 08:02:10.0] hci cmd send opcode:0xc05 paramlen=0x5
[1970-01-01 08:02:10.483328] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:02:10.-1251238544] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f1e3b0
[1970-01-01 08:02:10.-1225639660] gle execute cmd cbk opscodsle_misc_dev_release:208
e:0xc05,ret:0
[1970-01-01 08:02:10.197plat_soc:W]bsle_open_close_cmd, service[2], type[0].
0] gle set adv enable cfm adv_handle = 0[HCC] start hcc_adapt_bsle_msg_rx_proc,type:4,device_msg:3
x1
[1970-01-01 08:02:10.1970] opcode =[HCC] Get bsle device action msg, type=[3]
0x0c05, cmd_result = 0x0
[1970-01-01 sle btc close finish
08:02:10.1] [dd]event = 0x4
[ACore] slsle set sle state 0
e adv cbk in, event:4 status:0
[1970-01-01 08: sle_close time:44
02:10.0] [uapi gle_disable]
[1970-01-01 08:02:10.-187353413] [SLE ADV CBK] event: 4.
[1970-01-01 08:02:10.151823] [gle manger disable] enter reset
/work #

```c   client端
/work # ./sle_client_sample
main start.

register signal SIGKILL failed.
sle_sample_register_persistence_info current path: /work[1970-01-01 08:02:04.-1094099117] gle_file_store_init enter.
[1970-01-01 08:02:04.0] bgh_init_config enter
[1970-01-01 08:02:04.0] [uapi gle_init]
[AMPDU RX] {hmac_mgmt_tx_addba_rsp_send::TID[0] STATUS[0] LUT INDEX[1] BAWSIZE[32].}
sle_misc_dev_open:96
plat_soc:W]bsle_open_close_cmd, service[2], type[1].
[HCC] start hcc_adapt_bsle_msg_rx_proc,type:4,device_msg:2
[HCC] Get bsle device action msg, type=[2]
 sle btc open finish
sle set sle state 1
 sle open time:39
[bts][info] btsrv_task_init btsrv_init: task create success
[1970-01-01 08:02:04.239043] ssapc client init
[1970-01-01 08:02:04.120] gle dd init
[1970-01-01 08:02:04.1728185349] ssapc register inter cbk
[1970-01-01 08:02:04.32] [ACore] gle get nv config data_len = 74.
[1970-01-01 08:02:04.482528] gle cm init enter
[1970-01-01 08:02:04.0] bgh_read_config size error, size:374836 len:0 offset:0
[1970-01-01 08:02:04.174199] [GLE DM][DM init] transmission management module init
[1970-01-01 08:02:04.0] data_read read config fail
[1970-01-01 08:02:04.-1225143737] [ACore] bt read nv config fail, errcode: 0x1
[1970-01-01 08:02:04.-1225422895] [GLE TM][TM init] transmission management module init
[1970-01-01 08:02:04.0] bgh_read_config size error, size:374836 len:0 offset:0
[1970-01-01 08:02:04.1728185349] gle ssap init  ok
[1970-01-01 08:02:04.0] data_read read config fail
[1970-01-01 08:02:04.-1225358643] [GLE SM] start init
[1970-01-01 08:02:04.-1225143737] [1970-01-01 08:02:04.481544] [GLE DM][DM init] security management module init
[ACore] bt read nv smp keys fail, errcode: 0x1
[1970-01-01 08:02:04.-1225143674] gle hadm init enter.
[1970-01-01 08:02:04.69729] [uapi gle_enable]
[1970-01-01 08:02:04.248809] gle factory init enter.
[1970-01-01 08:02:04.162695] [gle manger enable]enter
[1970-01-01 08:02:04.248809] gle glp init enter.
[1970-01-01 08:02:04.248809] gle read maximum adv data len
[1970-01-01 08:02:04.482528] read access filter list size
[1970-01-01 08:02:04.1728185349] [GLE SM] read support cryptography algorithm
[1970-01-01 08:02:04.482528] [HCI]send cmd event:0x2, opcode:0xc06, cmd:0xb6f9ab48
[1970-01-01 08:02:04.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f9a780, TIME=2000
[1970-01-01 08:02:04.0] hci cmd send opcode:0xc06 paramlen=0x0
[1970-01-01 08:02:04.479232] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:02:04.-1250747004] [HCI]send cmd event:0x2, opcode:0x40a, cmd:0xb6f9ab78
[1970-01-01 08:02:04.8] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:02:04.-1250747004] [HCI]send cmd event:0x2, opcode:0x406, cmd:0xb6f9aba8
[1970-01-01 08:02:04.8] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:02:04.-1250747004] [HCI]send cmd event:0x2, opcode:0x402, cmd:0xb6f9abd8
[1970-01-01 08:02:04.8] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:02:04.482528] [HCI]send cmd event:0x2, opcode:0x1c07, cmd:0xb6f96658
[1970-01-01 08:02:04.8] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:02:04.-1250747024] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f9a780
[1970-01-01 08:02:04.-1225148140] gle execute cmd cbk opscode:0xc06,ret:0
[1970-01-01 08:02:04.1728185349] opcode = 0x0c06, cmd_result = 0x0
[1970-01-01 08:02:04.-1250747400] max_adv_data_len = 0x00fb
[1970-01-01 08:02:04.1] gle read maximum adv data len
[1970-01-01 08:02:04.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f9a740, TIME=2000
[1970-01-01 08:02:04.0] hci cmd send opcode:0x40a paramlen=0x0
[1970-01-01 08:02:04.479232] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:02:04.172589] [HCI]send cmd event:0x2, opcode:0xc07, cmd:0xb6f96688
[1970-01-01 08:02:04.8] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:02:04.-1250747024] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f9a740
[1970-01-01 08:02:04.1] gle execute cmd cbk opscode:0x40a,ret:0
[1970-01-01 08:02:04.1728185349] opcode = 0x040a, cmd_result = 0x0
[1970-01-01 08:02:04.-1250747400] read access filter list size = 16
[1970-01-01 08:02:04.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f96550, TIME=2000
[1970-01-01 08:02:04.0] hci cmd send opcode:0x406 paramlen=0x0
[1970-01-01 08:02:04.479232] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:02:04.-1250747024] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f96550
[1970-01-01 08:02:04.1] gle execute cmd cbk opscode:0x406,ret:0
[1970-01-01 08:02:04.1728185349] opcode = 0x0406, cmd_result = 0x0
[1970-01-01 08:02:04.-1250747400] get addr:0x00:01:**:**:**:74
[1970-01-01 08:02:04.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f9a780, TIME=2000
[1970-01-01 08:02:04.0] hci cmd send opcode:0x402 paramlen=0x0
[1970-01-01 08:02:04.479232] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:02:04.-1250747024] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f9a780
[1970-01-01 08:02:04.1] gle execute cmd cbk opscode:0x402,ret:0
[1970-01-01 08:02:04.258177] [gle hci read buffer size] result = 0x0, opindex: 0x00000402
[1970-01-01 08:02:04.258177] [gle hci read buffer size] acb data len: 254 num: 5, icb data len: 0 num: 0
[1970-01-01 08:02:04.172589] [gle manger enable]result = 0x00
[ACore] sle enable cbk in, result:0
[1970-01-01 08:02:04.1970] dev enable ret:0.
[1970-01-01 08:02:04.32] gle acore smp keys memcmp err, data all zero!
[1970-01-01 08:02:04.46] gle acore smp keys memcmp err, data all zero!
[1970-01-01 08:02:04.46] gle acore smp keys memcmp err, data all zero!
[1970-01-01 08:02:04.46] [1970-01-01 08:02:04.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f965d0, TIME=2000
sle sample sle enable success.
gle acore smp keys memcmp err, data all zero!
[1970-01-01 08:02:04.-1242346128] [btsrv] add node successfully, client id 1
[1970-01-01 08:02:04.139255] recover key fail, there is no key
sle enable
sle_comm_init.
[1970-01-01 08:02:04.0] hci cmd send opcode:0x1c07 paramlen=0x0
[ssap client] init data
[1970-01-01 08:02:04.479232] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:02:04.1728185349] [HCI]send cmd event:0x2, opcode:0x1001, cmd:0xb6f96778
[1970-01-01 08:02:04.8] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:02:04.-1250747024] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f965d0
[1970-01-01 08:02:04.1] gle execute cmd cbk opscode:0x1c07,ret:0
[1970-01-01 08:02:04.-1225304799] opcode = 0x1c07, cmd_result = 0x0
[1970-01-01 08:02:04.-1250747408] [GLE SM] algo: 0x02 0x02 0x02 0x00
[1970-01-01 08:02:04.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f964f0, TIME=2000
[1970-01-01 08:02:04.0] hci cmd send opcode:0xc07 paramlen=0x0
[1970-01-01 08:02:04.479232] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:02:04.-1250747024] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f964f0
[1970-01-01 08:02:04.1] gle execute cmd cbk opscode:0xc07,ret:0
[1970-01-01 08:02:04.1728185349] opcode = 0x0c07, cmd_result = 0x0
[1970-01-01 08:02:04.-1250747400] supported_adv_sets_num = 0x8
[1970-01-01 08:02:04.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f9a740, TIME=2000
[1970-01-01 08:02:04.0] hci cmd send opcode:0x1001 paramlen=0x8
[1970-01-01 08:02:04.479232] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:02:04.-1250747024] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f9a740
[1970-01-01 08:02:04.1] gle execute cmd cbk opscode:0x1001,ret:0
[1970-01-01 08:02:04.8] opcode = 0x1001, cmd_result = 0x0
[1970-01-01 08:02:04.1] [dd]event = 0x8
[1970-01-01 08:02:04.1728185349] [SLE SCAN CBK] event: 8.
[1970-01-01 08:02:04.24321392] start device seek.
[1970-01-01 08:02:04.-1225353999] gle hci command check send check and send, cmd_num:0x1
[1970-01-01 08:02:04.-1250747024] [HCI]send cmd event:0x2, opcode:0x1002, cmd:0xb6f9ab48
[1970-01-01 08:02:04.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f965b0, TIME=2000
[1970-01-01 08:02:04.0] hci cmd send opcode:0x1002 paramlen=0x2
[1970-01-01 08:02:04.479232] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:02:04.-1250747024] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f965b0
[1970-01-01 08:02:04.-1225148140] gle execute cmd cbk opscode:0x1002,ret:0
[1970-01-01 08:02:04.8] opcode = 0x1002, cmd_result = 0x0
[1970-01-01 08:02:04.-1250747392] gle dd set scan enable cfm scan enabled
[1970-01-01 08:02:04.1728185349] [dd]event = 0x9
[1970-01-01 08:02:04.1728185349] [SLE SCAN CBK] event: 9.
sle sample seek enable status: 00.
[1970-01-01 08:02:04.-1225353999] gle hci command check send check and send, cmd_num:0x1
^C接收到信号 2
[1970-01-01 08:04:25.16846945] stop device seek.
[1970-01-01 08:04:25.16846945] stop device seek.
[1970-01-01 08:04:25.1] discovery id is invalid.
[ACore] sle stop announce in, adv_id:1
[1970-01-01 08:04:25.25] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:2
[1970-01-01 08:04:25.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:3
[1970-01-01 08:04:25.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:4
[1970-01-01 08:04:25.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:5
[1970-01-01 08:04:25.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:6
[1970-01-01 08:04:25.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:7
[1970-01-01 08:04:25.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:8
[1970-01-01 08:04:25.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:9
[1970-01-01 08:04:25.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:a
[1970-01-01 08:04:25.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:b
[1970-01-01 08:04:25.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:c
[1970-01-01 08:04:25.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:d
[1970-01-01 08:04:25.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:e
[1970-01-01 08:04:25.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:f
[1970-01-01 08:04:25.52] discovery id is not active, please set param first.
[ACore] sle stop announce in, adv_id:10
[1970-01-01 08:04:25.52] discovery id is not active, please set param first.
[1970-01-01 08:04:25.-1225143712] ssapc client deinit
[1970-01-01 08:04:25.20] gle_deinit_config enter.
[1970-01-01 08:04:25.-1250747024] [HCI]send cmd event:0x2, opcode:0x1002, cmd:0xb6f9aba8
[1970-01-01 08:04:25.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f964b0, TIME=2000
[1970-01-01 08:04:25.0] hci cmd send opcode:0x1002 paramlen=0x2
[1970-01-01 08:04:25.479232] gle hci command check send check andsle_misc_dev_release:208
 send, cmd_num:0x0
[1970-01-01 08:04:2plat_soc:W]bsle_open_close_cmd, service[2], type[0].
5.-1250747024] [HCI]send cmd event:0x2, [HCC] start hcc_adapt_bsle_msg_rx_proc,type:4,device_msg:3
opcode:0x1002, cmd:0xb6f9ab48
[1970-01[HCC] Get bsle device action msg, type=[3]
-01 08:04:25.8] gle hci command check se sle btc close finish
nd check and send, cmd_num:0x0
[1970-0sle set sle state 0
1-01 08:04:25.-1250747024] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f964b0
[1970-01-01 08:04:25.-1225148140] gle execute cmd cbk opscode:0x1002,ret:0
[1970-01-01 08:04:25.8] opcode = 0x1002, cmd_result = 0x0
[1970-01-01 08:04:25.-1250747392] gle dd set scan enable cfm scan disabled
[1970-01-01 08:04:25.1728185349] [dd]event = 0xa
[1970-01 sle_close time:70
-01 08:04:25.1728185349] [SLE SCAN CBK] event: 10.
sle sample seek disable status: 00.
[1970-01-01 08:04:25.0] [TIMRE_ADD][STACK_TIMER] TIMER=0xb6f965f0, TIME=2000
[1970-01-01 08:04:25.0] hci cmd send opcode:0x1002 paramlen=0x2
[1970-01-01 08:04:25.479232] gle hci command check send check and send, cmd_num:0x0
[1970-01-01 08:04:25.-1250747024] [TIMER_DEL][STACK_TIMER] TIMER=0xb6f965f0
[1970-01-01 08:04:25.1] gle execute cmd cbk opscode:0x1002,ret:0
[1970-01-01 08:04:25.8] opcode = 0x1002, cmd_result = 0xb
[1970-01-01 08:04:25.1] [dd]event = 0xa
[1970-01-01 08:04:25.1728185349] [SLE SCAN CBK] event: 10.
[1970-01-01 08:04:25.-1225353999] gle hci command check send check and send, cmd_num:0x1
sle sample seek disable status: 0b.
[1970-01-01 08:04:25.0] [uapi gle_disable]
[1970-01-01 08:04:25.157435] [gle manger disable] enter reset
main end.