- 收藏
- 点赞
- 分享
- 举报
请教NFS加载内核过程中系统卡死的问题
RV1126在uboot状态下,通过以太网导入zImage和dtb后,在kernel加载过程中,打印以下的信息就宕机了,请大家不吝赐教!先谢谢了!
[ 1.010410] ======== Card detection to detect SDIO card! ========
[ 1.010435] mmc1:mmc host rescan start!
[ 1.576972] phy phy-ff4c0000.usb2-phy.1: charger = USB_SDP_CHARGER
[ 1.630294] gsl_ts_probe—1377, i2c_master_recv fail
[ 1.630523] ret=0
[ 1.630613] rkcif rkcif_mipi_lvds: clear unready subdev num: 1
[ 1.630656] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 1.633922] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 1.634009] rkcif_mipi_lvds: Async subdev notifier completed
[ 1.637185] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 1.638506] rk_gmac-dwmac ffc40000.ethernet: rk_get_eth_addr: mac address: aa:94:41:96:c4:fa
[ 1.638573] rk_gmac-dwmac ffc40000.ethernet: device MAC address aa:94:41:96:c4:fa
[ 1.638597] dwmac4: Master AXI performs any burst length
[ 1.638629] rk_gmac-dwmac ffc40000.ethernet eth0: No Safety Features support found
[ 1.638670] rk_gmac-dwmac ffc40000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 1.639108] rk_gmac-dwmac ffc40000.ethernet eth0: registered PTP clock
[ 2.644734] rk_gmac-dwmac ffc40000.ethernet eth0: Link is Up - 10Mbps/Half - flow control off
[ 2.666965] IP-Config: Guessing netmask 255.255.255.0
[ 2.667025] IP-Config: Complete:
[ 2.667060] device=eth0, hwaddr=aa:94:41:96:c4:fa, ipaddr=192.168.0.50, mask=255.255.255.0, gw=255.255.255.255
[ 2.667085] host=192.168.0.50, domain=, nis-domain=(none)
[ 2.667109] bootserver=255.255.255.255, rootserver=192.168.0.123, rootpath=
[ 2.667499] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.674865] cfg80211: Loaded X.509 cert ‘sforshee: 00b28ddf47aef9cea7’
[ 2.675203] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.675252] cfg80211: failed to load regulatory.db
[ 2.676614] rkisp rkisp-vir0: clear unready subdev num: 1
[ 2.679387] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 2.679420] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 2.679438] rkisp0: Invalid mipi data type
[ 2.679447] rkisp0: update sensor failed
[ 2.679891] dwmmc_rockchip ffc50000.dwmmc: Successfully tuned phase to 180
[ 2.680760] dwmmc_rockchip ffc50000.dwmmc: Successfully tuned phase to 90
u 2.681169]
附件是具体的打印信息
Markdown 语法
- 加粗**内容**
- 斜体*内容*
- 删除线~~内容~~
- 引用> 引用内容
- 代码`代码`
- 代码块```编程语言↵代码```
- 链接[链接标题](url)
- 无序列表- 内容
- 有序列表1. 内容
- 缩进内容
- 图片![alt](url)
-
2018-10-16 16:52:28
-
2013-11-27 15:32:20
-
2020-03-05 18:03:41
-
2016-03-28 08:29:17
-
2019-01-28 10:55:08
-
2018-12-05 16:30:05
-
2023-02-22 11:42:34
-
2019-03-30 17:05:11
-
2013-08-26 12:03:33
-
2023-12-12 16:55:43
-
2023-02-03 09:18:38
-
2021-05-18 23:31:26
-
2016-03-03 18:21:09
-
2019-12-04 15:53:09
-
2023-08-30 18:37:42
-
2017-10-25 15:50:33
-
2015-09-18 10:47:52
-
2019-10-30 15:09:08
-
2016-11-09 11:14:20
-
5Hi3516CV610 如何使用SD卡升级固件
-
5cat /dev/logmpp 报错 <3>[ vi] [func]:vi_send_frame_node [line]:99 [info]:vi pic queue is full!
-
50如何获取vpss chn的图像修改后发送至vo
-
5FPGA通过Bt1120传YUV422数据过来,vi接收不到数据——3516dv500
-
50SS928 运行PQtools 拼接 推到设备里有一半画面会异常
-
53536AV100的sample_vdec输出到CVBS显示
-
10海思板子mpp怎么在vi阶段改变视频数据尺寸
-
10HI3559AV100 多摄像头同步模式
-
9海思ss928单路摄像头vio中加入opencv处理并显示
-
10EB-RV1126-BC-191板子运行自己编码的程序
举报类型
- 内容涉黄/赌/毒
- 内容侵权/抄袭
- 政治相关
- 涉嫌广告
- 侮辱谩骂
- 其他
详细说明