编译imx415固件，cif报错

报错信息如下:
[root@RV1126_RV1109:~]# dmesg | grep -i cif
[ 0.435371] rkcifhw ffae0000.rkcif: no iommu attached, using non-iommu buffers
[ 0.435423] rkcifhw ffae0000.rkcif: assigned reserved memory node isp
[ 0.435618] rkcif rkcif_dvp: rkcif driver version: v00.01.09
[ 0.435735] rkcif rkcif_dvp: attach to cif hw node
[ 0.435758] rkcif rkcif_dvp: no iommu attached, using non-iommu buffers
[ 0.435789] rkcif rkcif_dvp: assigned reserved memory node isp
[ 0.436290] rkcif_dvp: Failed to register subdev notifier(-19)
[ 0.436743] rkcif rkcif_dvp: detach to cif hw node
[ 0.436860] rkcif rkcif_mipi_lvds: rkcif driver version: v00.01.09
[ 0.436972] rkcif rkcif_mipi_lvds: attach to cif hw node
[ 0.436993] rkcif rkcif_mipi_lvds: no iommu attached, using non-iommu buffers
[ 0.437033] rkcif rkcif_mipi_lvds: assigned reserved memory node isp
[ 0.438063] rkcif rkcif_mipi_lvds: Entity type for entity rockchip-mipi-csi2 was not initialized!
[ 0.441467] rkisp rkisp-vir0: No memory-region-thunderboot specified
[ 0.444760] rkisp rkisp-vir1: No memory-region-thunderboot specified
[ 0.757586] rkcif rkcif_mipi_lvds: clear unready subdev num: 1
[ 0.758170] rkcif_mipi_lvds: Async subdev notifier completed
[ 1.141135] udevd[118]: specified group ‘kvm’ unknown
[ 1.422397] stream_cif_mipi_id0: update sensor info failed -19
[ 1.428501] stream_cif_mipi_id1: update sensor info failed -19
[ 1.432804] stream_cif_mipi_id3: update sensor info failed -19
[ 1.445559] stream_cif_mipi_id2: update sensor info failed -19

内核日志:
[BEGIN] 2021/8/14 20:08:32
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created CMA memory pool at 0x7f800000, size 8 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x78000000, size 92 MiB
[ 0.000000] OF: reserved mem: initialized node isp, compatible id shared-dma-pool
[ 0.000000] On node 0 totalpages: 523704
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 261560 pages, LIFO batch:63
[ 0.000000] HighMem zone: 262144 pages, LIFO batch:63
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 15 pages/cpu s32140 r8192 d21108 u61440
[ 0.000000] pcpu-alloc: s32140 r8192 d21108 u61440 alloc=154096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 521656
[ 0.000000] Kernel command line: user_debug=31 storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal rootwait earlycon=uart8250,mmio32,0xff570000 console=ttyFIQ0 root=PARTUUID=614e0000-0000 rootfstype=ext4 snd_aloop.index=7
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1959400K/2094816K available (8192K kernel code, 331K rwdata, 1900K rodata, 1024K init, 895K bss, 33016K reserved, 102400K cma-reserved, 945440K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xb0000000 - 0xf0000000 (1024 MB)
[ 0.000000] pkmap : 0xafe00000 - 0xb0000000 ( 2 MB)
[ 0.000000] modules : 0xaf000000 - 0xafe00000 ( 14 MB)
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (9184 kB)
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 332 kB)
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 896 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: random: get_random_bytes called from start_kernel+0x324/0x4a4 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000752] Switching to timer-based delay loop, resolution 41ns
[ 0.002537] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 0.003492] pid_max: default: 4096 minimum: 301
[ 0.004101] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004725] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.006067] CPU: Testing write buffer coherency: ok
[ 0.006885] /cpus/cpu@f00 missing clock-frequency property
[ 0.007411] /cpus/cpu@f01 missing clock-frequency property
[ 0.007930] /cpus/cpu@f02 missing clock-frequency property
[ 0.008450] /cpus/cpu@f03 missing clock-frequency property
[ 0.008963] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[ 0.010240] Setting up static identity map for 0x100000 - 0x100060
[ 0.010980] rcu: Hierarchical SRCU implementation.
[ 0.012058] smp: Bringing up secondary CPUs …
[ 0.013414] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[ 0.014419] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[ 0.015360] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[ 0.015492] smp: Brought up 1 node, 4 CPUs
[ 0.017535] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 0.018114] CPU: All CPU(s) started in SVC mode.
[ 0.019553] devtmpfs: initialized
[ 0.045992] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.047367] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.048276] futex hash table entries: 16 (order: -2, 1024 bytes)
[ 0.048966] pinctrl core: initialized pinctrl subsystem
[ 0.050703] NET: Registered protocol family 16
[ 0.051771] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.054474] cpuidle: using governor menu
[ 0.054875] Registered FIQ tty driver
[ 0.055754] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.056494] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.059395] console [pstore-1] enabled
[ 0.060003] pstore: Registered ramoops as persistent store backend
[ 0.060641] ramoops: attached 0x100000@0x8000000, ecc: 0/0
[ 0.089514] gpio gpiochip0: (gpio0): added GPIO chardev (254:0)
[ 0.089648] gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (gpio0)
[ 0.089863] gpio gpiochip1: (gpio1): added GPIO chardev (254:1)
[ 0.089981] gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (gpio1)
[ 0.090188] gpio gpiochip2: (gpio2): added GPIO chardev (254:2)
[ 0.090303] gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (gpio2)
[ 0.090495] gpio gpiochip3: (gpio3): added GPIO chardev (254:3)
[ 0.090617] gpiochip_setup_dev: registered GPIOs 96 to 127 on device: gpiochip3 (gpio3)
[ 0.090859] gpio gpiochip4: (gpio4): added GPIO chardev (254:4)
[ 0.090981] gpiochip_setup_dev: registered GPIOs 128 to 129 on device: gpiochip4 (gpio4)
[ 0.108621] cryptd: max_cpu_qlen set to 1000
[ 0.109907] fiq debugger fiq mode enabled
[ 0.110678] console [ttyFIQ0] enabled
[ 0.111359] bootconsole [uart8250] disabled
[ 0.112039] Registered fiq debugger ttyFIQ0
[ 0.112727] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[ 0.113903] of_get_named_gpiod_flags: can’t parse ‘gpio’ property of node ‘/vccsys[0]’
[ 0.114357] of_get_named_gpiod_flags: can’t parse ‘gpio’ property of node ‘/vcc-1v8[0]’
[ 0.114773] of_get_named_gpiod_flags: can’t parse ‘gpio’ property of node ‘/vcc-dvdd[0]’
[ 0.115191] of_get_named_gpiod_flags: can’t parse ‘gpio’ property of node ‘/vcc33sys[0]’
[ 0.115714] of_get_named_gpiod_flags: parsed ‘gpio’ property of node ‘/vcc-sd[0]’ - status (0)
[ 0.115819] vcc_sd: supplied by vcc3v3_sys
[ 0.116305] of_get_named_gpiod_flags: can’t parse ‘gpio’ property of node ‘/vdd-logic-npu-vepu-fixed[0]’
[ 0.117283] rk_iommu ffb00f00.iommu: version = 1
[ 0.117984] rk_iommu ffb20800.iommu: version = 1
[ 0.118456] rk_iommu ffb60e00.iommu: version = 1
[ 0.119001] rk_iommu ffb80480.iommu: version = 1
[ 0.119469] rk_iommu ffb90800.iommu: version = 1
[ 0.119879] rk_iommu ffbb0f00.iommu: version = 1
[ 0.120829] SCSI subsystem initialized
[ 0.121144] usbcore: registered new interface driver usbfs
[ 0.121241] usbcore: registered new interface driver hub
[ 0.121379] usbcore: registered new device driver usb
[ 0.121488] media: Linux media interface: v0.10
[ 0.121565] videodev: Linux video capture interface: v2.00
[ 0.121643] pps_core: LinuxPPS API ver. 1 registered
[ 0.121668] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.121712] PTP clock support registered
[ 0.123118] Advanced Linux Sound Architecture Driver Initialized.
[ 0.123807] Bluetooth: Core ver 2.22
[ 0.123892] NET: Registered protocol family 31
[ 0.123918] Bluetooth: HCI device and connection manager initialized
[ 0.123949] Bluetooth: HCI socket layer initialized
[ 0.123978] Bluetooth: L2CAP socket layer initialized
[ 0.124037] Bluetooth: SCO socket layer initialized
[ 0.124543] rockchip-cpuinfo cpuinfo: SoC : 11260000
[ 0.124579] rockchip-cpuinfo cpuinfo: Serial : 584db0d9e7039c9b
[ 0.125507] clocksource: Switched to clocksource arch_sys_counter
[ 0.128047] NET: Registered protocol family 2
[ 0.129077] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.129131] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.129299] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.129506] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.129667] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.129743] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.129987] NET: Registered protocol family 1
[ 0.131745] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 0.134437] Initialise system trusted keyrings
[ 0.134694] workingset: timestamp_bits=29 max_order=19 bucket_order=0
[ 0.142236] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.145031] Key type asymmetric registered
[ 0.145064] Asymmetric key parser ‘x509’ registered
[ 0.145139] bounce: pool size: 64 pages
[ 0.145214] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.145245] io scheduler noop registered
[ 0.145268] io scheduler deadline registered
[ 0.145435] io scheduler cfq registered (default)
[ 0.145464] io scheduler mq-deadline registered
[ 0.145521] io scheduler kyber registered
[ 0.145690] io scheduler bfq registered
[ 0.149015] rockchip-usb2phy-naneng ff4c0000.usb2-phy: GPIO lookup for consumer vup
[ 0.149027] rockchip-usb2phy-naneng ff4c0000.usb2-phy: using device tree for GPIO lookup
[ 0.149067] of_get_named_gpiod_flags: parsed ‘vup-gpios’ property of node ‘/usb2-phy@ff4c0000[0]’ - status (0)
[ 0.149097] gpio gpiochip0: Persistence not supported for GPIO 17
[ 0.149985] phy phy-ff4c0000.usb2-phy.1: Failed to get VBUS supply regulator
[ 0.151640] rockchip-usb2phy-naneng ff4c8000.usb2-phy: GPIO lookup for consumer vup
[ 0.151653] rockchip-usb2phy-naneng ff4c8000.usb2-phy: using device tree for GPIO lookup
[ 0.151678] of_get_named_gpiod_flags: can’t parse ‘vup-gpios’ property of node ‘/usb2-phy@ff4c8000[0]’
[ 0.151699] of_get_named_gpiod_flags: can’t parse ‘vup-gpio’ property of node ‘/usb2-phy@ff4c8000[0]’
[ 0.151711] rockchip-usb2phy-naneng ff4c8000.usb2-phy: using lookup tables for GPIO lookup
[ 0.151722] rockchip-usb2phy-naneng ff4c8000.usb2-phy: No GPIO consumer vup found
[ 0.155327] mpp_service mpp-srv: 4cdfd25 author: Yandong Lin 2021-02-21 video: rockchip: mpp: Fix irq state err.
[ 0.155374] mpp_service mpp-srv: probe start
[ 0.156406] iommu: Adding device ffb80000.rkvdec to group 3
[ 0.156468] mpp_rkvdec ffb80000.rkvdec: Linked as a consumer to ffb80480.iommu
[ 0.156673] mpp_rkvdec ffb80000.rkvdec: probing start
[ 0.157300] mpp_rkvdec ffb80000.rkvdec: shared_niu_a is not found!
[ 0.157336] rkvdec_init:1182: No niu aclk reset resource define
[ 0.157361] mpp_rkvdec ffb80000.rkvdec: shared_niu_h is not found!
[ 0.157385] rkvdec_init:1185: No niu hclk reset resource define
[ 0.157722] mpp_rkvdec ffb80000.rkvdec: probing finish
[ 0.158420] iommu: Adding device ffbb0000.rkvenc to group 5
[ 0.158476] mpp_rkvenc ffbb0000.rkvenc: Linked as a consumer to ffbb0f00.iommu
[ 0.158772] mpp_rkvenc ffbb0000.rkvenc: probing start
[ 0.159483] mpp_rkvenc ffbb0000.rkvenc: Linked as a consumer to regulator.6
[ 0.159558] mpp_rkvenc ffbb0000.rkvenc: bin=0
[ 0.159616] mpp_rkvenc ffbb0000.rkvenc: leakage=1.750
[ 0.159700] mpp_rkvenc ffbb0000.rkvenc: Failed to get pvtm
[ 0.159751] mpp_rkvenc ffbb0000.rkvenc: bin-scale=37
[ 0.160325] mpp_rkvenc ffbb0000.rkvenc: avs=0
[ 0.160806] mpp_rkvenc ffbb0000.rkvenc: failed to find power_model node
[ 0.160835] mpp_rkvenc ffbb0000.rkvenc: failed to initialize power model
[ 0.161455] mpp_rkvenc ffbb0000.rkvenc: probing finish
[ 0.162124] iommu: Adding device ffb90400.vdpu to group 4
[ 0.162234] mpp_vdpu2 ffb90400.vdpu: Linked as a consumer to ffb90800.iommu
[ 0.162364] mpp_vdpu2 ffb90400.vdpu: probe device
[ 0.162910] mpp_vdpu2 ffb90400.vdpu: reset_group->rw_sem_on=0
[ 0.162961] mpp_vdpu2 ffb90400.vdpu: reset_group->rw_sem_on=0
[ 0.163192] mpp_vdpu2 ffb90400.vdpu: probing finish
[ 0.163839] iommu: Adding device ffb90000.vepu to group 4
[ 0.163896] mpp_vepu2 ffb90000.vepu: Linked as a consumer to ffb90800.iommu
[ 0.164020] mpp_vepu2 ffb90000.vepu: probe device
[ 0.164516] mpp_vepu2 ffb90000.vepu: reset_group->rw_sem_on=0
[ 0.164561] mpp_vepu2 ffb90000.vepu: reset_group->rw_sem_on=0
[ 0.164806] mpp_vepu2 ffb90000.vepu: probing finish
[ 0.165335] iommu: Adding device ffb20000.iep to group 1
[ 0.165393] mpp-iep2 ffb20000.iep: Linked as a consumer to ffb20800.iommu
[ 0.165570] mpp-iep2 ffb20000.iep: probe device
[ 0.166277] mpp-iep2 ffb20000.iep: allocate roi buffer failed
[ 0.166487] mpp-iep2 ffb20000.iep: probing finish
[ 0.166753] mpp_service mpp-srv: probe success
[ 0.172054] dma-pl330 ff4e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.172097] dma-pl330 ff4e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 0.174547] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[ 0.175120] pwm-regulator vdd-npu: GPIO lookup for consumer enable
[ 0.175131] pwm-regulator vdd-npu: using device tree for GPIO lookup
[ 0.175168] of_get_named_gpiod_flags: can’t parse ‘enable-gpios’ property of node ‘/vdd-npu[0]’
[ 0.175190] of_get_named_gpiod_flags: can’t parse ‘enable-gpio’ property of node ‘/vdd-npu[0]’
[ 0.175203] pwm-regulator vdd-npu: using lookup tables for GPIO lookup
[ 0.175214] pwm-regulator vdd-npu: No GPIO consumer enable found
[ 0.175249] pwm-regulator: supplied by vcc5v0_sys
[ 0.175912] pwm-regulator vdd-arm: Failed to get PWM: -16
[ 0.175963] pwm-regulator: probe of vdd-arm failed with error -16
[ 0.176092] pwm-regulator vdd-logic-npu-vepu: GPIO lookup for consumer enable
[ 0.176103] pwm-regulator vdd-logic-npu-vepu: using device tree for GPIO lookup
[ 0.176125] of_get_named_gpiod_flags: can’t parse ‘enable-gpios’ property of node ‘/vdd-logic-npu-vepu[0]’
[ 0.176145] of_get_named_gpiod_flags: can’t parse ‘enable-gpio’ property of node ‘/vdd-logic-npu-vepu[0]’
[ 0.176156] pwm-regulator vdd-logic-npu-vepu: using lookup tables for GPIO lookup
[ 0.176167] pwm-regulator vdd-logic-npu-vepu: No GPIO consumer enable found
[ 0.176195] pwm-regulator: supplied by vcc3v3_sys
[ 0.177049] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 0.177960] ff560000.serial: ttyS0 at MMIO 0xff560000 (irq = 34, base_baud = 1500000) is a 16550A
[ 0.180668] random: fast init done
[ 0.181188] random: crng init done
[ 0.181299] iommu: Adding device ffb00000.vop to group 0
[ 0.181358] rockchip-vop ffb00000.vop: Linked as a consumer to ffb00f00.iommu
[ 0.185641] rockchip-drm display-subsystem: Linked as a consumer to ffb00000.vop
[ 0.186770] rockchip-drm display-subsystem: Linked as a consumer to ffb30000.dsi
[ 0.188149] rockchip-drm display-subsystem: devfreq is not set
[ 0.188620] rockchip-drm display-subsystem: bound ffb00000.vop (ops 0xb093bd80)
[ 0.188696] dw-mipi-dsi ffb30000.dsi: [drm:dw_mipi_dsi_bind] ERROR Failed to find panel or bridge: -517
[ 0.188735] rockchip-drm display-subsystem: failed to bind ffb30000.dsi (ops 0xb09424ac): -517
[ 0.189054] rockchip-drm display-subsystem: master bind failed: -517
[ 0.194312] panel-simple-dsi ffb30000.dsi.0: ffb30000.dsi.0 supply power not found, using dummy regulator
[ 0.194429] panel-simple-dsi ffb30000.dsi.0: Linked as a consumer to regulator.0
[ 0.194482] panel-simple-dsi ffb30000.dsi.0: ffb30000.dsi.0 supply vsp not found, using dummy regulator
[ 0.194597] panel-simple-dsi ffb30000.dsi.0: ffb30000.dsi.0 supply vsn not found, using dummy regulator
[ 0.194676] panel-simple-dsi ffb30000.dsi.0: GPIO lookup for consumer enable
[ 0.194686] panel-simple-dsi ffb30000.dsi.0: using device tree for GPIO lookup
[ 0.194715] of_get_named_gpiod_flags: can’t parse ‘enable-gpios’ property of node ‘/dsi@ffb30000/panel@0[0]’
[ 0.194737] of_get_named_gpiod_flags: can’t parse ‘enable-gpio’ property of node ‘/dsi@ffb30000/panel@0[0]’
[ 0.194750] panel-simple-dsi ffb30000.dsi.0: using lookup tables for GPIO lookup
[ 0.194760] panel-simple-dsi ffb30000.dsi.0: No GPIO consumer enable found
[ 0.194772] panel-simple-dsi ffb30000.dsi.0: GPIO lookup for consumer reset
[ 0.194781] panel-simple-dsi ffb30000.dsi.0: using device tree for GPIO lookup
[ 0.194803] of_get_named_gpiod_flags: can’t parse ‘reset-gpios’ property of node ‘/dsi@ffb30000/panel@0[0]’
[ 0.194824] of_get_named_gpiod_flags: can’t parse ‘reset-gpio’ property of node ‘/dsi@ffb30000/panel@0[0]’
[ 0.194835] panel-simple-dsi ffb30000.dsi.0: using lookup tables for GPIO lookup
[ 0.194845] panel-simple-dsi ffb30000.dsi.0: No GPIO consumer reset found
[ 0.195905] zram: Added device: zram0
[ 0.197911] mdio_bus fixed-0: GPIO lookup for consumer reset
[ 0.197923] mdio_bus fixed-0: using lookup tables for GPIO lookup
[ 0.197933] mdio_bus fixed-0: No GPIO consumer reset found
[ 0.197971] libphy: Fixed MDIO Bus: probed
[ 0.199966] rk_gmac-dwmac ffc40000.ethernet: no regulator found
[ 0.200013] rk_gmac-dwmac ffc40000.ethernet: clock input or output? (input).
[ 0.200036] rk_gmac-dwmac ffc40000.ethernet: TX delay(0x2a).
[ 0.200065] rk_gmac-dwmac ffc40000.ethernet: RX delay(0x1a).
[ 0.200096] rk_gmac-dwmac ffc40000.ethernet: integrated PHY? (no).
[ 0.200185] rk_gmac-dwmac ffc40000.ethernet: clock input from PHY
[ 0.205233] rk_gmac-dwmac ffc40000.ethernet: init for RGMII
[ 0.205560] rk_gmac-dwmac ffc40000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[ 0.205596] rk_gmac-dwmac ffc40000.ethernet: DWMAC4/5
[ 0.205626] rk_gmac-dwmac ffc40000.ethernet: DMA HW capability register supported
[ 0.205654] rk_gmac-dwmac ffc40000.ethernet: RX Checksum Offload Engine supported
[ 0.205680] rk_gmac-dwmac ffc40000.ethernet: TX Checksum insertion supported
[ 0.205705] rk_gmac-dwmac ffc40000.ethernet: Wake-Up On Lan supported
[ 0.205782] rk_gmac-dwmac ffc40000.ethernet: TSO supported
[ 0.205804] rk_gmac-dwmac ffc40000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 0.205835] rk_gmac-dwmac ffc40000.ethernet: TSO feature enabled
[ 0.206012] mdio_bus stmmac-0: GPIO lookup for consumer reset
[ 0.206021] mdio_bus stmmac-0: using device tree for GPIO lookup
[ 0.206047] of_get_named_gpiod_flags: can’t parse ‘reset-gpios’ property of node ‘/ethernet@ffc40000/mdio[0]’
[ 0.206066] of_get_named_gpiod_flags: can’t parse ‘reset-gpio’ property of node ‘/ethernet@ffc40000/mdio[0]’
[ 0.206078] mdio_bus stmmac-0: using lookup tables for GPIO lookup
[ 0.206089] mdio_bus stmmac-0: No GPIO consumer reset found
[ 0.206125] of_get_named_gpiod_flags: parsed ‘snps,reset-gpio’ property of node ‘/ethernet@ffc40000[0]’ - status (0)
[ 0.338887] libphy: stmmac: probed
[ 0.339567] of_get_named_gpiod_flags: can’t parse ‘reset-gpios’ property of node ‘/ethernet@ffc40000/mdio/phy@0[0]’
[ 0.342496] dwc3 ffd00000.dwc3: Failed to get clk ‘ref’: -2
[ 0.348039] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 0.348079] ehci-platform: EHCI generic platform driver
[ 0.351694] ehci-platform ffe00000.usb: EHCI Host Controller
[ 0.351761] ehci-platform ffe00000.usb: new USB bus registered, assigned bus number 1
[ 0.351966] ehci-platform ffe00000.usb: irq 69, io mem 0xffe00000
[ 0.362232] ehci-platform ffe00000.usb: USB 2.0 started, EHCI 1.00
[ 0.362546] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.362580] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.362607] usb usb1: Product: EHCI Host Controller
[ 0.362636] usb usb1: Manufacturer: Linux 4.19.111 ehci_hcd
[ 0.362662] usb usb1: SerialNumber: ffe00000.usb
[ 0.363465] hub 1-0:1.0: USB hub found
[ 0.363542] hub 1-0:1.0: 1 port detected
[ 0.364291] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 0.364360] ohci-platform: OHCI generic platform driver
[ 0.364915] ohci-platform ffe10000.usb: Generic Platform OHCI controller
[ 0.364979] ohci-platform ffe10000.usb: new USB bus registered, assigned bus number 2
[ 0.365176] ohci-platform ffe10000.usb: irq 70, io mem 0xffe10000
[ 0.423140] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 0.423175] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.423197] usb usb2: Product: Generic Platform OHCI controller
[ 0.423245] usb usb2: Manufacturer: Linux 4.19.111 ohci_hcd
[ 0.423270] usb usb2: SerialNumber: ffe10000.usb
[ 0.424013] hub 2-0:1.0: USB hub found
[ 0.424097] hub 2-0:1.0: 1 port detected
[ 0.425863] usbcore: registered new interface driver usb-storage
[ 0.426669] i2c /dev entries driver
[ 0.432499] ircut cam_ircut: driver version: 00.01.00
[ 0.432771] ircut cam_ircut: failed get pulse-width,use dafult value 100
[ 0.432801] ircut cam_ircut: GPIO lookup for consumer ircut-open
[ 0.432810] ircut cam_ircut: using device tree for GPIO lookup
[ 0.432869] of_get_named_gpiod_flags: parsed ‘ircut-open-gpios’ property of node ‘/cam_ircut[0]’ - status (0)
[ 0.432896] gpio gpiochip2: Persistence not supported for GPIO 7
[ 0.432924] ircut cam_ircut: GPIO lookup for consumer ircut-close
[ 0.432933] ircut cam_ircut: using device tree for GPIO lookup
[ 0.432966] of_get_named_gpiod_flags: parsed ‘ircut-close-gpios’ property of node ‘/cam_ircut[0]’ - status (0)
[ 0.432985] gpio gpiochip2: Persistence not supported for GPIO 6
[ 0.433006] ircut cam_ircut: GPIO lookup for consumer led
[ 0.433015] ircut cam_ircut: using device tree for GPIO lookup
[ 0.433036] of_get_named_gpiod_flags: can’t parse ‘led-gpios’ property of node ‘/cam_ircut[0]’
[ 0.433055] of_get_named_gpiod_flags: can’t parse ‘led-gpio’ property of node ‘/cam_ircut[0]’
[ 0.433067] ircut cam_ircut: using lookup tables for GPIO lookup
[ 0.433078] ircut cam_ircut: No GPIO consumer led found
[ 0.433107] ircut cam_ircut: probe successful!
[ 0.433702] ERROR: could not get clock /mipi-csi2@ffb10000:srst_csihost_p(1)
[ 0.433736] rockchip-mipi-csi2: failed to get rst clock, maybe useless
[ 0.433984] rockchip-mipi-csi2: probe success, v4l2_dev:(null)!
[ 0.435371] rkcifhw ffae0000.rkcif: no iommu attached, using non-iommu buffers
[ 0.435423] rkcifhw ffae0000.rkcif: assigned reserved memory node isp
[ 0.435618] rkcif rkcif_dvp: rkcif driver version: v00.01.09
[ 0.435735] rkcif rkcif_dvp: attach to cif hw node
[ 0.435758] rkcif rkcif_dvp: no iommu attached, using non-iommu buffers
[ 0.435789] rkcif rkcif_dvp: assigned reserved memory node isp
[ 0.436290] rkcif_dvp: Failed to register subdev notifier(-19)
[ 0.436743] rkcif rkcif_dvp: detach to cif hw node
[ 0.436860] rkcif rkcif_mipi_lvds: rkcif driver version: v00.01.09
[ 0.436972] rkcif rkcif_mipi_lvds: attach to cif hw node
[ 0.436993] rkcif rkcif_mipi_lvds: no iommu attached, using non-iommu buffers
[ 0.437033] rkcif rkcif_mipi_lvds: assigned reserved memory node isp
[ 0.438063] rkcif rkcif_mipi_lvds: Entity type for entity rockchip-mipi-csi2 was not initialized!
[ 0.440460] rkisp_hw ffb50000.rkisp: is_thunderboot: 0
[ 0.440502] rkisp_hw ffb50000.rkisp: Missing rockchip,grf property
[ 0.440855] rkisp_hw ffb50000.rkisp: iommu is disabled, using non-iommu buffers
[ 0.440903] rkisp_hw ffb50000.rkisp: assigned reserved memory node isp
[ 0.441221] rkisp rkisp-vir0: rkisp driver version: v01.04.01
[ 0.441326] rkisp rkisp-vir0: GPIO lookup for consumer vsirq
[ 0.441336] rkisp rkisp-vir0: using device tree for GPIO lookup
[ 0.441363] of_get_named_gpiod_flags: can’t parse ‘vsirq-gpios’ property of node ‘/rkisp-vir0[0]’
[ 0.441385] of_get_named_gpiod_flags: can’t parse ‘vsirq-gpio’ property of node ‘/rkisp-vir0[0]’
[ 0.441397] rkisp rkisp-vir0: using lookup tables for GPIO lookup
[ 0.441407] rkisp rkisp-vir0: No GPIO consumer vsirq found
[ 0.441467] rkisp rkisp-vir0: No memory-region-thunderboot specified
[ 0.441713] rkisp rkisp-vir0: Entity type for entity rkisp-isp-subdev was not initialized!
[ 0.441766] rkisp rkisp-vir0: Entity type for entity rkisp-csi-subdev was not initialized!
[ 0.441801] rkisp rkisp-vir0: Entity type for entity rkisp-bridge-ispp was not initialized!
[ 0.444507] rkisp rkisp-vir1: rkisp driver version: v01.04.01
[ 0.444614] rkisp rkisp-vir1: GPIO lookup for consumer vsirq
[ 0.444624] rkisp rkisp-vir1: using device tree for GPIO lookup
[ 0.444648] of_get_named_gpiod_flags: can’t parse ‘vsirq-gpios’ property of node ‘/rkisp-vir1[0]’
[ 0.444668] of_get_named_gpiod_flags: can’t parse ‘vsirq-gpio’ property of node ‘/rkisp-vir1[0]’
[ 0.444680] rkisp rkisp-vir1: using lookup tables for GPIO lookup
[ 0.444690] rkisp rkisp-vir1: No GPIO consumer vsirq found
[ 0.444760] rkisp rkisp-vir1: No memory-region-thunderboot specified
[ 0.444978] rkisp rkisp-vir1: Entity type for entity rkisp-isp-subdev was not initialized!
[ 0.445024] rkisp rkisp-vir1: Entity type for entity rkisp-csi-subdev was not initialized!
[ 0.445057] rkisp rkisp-vir1: Entity type for entity rkisp-bridge-ispp was not initialized!
[ 0.448548] iommu: Adding device ffb60000.rkispp to group 2
[ 0.448613] rkispp_hw ffb60000.rkispp: Linked as a consumer to ffb60e00.iommu
[ 0.449285] rkispp_hw ffb60000.rkispp: max input:1920x1080@30fps
[ 0.449335] rkispp_hw ffb60000.rkispp: can’t request region for resource [mem 0xffb60000-0xffb7ffff]
[ 0.449855] rkispp rkispp-vir0: rkispp driver version: v01.04.01
[ 0.452151] rkispp rkispp-vir1: rkispp driver version: v01.04.01
[ 0.455149] rockchip-iodomain fe020000.syscon:io-domains: Linked as a consumer to regulator.4
[ 0.455272] rockchip-iodomain fe020000.syscon:io-domains: Linked as a consumer to regulator.2
[ 0.458556] rockchip-thermal ff5f0000.tsadc: tsadc trimmed value = -10
[ 0.458977] rockchip-thermal ff5f0000.tsadc: tsadc is probed successfully!
[ 0.459466] rockchip-thermal ff5f8000.tsadc: tsadc trimmed value = -11
[ 0.459732] rockchip-thermal ff5f8000.tsadc: tsadc is probed successfully!
[ 0.460662] Bluetooth: HCI UART driver ver 2.3
[ 0.460696] Bluetooth: HCI UART protocol H4 registered
[ 0.461033] cpu cpu0: bin=0
[ 0.461088] cpu cpu0: leakage=2.0
[ 0.461146] cpu cpu0: Failed to get reg
[ 0.461185] cpu cpu0: bin-scale=5
[ 0.461534] cpuidle: enable-method property ‘psci’ found operations
[ 0.461709] cpuidle: enable-method property ‘psci’ found operations
[ 0.461895] cpuidle: enable-method property ‘psci’ found operations
[ 0.462075] cpuidle: enable-method property ‘psci’ found operations
[ 0.462656] pwrseq_simple sdio-pwrseq: GPIO lookup for consumer reset
[ 0.462668] pwrseq_simple sdio-pwrseq: using device tree for GPIO lookup
[ 0.462707] of_get_named_gpiod_flags: parsed ‘reset-gpios’ property of node ‘/sdio-pwrseq[0]’ - status (0)
[ 0.462733] gpio gpiochip0: Persistence not supported for GPIO 6
[ 0.463178] Synopsys Designware Multimedia Card Interface Driver
[ 0.464144] dwmmc_rockchip ffc50000.dwmmc: IDMAC supports 32-bit address mode.
[ 0.464227] dwmmc_rockchip ffc50000.dwmmc: Using internal DMA controller.
[ 0.464256] dwmmc_rockchip ffc50000.dwmmc: Version ID is 270a
[ 0.464353] dwmmc_rockchip ffc50000.dwmmc: DW MMC controller at irq 64,32 bit host data width,256 deep fifo
[ 0.464437] dwmmc_rockchip ffc50000.dwmmc: GPIO lookup for consumer wp
[ 0.464447] dwmmc_rockchip ffc50000.dwmmc: using device tree for GPIO lookup
[ 0.464471] of_get_named_gpiod_flags: can’t parse ‘wp-gpios’ property of node ‘/dwmmc@ffc50000[0]’
[ 0.464492] of_get_named_gpiod_flags: can’t parse ‘wp-gpio’ property of node ‘/dwmmc@ffc50000[0]’
[ 0.464505] dwmmc_rockchip ffc50000.dwmmc: using lookup tables for GPIO lookup
[ 0.464515] dwmmc_rockchip ffc50000.dwmmc: No GPIO consumer wp found
[ 0.464572] mmc_host mmc0: card is non-removable.
[ 0.477586] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.491407] dwmmc_rockchip ffc60000.dwmmc: IDMAC supports 32-bit address mode.
[ 0.491535] dwmmc_rockchip ffc60000.dwmmc: Using internal DMA controller.
[ 0.491567] dwmmc_rockchip ffc60000.dwmmc: Version ID is 270a
[ 0.491670] dwmmc_rockchip ffc60000.dwmmc: DW MMC controller at irq 65,32 bit host data width,256 deep fifo
[ 0.491905] dwmmc_rockchip ffc60000.dwmmc: Linked as a consumer to regulator.5
[ 0.491976] dwmmc_rockchip ffc60000.dwmmc: GPIO lookup for consumer cd
[ 0.491986] dwmmc_rockchip ffc60000.dwmmc: using device tree for GPIO lookup
[ 0.492015] of_get_named_gpiod_flags: can’t parse ‘cd-gpios’ property of node ‘/dwmmc@ffc60000[0]’
[ 0.492038] of_get_named_gpiod_flags: can’t parse ‘cd-gpio’ property of node ‘/dwmmc@ffc60000[0]’
[ 0.492052] dwmmc_rockchip ffc60000.dwmmc: using lookup tables for GPIO lookup
[ 0.492062] dwmmc_rockchip ffc60000.dwmmc: No GPIO consumer cd found
[ 0.492076] dwmmc_rockchip ffc60000.dwmmc: GPIO lookup for consumer wp
[ 0.492085] dwmmc_rockchip ffc60000.dwmmc: using device tree for GPIO lookup
[ 0.492105] of_get_named_gpiod_flags: can’t parse ‘wp-gpios’ property of node ‘/dwmmc@ffc60000[0]’
[ 0.492124] of_get_named_gpiod_flags: can’t parse ‘wp-gpio’ property of node ‘/dwmmc@ffc60000[0]’
[ 0.492135] dwmmc_rockchip ffc60000.dwmmc: using lookup tables for GPIO lookup
[ 0.492144] dwmmc_rockchip ffc60000.dwmmc: No GPIO consumer wp found
[ 0.526702] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 200000000Hz, actual 198000000HZ div = 0)
[ 0.526777] dwmmc_rockchip ffc50000.dwmmc: Successfully tuned phase to 90
[ 0.528243] mmc0: new HS200 MMC card at address 0001
[ 0.531075] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
[ 0.532436] mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
[ 0.533732] mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
[ 0.534842] mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB, chardev (242:0)
[ 0.550575] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 0.611868] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.625620] dwmmc_rockchip ffc70000.dwmmc: IDMAC supports 32-bit address mode.
[ 0.625757] dwmmc_rockchip ffc70000.dwmmc: Using internal DMA controller.
[ 0.625794] dwmmc_rockchip ffc70000.dwmmc: Version ID is 270a
[ 0.625903] dwmmc_rockchip ffc70000.dwmmc: DW MMC controller at irq 66,32 bit host data width,256 deep fifo
[ 0.626009] dwmmc_rockchip ffc70000.dwmmc: GPIO lookup for consumer wp
[ 0.626019] dwmmc_rockchip ffc70000.dwmmc: using device tree for GPIO lookup
[ 0.626048] of_get_named_gpiod_flags: can’t parse ‘wp-gpios’ property of node ‘/dwmmc@ffc70000[0]’
[ 0.626070] of_get_named_gpiod_flags: can’t parse ‘wp-gpio’ property of node ‘/dwmmc@ffc70000[0]’
[ 0.626083] dwmmc_rockchip ffc70000.dwmmc: using lookup tables for GPIO lookup
[ 0.626094] dwmmc_rockchip ffc70000.dwmmc: No GPIO consumer wp found
[ 0.626155] dwmmc_rockchip ffc70000.dwmmc: allocated mmc-pwrseq
[ 0.626187] mmc_host mmc1: card is non-removable.
[ 0.639195] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.652947] usbcore: registered new interface driver usbhid
[ 0.653010] usbhid: USB HID core driver
[ 0.655390] rockchip-saradc ff5e0000.saradc: Linked as a consumer to regulator.2
[ 0.657642] rksfc_base v1.1 2016-01-08
[ 0.658355] rksfc ffc90000.sfc: rksfc_probe clk rate = 79200000
[ 0.658476] rkflash_dev_init enter
[ 0.658515] sfc nor id: 0 0 0
[ 0.658532] rkflash[1] is invalid
[ 0.658537] rkflash_dev_init enter
[ 0.658566] sfc_nand id: 0 0 0
[ 0.658579] rkflash[2] is invalid
[ 0.671511] NET: Registered protocol family 17
[ 0.671629] NET: Registered protocol family 15
[ 0.671883] Bluetooth: RFCOMM TTY layer initialized
[ 0.671929] Bluetooth: RFCOMM socket layer initialized
[ 0.671983] Bluetooth: RFCOMM ver 1.11
[ 0.672012] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.672045] Bluetooth: HIDP socket layer initialized
[ 0.672067] [BT_RFKILL]: Enter rfkill_rk_init
[ 0.672087] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 0.672755] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[ 0.672860] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6255
[ 0.672917] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[ 0.672945] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[ 0.673011] of_get_named_gpiod_flags: parsed ‘WIFI,poweren_gpio’ property of node ‘/wireless-wlan[0]’ - status (0)
[ 0.673020] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,poweren_gpio = 6 flags = 0.
[ 0.673054] of_get_named_gpiod_flags: can’t parse ‘WIFI,vbat_gpio’ property of node ‘/wireless-wlan[0]’
[ 0.673073] of_get_named_gpiod_flags: can’t parse ‘WIFI,reset_gpio’ property of node ‘/wireless-wlan[0]’
[ 0.673103] of_get_named_gpiod_flags: parsed ‘WIFI,host_wake_irq’ property of node ‘/wireless-wlan[0]’ - status (0)
[ 0.673110] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 8, flags = 0.
[ 0.673141] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[ 0.673164] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[ 0.673195] gpio-6 (reset): gpiod_request: status -16
[ 0.673200] [WLAN_RFKILL]: Failed to get rkwifi_wlan_poweren gpio.
[ 0.673255] wlan-platdata: probe of wireless-wlan failed with error -1
[ 0.673928] of_get_named_gpiod_flags: parsed ‘uart_rts_gpios’ property of node ‘/wireless-bluetooth[0]’ - status (0)
[ 0.673938] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 48.
[ 0.673993] of_get_named_gpiod_flags: parsed ‘BT,power_gpio’ property of node ‘/wireless-bluetooth[0]’ - status (0)
[ 0.674000] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 7.
[ 0.674031] of_get_named_gpiod_flags: can’t parse ‘BT,reset_gpio’ property of node ‘/wireless-bluetooth[0]’
[ 0.674051] of_get_named_gpiod_flags: can’t parse ‘BT,wake_gpio’ property of node ‘/wireless-bluetooth[0]’
[ 0.674081] of_get_named_gpiod_flags: parsed ‘BT,wake_host_irq’ property of node ‘/wireless-bluetooth[0]’ - status (0)
[ 0.674087] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 5.
[ 0.674115] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!.
[ 0.674216] [BT_RFKILL]: Request irq for bt wakeup host
[ 0.674400] [BT_RFKILL]: disable irq
[ 0.674616] [BT_RFKILL]: bt_default device registered.
[ 0.674996] flash vendor_init_thread!
[ 0.675018] flash vendor storage:20170308 ret = -1
[ 0.675996] Registering SWP/SWPB emulation handler
[ 0.678209] Loading compiled-in X.509 certificates
[ 0.680635] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[ 0.680659] rga2: Driver loaded successfully ver:3.02
[ 0.681020] rga2: Module initialized.
[ 0.700053] vendor storage:20190527 ret = 0
[ 0.719033] mmc_host mmc1: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[ 0.724948] rockchip-drm display-subsystem: devfreq is not set
[ 0.725554] rockchip-drm display-subsystem: bound ffb00000.vop (ops 0xb093bd80)
[ 0.725666] rockchip-drm display-subsystem: bound ffb30000.dsi (ops 0xb09424ac)
[ 0.725706] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.725738] [drm] No driver support for vblank timestamp query.
[ 0.742023] [drm] Initialized rockchip 2.0.0 20140818 for display-subsystem on minor 0
[ 0.742932] input: adc-keys as /devices/platform/adc-keys/input/input0
[ 0.749110] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 0.756533] cfg80211: Loaded X.509 cert ‘sforshee: 00b28ddf47aef9cea7’
[ 0.756817] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 0.756879] cfg80211: failed to load regulatory.db
[ 0.757586] rkcif rkcif_mipi_lvds: clear unready subdev num: 1
[ 0.758170] rkcif_mipi_lvds: Async subdev notifier completed
[ 0.758199] rkisp rkisp-vir0: clear unready subdev num: 1
[ 0.758814] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 0.758895] rkisp0: update sensor failed
[ 0.758918] rkisp rkisp-vir1: clear unready subdev num: 3
[ 0.758956] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 0.761203] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 0.761243] rkisp1: update sensor failed
[ 0.761364] ALSA device list:
[ 0.761386] #7: Loopback 1
[ 0.762521] mmc_host mmc1: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[ 0.774780] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[ 0.774894] VFS: Mounted root (ext4 filesystem) readonly on device 179:6.
[ 0.780000] devtmpfs: mounted
[ 0.782136] Freeing unused kernel memory: 1024K
[ 0.783288] Run /sbin/init as init process
[ 0.856059] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
[ 1.131173] udevd[118]: starting version 3.2.7
[ 1.141135] udevd[118]: specified group ‘kvm’ unknown
[ 1.181881] udevd[119]: starting eudev-3.2.7
[ 1.422124] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 1.422397] stream_cif_mipi_id0: update sensor info failed -19
[ 1.428409] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 1.428501] stream_cif_mipi_id1: update sensor info failed -19
[ 1.432728] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 1.432804] stream_cif_mipi_id3: update sensor info failed -19
[ 1.445326] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 1.445559] stream_cif_mipi_id2: update sensor info failed -19
[ 1.509075] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 1.679005] phy phy-ff4c0000.usb2-phy.1: charger = USB_CDP_CHARGER
[ 2.432275] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
[ 2.479398] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
[ 2.521811] EXT4-fs (mmcblk0p6): resizing filesystem from 60156 to 262144 blocks
[ 2.560555] EXT4-fs (mmcblk0p6): resized filesystem to 262144
[ 3.413373] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[ 4.787995] EXT4-fs (mmcblk0p8): mounting ext2 file system using the ext4 subsystem
[ 4.795068] EXT4-fs (mmcblk0p8): mounted filesystem without journal. Opts: (null)
[ 4.878190] EXT4-fs (mmcblk0p8): mounting ext2 file system using the ext4 subsystem
[ 4.884368] EXT4-fs (mmcblk0p8): mounted filesystem without journal. Opts: (null)
[ 5.259418] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.22 (r-20191105-2)(20191120-1)
[ 5.259501] ======== dhd_wlan_init_plat_data ========
[ 5.259522] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[ 5.259537] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: rfkill-wlan driver has not Successful initialized
[ 5.259552] dhd_wlan_init_gpio: unknown oob irqflags !
[ 5.259569] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=-1, oob_irq_flags=0x410
[ 5.259584] dhd_wlan_init_gpio: WL_REG_ON=-1
[ 5.259599] dhd_wifi_platform_load: Enter
[ 5.259615] Power-up adapter ‘DHD generic adapter’
[ 5.259754] wifi_platform_set_power = 1
[ 5.259784] ======== PULL WL_REG_ON(-1) HIGH! ========
[ 5.259801] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 5.259816] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
[ 5.565742] wifi_platform_bus_enumerate device present 1
[ 5.565790] ======== Card detection to detect SDIO card! ========
[ 5.565807] mmc1:mmc host rescan start!
[ 7.732444] failed to power up DHD generic adapter, 1 retry left
[ 7.748802] wifi_platform_set_power = 0
[ 7.748916] ======== PULL WL_REG_ON(-1) LOW! ========
[ 7.748992] [WLAN_RFKILL]: rockchip_wifi_power: 0
[ 7.749034] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
[ 7.749066] wifi_platform_bus_enumerate device present 0
[ 7.749086] ======== Card detection to remove SDIO card! ========
[ 7.749108] mmc1:mmc host rescan start!
[ 7.749250] wifi_platform_set_power = 1
[ 7.749297] ======== PULL WL_REG_ON(-1) HIGH! ========
[ 7.749327] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 7.749354] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
[ 8.055743] wifi_platform_bus_enumerate device present 1
[ 8.055790] ======== Card detection to detect SDIO card! ========
[ 8.055808] mmc1:mmc host rescan start!
[ 10.079089] failed to power up DHD generic adapter, 0 retry left
[ 10.095447] wifi_platform_set_power = 0
[ 10.095549] ======== PULL WL_REG_ON(-1) LOW! ========
[ 10.095570] [WLAN_RFKILL]: rockchip_wifi_power: 0
[ 10.095594] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
[ 10.095619] wifi_platform_bus_enumerate device present 0
[ 10.095634] ======== Card detection to remove SDIO card! ========
[ 10.095658] mmc1:mmc host rescan start!
[ 10.095691] failed to power up DHD generic adapter, max retry reached
[ 10.095713] unregister wifi platform drivers
[ 10.095735] wifi_platform_bus_enumerate device present 0
[ 10.095756] ======== Card detection to remove SDIO card! ========
[ 10.095782] mmc1:mmc host rescan start!
[ 10.095815] ======== dhd_wlan_deinit_plat_data ========
[ 10.095838] dhd_module_init: Failed to load the driver, try cnt 0
[ 10.095924] dhd_module_init: Failed to load driver max retry reached**
[ 10.095959] dhd_module_init: Exit err=-19
[ 10.314735] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 10.316250] rk_gmac-dwmac ffc40000.ethernet: rk_get_eth_addr: mac address: 42:ae:81:26:0a:a4
[ 10.316335] rk_gmac-dwmac ffc40000.ethernet: device MAC address 42:ae:81:26:0a:a4
[ 10.326372] dwmac4: Master AXI performs any burst length
[ 10.326447] rk_gmac-dwmac ffc40000.ethernet eth0: No Safety Features support found
[ 10.326504] rk_gmac-dwmac ffc40000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 10.327413] rk_gmac-dwmac ffc40000.ethernet eth0: registered PTP clock
[ 10.717912] file system registered
[ 10.761228] using random self ethernet address
[ 10.761305] using random host ethernet address
[ 10.944418] read descriptors
[ 10.944498] read strings
[ 11.333299] rk_gmac-dwmac ffc40000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 12.004839] galcore: loading out-of-tree module taints kernel.
[ 12.019007] galcore: npu init.
[ 12.020550] galcore: start npu probe.
[ 12.020819] galcore ffbc0000.npu: Linked as a consumer to regulator.7
[ 12.021283] npu: platform_get_irq irq = 68
[ 12.021323] npu: platform_get_resource registerMemBase = ffbc0000, registerMemSize = 4000
[ 12.021350] Galcore version 6.4.3.5.293908
[ 12.021370] Galcore options:
[ 12.021391] irqLine = 68
[ 12.021410] registerMemBase = 0xFFBC0000
[ 12.021430] registerMemSize = 0x00004000
[ 12.021449] contiguousSize = 0x00400000
[ 12.021469] contiguousBase = 0x0
[ 12.021488] externalSize = 0x00000000
[ 12.021507] externalBase = 0x0
[ 12.021526] exclusiveSize = 0x00000000
[ 12.021546] exclusiveBase = 0x0
[ 12.021565] bankSize = 0x00000000
[ 12.021585] fastClear = -1
[ 12.021604] compression = 15
[ 12.021623] powerManagement = 1
[ 12.021642] baseAddress = 0x00000000
[ 12.021661] physSize = 0x00000000
[ 12.021681] recovery = 1
[ 12.021701] stuckDump = 0
[ 12.021714] gpuProfiler = 1
[ 12.021727] userClusterMask = 0x0
[ 12.021740] GPU smallBatch = 1
[ 12.021758] allMapInOne = 1
[ 12.021777] irqs =
[ 12.021781] 68,
[ 12.021800] -1,
[ 12.021819] -1,
[ 12.021836] -1,
[ 12.021855] -1,
[ 12.021873] -1,
[ 12.021891] -1,
[ 12.021908] -1,
[ 12.021927] -1,
[ 12.021945] -1,
[ 12.021962]
[ 12.021985] registerBases =
[ 12.021989] 0xFFBC0000,
[ 12.022009] 0x00000000,
[ 12.022028] 0x00000000,
[ 12.022046] 0x00000000,
[ 12.022065] 0x00000000,
[ 12.022084] 0x00000000,
[ 12.022102] 0x00000000,
[ 12.022120] 0x00000000,
[ 12.022139] 0x00000000,
[ 12.022207] 0x00000000,
[ 12.022238]
[ 12.022288] registerSizes =
[ 12.022303] 0x00004000,
[ 12.022342] 0x00000000,
[ 12.022370] 0x00000000,
[ 12.022390] 0x00000000,
[ 12.022413] 0x00000000,
[ 12.022438] 0x00000000,
[ 12.022454] 0x00000000,
[ 12.022493] 0x00000000,
[ 12.022518] 0x00000000,
[ 12.022537] 0x00000000,
[ 12.022556]
[ 12.022595] chipIDs =
[ 12.022601] 0xFFFFFFFF,
[ 12.022633] 0xFFFFFFFF,
[ 12.022664] 0xFFFFFFFF,
[ 12.022684] 0xFFFFFFFF,
[ 12.022698] 0xFFFFFFFF,
[ 12.022717] 0xFFFFFFFF,
[ 12.022739] 0xFFFFFFFF,
[ 12.022759] 0xFFFFFFFF,
[ 12.022781] 0xFFFFFFFF,
[ 12.022800] 0xFFFFFFFF,
[ 12.022820]
[ 12.022851] core 0 internal sRAMBases =
[ 12.022855] 0xFFFFFFFFFFFFFFFF,
[ 12.022876] 0xFFFFFFFFFFFFFFFF,
[ 12.022896]
[ 12.022925] core 1 internal sRAMBases =
[ 12.022930] 0xFFFFFFFFFFFFFFFF,
[ 12.022944] 0xFFFFFFFFFFFFFFFF,
[ 12.022962]
[ 12.023000] core 2 internal sRAMBases =
[ 12.023006] 0xFFFFFFFFFFFFFFFF,
[ 12.023026] 0xFFFFFFFFFFFFFFFF,
[ 12.023046]
[ 12.023081] core 3 internal sRAMBases =
[ 12.023086] 0xFFFFFFFFFFFFFFFF,
[ 12.023106] 0xFFFFFFFFFFFFFFFF,
[ 12.023125]
[ 12.023162] core 4 internal sRAMBases =
[ 12.023166] 0xFFFFFFFFFFFFFFFF,
[ 12.023180] 0xFFFFFFFFFFFFFFFF,
[ 12.023201]
[ 12.023230] core 5 internal sRAMBases =
[ 12.023233] 0xFFFFFFFFFFFFFFFF,
[ 12.023253] 0xFFFFFFFFFFFFFFFF,
[ 12.023273]
[ 12.023310] core 6 internal sRAMBases =
[ 12.023314] 0xFFFFFFFFFFFFFFFF,
[ 12.023334] 0xFFFFFFFFFFFFFFFF,
[ 12.023369]
[ 12.023422] core 7 internal sRAMBases =
[ 12.023430] 0xFFFFFFFFFFFFFFFF,
[ 12.023462] 0xFFFFFFFFFFFFFFFF,
[ 12.023497]
[ 12.023568] core 8 internal sRAMBases =
[ 12.023578] 0xFFFFFFFFFFFFFFFF,
[ 12.023600] 0xFFFFFFFFFFFFFFFF,
[ 12.023619]
[ 12.023649] core 9 internal sRAMBases =
[ 12.023653] 0xFFFFFFFFFFFFFFFF,
[ 12.023668] 0xFFFFFFFFFFFFFFFF,
[ 12.023701]
[ 12.023738] External sRAMBases =
[ 12.023743] 0xffffffffffffffff,
[ 12.023767] 0xffffffffffffffff,
[ 12.023785]
[ 12.023816] mmuPageTablePool = 1
[ 12.023841] mmuDynamicMap = 1
[ 12.023871] isrPoll = 0x00000000
[ 12.023894] Build options:
[ 12.023909] gcdGPU_TIMEOUT = 20000
[ 12.023936] gcdGPU_2D_TIMEOUT = 4000
[ 12.023958] gcdINTERRUPT_STATISTIC = 1
[ 12.031713] Galcore Info: ContiguousBase=0x7f85a000 ContiguousSize=0x400000
[ 12.037561] Galcore Info: MMU mapped core 0 SRAM[0] hardware virtual address=0x400000 size=0x40000
[ 12.037619] Galcore Info: MMU mapped core 0 SRAM[1] hardware virtual address=0x440000 size=0x40000
[ 12.039868] NN flop resetting…
[ 12.045648] galcore ffbc0000.npu: Init npu devfreq
[ 12.045723] galcore ffbc0000.npu: bin=0
[ 12.045814] galcore ffbc0000.npu: leakage=1.375
[ 12.058220] galcore ffbc0000.npu: temp=56300, pvtm=107634 (107634 + 0)
[ 12.058552] galcore ffbc0000.npu: pvtm-volt-sel=1
[ 12.058626] galcore ffbc0000.npu: bin-scale=23
[ 12.059886] galcore ffbc0000.npu: avs=0
[ 12.060514] galcore ffbc0000.npu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
[ 12.060570] galcore ffbc0000.npu: failed to read out thermal zone (-22)
[ 12.060715] galcore ffbc0000.npu: failed to find power_model node
[ 12.060739] galcore ffbc0000.npu: failed to initialize power model
[ 12.182637] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 12.198577] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 12.214345] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 12.222624] android_work: sent uevent USB_STATE=CONNECTED
[ 12.225657] configfs-gadget gadget: high-speed config #1: b
[ 12.226473] android_work: sent uevent USB_STATE=CONFIGURED
[ 18.424504] EXT4-fs (mmcblk0p9): mounting ext2 file system using the ext4 subsystem
[ 18.429774] EXT4-fs (mmcblk0p9): mounted filesystem without journal. Opts: (null)
[ 23.022855] adbd (805): /proc/805/oom_adj is deprecated, please use /proc/805/oom_score_adj instead.
[ 32.052333] vcc_sd: disabling
[root@RV1126_RV1109:~]# clear
[root@RV1126_RV1109:~]# dmesg | grep -i cif
[ 0.435371] rkcifhw ffae0000.rkcif: no iommu attached, using non-iommu buffers
[ 0.435423] rkcifhw ffae0000.rkcif: assigned reserved memory node isp
[ 0.435618] rkcif rkcif_dvp: rkcif driver version: v00.01.09
[ 0.435735] rkcif rkcif_dvp: attach to cif hw node
[ 0.435758] rkcif rkcif_dvp: no iommu attached, using non-iommu buffers
[ 0.435789] rkcif rkcif_dvp: assigned reserved memory node isp
[ 0.436290] rkcif_dvp: Failed to register subdev notifier(-19)
[ 0.436743] rkcif rkcif_dvp: detach to cif hw node
[ 0.436860] rkcif rkcif_mipi_lvds: rkcif driver version: v00.01.09
[ 0.436972] rkcif rkcif_mipi_lvds: attach to cif hw node
[ 0.436993] rkcif rkcif_mipi_lvds: no iommu attached, using non-iommu buffers
[ 0.437033] rkcif rkcif_mipi_lvds: assigned reserved memory node isp
[ 0.438063] rkcif rkcif_mipi_lvds: Entity type for entity rockchip-mipi-csi2 was not initialized!
[ 0.441467] rkisp rkisp-vir0: No memory-region-thunderboot specified
[ 0.444760] rkisp rkisp-vir1: No memory-region-thunderboot specified
[ 0.757586] rkcif rkcif_mipi_lvds: clear unready subdev num: 1
[ 0.758170] rkcif_mipi_lvds: Async subdev notifier completed
[ 1.141135] udevd[118]: specified group ‘kvm’ unknown
[ 1.422397] stream_cif_mipi_id0: update sensor info failed -19
[ 1.428501] stream_cif_mipi_id1: update sensor info failed -19
[ 1.432804] stream_cif_mipi_id3: update sensor info failed -19
[ 1.445559] stream_cif_mipi_id2: update sensor info failed -19
[root@RV1126_RV1109:~]# clear
[root@RV1126_RV1109:~]# dmesg
[ 0.000000] Booting Linux on physical CPU 0xf00
[ 0.000000] Linux version 4.19.111 (hfx@hfx-RESCUER-R720-15IKBN) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05)) #1 SMP PREEMPT Mon Aug 9 20:09:53 CST 2021
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Rockchip RV1126 38x38 V10 EMMC DDR3 Board
[ 0.000000] earlycon: uart8250 at MMIO32 0xff570000 (options ‘’)
[ 0.000000] bootconsole [uart8250] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created CMA memory pool at 0x7f800000, size 8 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x78000000, size 92 MiB
[ 0.000000] OF: reserved mem: initialized node isp, compatible id shared-dma-pool
[ 0.000000] On node 0 totalpages: 523704
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 261560 pages, LIFO batch:63
[ 0.000000] HighMem zone: 262144 pages, LIFO batch:63
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 15 pages/cpu s32140 r8192 d21108 u61440
[ 0.000000] pcpu-alloc: s32140 r8192 d21108 u61440 alloc=154096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 521656
[ 0.000000] Kernel command line: user_debug=31 storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal rootwait earlycon=uart8250,mmio32,0xff570000 console=ttyFIQ0 root=PARTUUID=614e0000-0000 rootfstype=ext4 snd_aloop.index=7
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1959400K/2094816K available (8192K kernel code, 331K rwdata, 1900K rodata, 1024K init, 895K bss, 33016K reserved, 102400K cma-reserved, 945440K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xb0000000 - 0xf0000000 (1024 MB)
[ 0.000000] pkmap : 0xafe00000 - 0xb0000000 ( 2 MB)
[ 0.000000] modules : 0xaf000000 - 0xafe00000 ( 14 MB)
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (9184 kB)
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 332 kB)
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 896 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: random: get_random_bytes called from start_kernel+0x324/0x4a4 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000752] Switching to timer-based delay loop, resolution 41ns
[ 0.002537] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 0.003492] pid_max: default: 4096 minimum: 301
[ 0.004101] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004725] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.006067] CPU: Testing write buffer coherency: ok
[ 0.006885] /cpus/cpu@f00 missing clock-frequency property
[ 0.007411] /cpus/cpu@f01 missing clock-frequency property
[ 0.007930] /cpus/cpu@f02 missing clock-frequency property
[ 0.008450] /cpus/cpu@f03 missing clock-frequency property
[ 0.008963] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[ 0.010240] Setting up static identity map for 0x100000 - 0x100060
[ 0.010980] rcu: Hierarchical SRCU implementation.
[ 0.012058] smp: Bringing up secondary CPUs …
[ 0.013414] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[ 0.014419] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[ 0.015360] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[ 0.015492] smp: Brought up 1 node, 4 CPUs
[ 0.017535] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 0.018114] CPU: All CPU(s) started in SVC mode.
[ 0.019553] devtmpfs: initialized
[ 0.045992] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.047367] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.048276] futex hash table entries: 16 (order: -2, 1024 bytes)
[ 0.048966] pinctrl core: initialized pinctrl subsystem
[ 0.050703] NET: Registered protocol family 16
[ 0.051771] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.054474] cpuidle: using governor menu
[ 0.054875] Registered FIQ tty driver
[ 0.055754] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.056494] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.059395] console [pstore-1] enabled
[ 0.060003] pstore: Registered ramoops as persistent store backend
[ 0.060641] ramoops: attached 0x100000@0x8000000, ecc: 0/0
[ 0.089514] gpio gpiochip0: (gpio0): added GPIO chardev (254:0)
[ 0.089648] gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (gpio0)
[ 0.089863] gpio gpiochip1: (gpio1): added GPIO chardev (254:1)
[ 0.089981] gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (gpio1)
[ 0.090188] gpio gpiochip2: (gpio2): added GPIO chardev (254:2)
[ 0.090303] gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (gpio2)
[ 0.090495] gpio gpiochip3: (gpio3): added GPIO chardev (254:3)
[ 0.090617] gpiochip_setup_dev: registered GPIOs 96 to 127 on device: gpiochip3 (gpio3)
[ 0.090859] gpio gpiochip4: (gpio4): added GPIO chardev (254:4)
[ 0.090981] gpiochip_setup_dev: registered GPIOs 128 to 129 on device: gpiochip4 (gpio4)
[ 0.108621] cryptd: max_cpu_qlen set to 1000
[ 0.109907] fiq debugger fiq mode enabled
[ 0.110678] console [ttyFIQ0] enabled
[ 0.111359] bootconsole [uart8250] disabled
[ 0.112039] Registered fiq debugger ttyFIQ0
[ 0.112727] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[ 0.113903] of_get_named_gpiod_flags: can’t parse ‘gpio’ property of node ‘/vccsys[0]’
[ 0.114357] of_get_named_gpiod_flags: can’t parse ‘gpio’ property of node ‘/vcc-1v8[0]’
[ 0.114773] of_get_named_gpiod_flags: can’t parse ‘gpio’ property of node ‘/vcc-dvdd[0]’
[ 0.115191] of_get_named_gpiod_flags: can’t parse ‘gpio’ property of node ‘/vcc33sys[0]’
[ 0.115714] of_get_named_gpiod_flags: parsed ‘gpio’ property of node ‘/vcc-sd[0]’ - status (0)
[ 0.115819] vcc_sd: supplied by vcc3v3_sys
[ 0.116305] of_get_named_gpiod_flags: can’t parse ‘gpio’ property of node ‘/vdd-logic-npu-vepu-fixed[0]’
[ 0.117283] rk_iommu ffb00f00.iommu: version = 1
[ 0.117984] rk_iommu ffb20800.iommu: version = 1
[ 0.118456] rk_iommu ffb60e00.iommu: version = 1
[ 0.119001] rk_iommu ffb80480.iommu: version = 1
[ 0.119469] rk_iommu ffb90800.iommu: version = 1
[ 0.119879] rk_iommu ffbb0f00.iommu: version = 1
[ 0.120829] SCSI subsystem initialized
[ 0.121144] usbcore: registered new interface driver usbfs
[ 0.121241] usbcore: registered new interface driver hub
[ 0.121379] usbcore: registered new device driver usb
[ 0.121488] media: Linux media interface: v0.10
[ 0.121565] videodev: Linux video capture interface: v2.00
[ 0.121643] pps_core: LinuxPPS API ver. 1 registered
[ 0.121668] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.121712] PTP clock support registered
[ 0.123118] Advanced Linux Sound Architecture Driver Initialized.
[ 0.123807] Bluetooth: Core ver 2.22
[ 0.123892] NET: Registered protocol family 31
[ 0.123918] Bluetooth: HCI device and connection manager initialized
[ 0.123949] Bluetooth: HCI socket layer initialized
[ 0.123978] Bluetooth: L2CAP socket layer initialized
[ 0.124037] Bluetooth: SCO socket layer initialized
[ 0.124543] rockchip-cpuinfo cpuinfo: SoC : 11260000
[ 0.124579] rockchip-cpuinfo cpuinfo: Serial : 584db0d9e7039c9b
[ 0.125507] clocksource: Switched to clocksource arch_sys_counter
[ 0.128047] NET: Registered protocol family 2
[ 0.129077] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.129131] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.129299] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.129506] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.129667] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.129743] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.129987] NET: Registered protocol family 1
[ 0.131745] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 0.134437] Initialise system trusted keyrings
[ 0.134694] workingset: timestamp_bits=29 max_order=19 bucket_order=0
[ 0.142236] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.145031] Key type asymmetric registered
[ 0.145064] Asymmetric key parser ‘x509’ registered
[ 0.145139] bounce: pool size: 64 pages
[ 0.145214] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.145245] io scheduler noop registered
[ 0.145268] io scheduler deadline registered
[ 0.145435] io scheduler cfq registered (default)
[ 0.145464] io scheduler mq-deadline registered
[ 0.145521] io scheduler kyber registered
[ 0.145690] io scheduler bfq registered
[ 0.149015] rockchip-usb2phy-naneng ff4c0000.usb2-phy: GPIO lookup for consumer vup
[ 0.149027] rockchip-usb2phy-naneng ff4c0000.usb2-phy: using device tree for GPIO lookup
[ 0.149067] of_get_named_gpiod_flags: parsed ‘vup-gpios’ property of node ‘/usb2-phy@ff4c0000[0]’ - status (0)
[ 0.149097] gpio gpiochip0: Persistence not supported for GPIO 17
[ 0.149985] phy phy-ff4c0000.usb2-phy.1: Failed to get VBUS supply regulator
[ 0.151640] rockchip-usb2phy-naneng ff4c8000.usb2-phy: GPIO lookup for consumer vup
[ 0.151653] rockchip-usb2phy-naneng ff4c8000.usb2-phy: using device tree for GPIO lookup
[ 0.151678] of_get_named_gpiod_flags: can’t parse ‘vup-gpios’ property of node ‘/usb2-phy@ff4c8000[0]’
[ 0.151699] of_get_named_gpiod_flags: can’t parse ‘vup-gpio’ property of node ‘/usb2-phy@ff4c8000[0]’
[ 0.151711] rockchip-usb2phy-naneng ff4c8000.usb2-phy: using lookup tables for GPIO lookup
[ 0.151722] rockchip-usb2phy-naneng ff4c8000.usb2-phy: No GPIO consumer vup found
[ 0.155327] mpp_service mpp-srv: 4cdfd25 author: Yandong Lin 2021-02-21 video: rockchip: mpp: Fix irq state err.
[ 0.155374] mpp_service mpp-srv: probe start
[ 0.156406] iommu: Adding device ffb80000.rkvdec to group 3
[ 0.156468] mpp_rkvdec ffb80000.rkvdec: Linked as a consumer to ffb80480.iommu
[ 0.156673] mpp_rkvdec ffb80000.rkvdec: probing start
[ 0.157300] mpp_rkvdec ffb80000.rkvdec: shared_niu_a is not found!
[ 0.157336] rkvdec_init:1182: No niu aclk reset resource define
[ 0.157361] mpp_rkvdec ffb80000.rkvdec: shared_niu_h is not found!
[ 0.157385] rkvdec_init:1185: No niu hclk reset resource define
[ 0.157722] mpp_rkvdec ffb80000.rkvdec: probing finish
[ 0.158420] iommu: Adding device ffbb0000.rkvenc to group 5
[ 0.158476] mpp_rkvenc ffbb0000.rkvenc: Linked as a consumer to ffbb0f00.iommu
[ 0.158772] mpp_rkvenc ffbb0000.rkvenc: probing start
[ 0.159483] mpp_rkvenc ffbb0000.rkvenc: Linked as a consumer to regulator.6
[ 0.159558] mpp_rkvenc ffbb0000.rkvenc: bin=0
[ 0.159616] mpp_rkvenc ffbb0000.rkvenc: leakage=1.750
[ 0.159700] mpp_rkvenc ffbb0000.rkvenc: Failed to get pvtm
[ 0.159751] mpp_rkvenc ffbb0000.rkvenc: bin-scale=37
[ 0.160325] mpp_rkvenc ffbb0000.rkvenc: avs=0
[ 0.160806] mpp_rkvenc ffbb0000.rkvenc: failed to find power_model node
[ 0.160835] mpp_rkvenc ffbb0000.rkvenc: failed to initialize power model
[ 0.161455] mpp_rkvenc ffbb0000.rkvenc: probing finish
[ 0.162124] iommu: Adding device ffb90400.vdpu to group 4
[ 0.162234] mpp_vdpu2 ffb90400.vdpu: Linked as a consumer to ffb90800.iommu
[ 0.162364] mpp_vdpu2 ffb90400.vdpu: probe device
[ 0.162910] mpp_vdpu2 ffb90400.vdpu: reset_group->rw_sem_on=0
[ 0.162961] mpp_vdpu2 ffb90400.vdpu: reset_group->rw_sem_on=0
[ 0.163192] mpp_vdpu2 ffb90400.vdpu: probing finish
[ 0.163839] iommu: Adding device ffb90000.vepu to group 4
[ 0.163896] mpp_vepu2 ffb90000.vepu: Linked as a consumer to ffb90800.iommu
[ 0.164020] mpp_vepu2 ffb90000.vepu: probe device
[ 0.164516] mpp_vepu2 ffb90000.vepu: reset_group->rw_sem_on=0
[ 0.164561] mpp_vepu2 ffb90000.vepu: reset_group->rw_sem_on=0
[ 0.164806] mpp_vepu2 ffb90000.vepu: probing finish
[ 0.165335] iommu: Adding device ffb20000.iep to group 1
[ 0.165393] mpp-iep2 ffb20000.iep: Linked as a consumer to ffb20800.iommu
[ 0.165570] mpp-iep2 ffb20000.iep: probe device
[ 0.166277] mpp-iep2 ffb20000.iep: allocate roi buffer failed
[ 0.166487] mpp-iep2 ffb20000.iep: probing finish
[ 0.166753] mpp_service mpp-srv: probe success
[ 0.172054] dma-pl330 ff4e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.172097] dma-pl330 ff4e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 0.174547] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[ 0.175120] pwm-regulator vdd-npu: GPIO lookup for consumer enable
[ 0.175131] pwm-regulator vdd-npu: using device tree for GPIO lookup
[ 0.175168] of_get_named_gpiod_flags: can’t parse ‘enable-gpios’ property of node ‘/vdd-npu[0]’
[ 0.175190] of_get_named_gpiod_flags: can’t parse ‘enable-gpio’ property of node ‘/vdd-npu[0]’
[ 0.175203] pwm-regulator vdd-npu: using lookup tables for GPIO lookup
[ 0.175214] pwm-regulator vdd-npu: No GPIO consumer enable found
[ 0.175249] pwm-regulator: supplied by vcc5v0_sys
[ 0.175912] pwm-regulator vdd-arm: Failed to get PWM: -16
[ 0.175963] pwm-regulator: probe of vdd-arm failed with error -16
[ 0.176092] pwm-regulator vdd-logic-npu-vepu: GPIO lookup for consumer enable
[ 0.176103] pwm-regulator vdd-logic-npu-vepu: using device tree for GPIO lookup
[ 0.176125] of_get_named_gpiod_flags: can’t parse ‘enable-gpios’ property of node ‘/vdd-logic-npu-vepu[0]’
[ 0.176145] of_get_named_gpiod_flags: can’t parse ‘enable-gpio’ property of node ‘/vdd-logic-npu-vepu[0]’
[ 0.176156] pwm-regulator vdd-logic-npu-vepu: using lookup tables for GPIO lookup
[ 0.176167] pwm-regulator vdd-logic-npu-vepu: No GPIO consumer enable found
[ 0.176195] pwm-regulator: supplied by vcc3v3_sys
[ 0.177049] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 0.177960] ff560000.serial: ttyS0 at MMIO 0xff560000 (irq = 34, base_baud = 1500000) is a 16550A
[ 0.180668] random: fast init done
[ 0.181188] random: crng init done
[ 0.181299] iommu: Adding device ffb00000.vop to group 0
[ 0.181358] rockchip-vop ffb00000.vop: Linked as a consumer to ffb00f00.iommu
[ 0.185641] rockchip-drm display-subsystem: Linked as a consumer to ffb00000.vop
[ 0.186770] rockchip-drm display-subsystem: Linked as a consumer to ffb30000.dsi
[ 0.188149] rockchip-drm display-subsystem: devfreq is not set
[ 0.188620] rockchip-drm display-subsystem: bound ffb00000.vop (ops 0xb093bd80)
[ 0.188696] dw-mipi-dsi ffb30000.dsi: [drm:dw_mipi_dsi_bind] ERROR Failed to find panel or bridge: -517
[ 0.188735] rockchip-drm display-subsystem: failed to bind ffb30000.dsi (ops 0xb09424ac): -517
[ 0.189054] rockchip-drm display-subsystem: master bind failed: -517
[ 0.194312] panel-simple-dsi ffb30000.dsi.0: ffb30000.dsi.0 supply power not found, using dummy regulator
[ 0.194429] panel-simple-dsi ffb30000.dsi.0: Linked as a consumer to regulator.0
[ 0.194482] panel-simple-dsi ffb30000.dsi.0: ffb30000.dsi.0 supply vsp not found, using dummy regulator
[ 0.194597] panel-simple-dsi ffb30000.dsi.0: ffb30000.dsi.0 supply vsn not found, using dummy regulator
[ 0.194676] panel-simple-dsi ffb30000.dsi.0: GPIO lookup for consumer enable
[ 0.194686] panel-simple-dsi ffb30000.dsi.0: using device tree for GPIO lookup
[ 0.194715] of_get_named_gpiod_flags: can’t parse ‘enable-gpios’ property of node ‘/dsi@ffb30000/panel@0[0]’
[ 0.194737] of_get_named_gpiod_flags: can’t parse ‘enable-gpio’ property of node ‘/dsi@ffb30000/panel@0[0]’
[ 0.194750] panel-simple-dsi ffb30000.dsi.0: using lookup tables for GPIO lookup
[ 0.194760] panel-simple-dsi ffb30000.dsi.0: No GPIO consumer enable found
[ 0.194772] panel-simple-dsi ffb30000.dsi.0: GPIO lookup for consumer reset
[ 0.194781] panel-simple-dsi ffb30000.dsi.0: using device tree for GPIO lookup
[ 0.194803] of_get_named_gpiod_flags: can’t parse ‘reset-gpios’ property of node ‘/dsi@ffb30000/panel@0[0]’
[ 0.194824] of_get_named_gpiod_flags: can’t parse ‘reset-gpio’ property of node ‘/dsi@ffb30000/panel@0[0]’
[ 0.194835] panel-simple-dsi ffb30000.dsi.0: using lookup tables for GPIO lookup
[ 0.194845] panel-simple-dsi ffb30000.dsi.0: No GPIO consumer reset found
[ 0.195905] zram: Added device: zram0
[ 0.197911] mdio_bus fixed-0: GPIO lookup for consumer reset
[ 0.197923] mdio_bus fixed-0: using lookup tables for GPIO lookup
[ 0.197933] mdio_bus fixed-0: No GPIO consumer reset found
[ 0.197971] libphy: Fixed MDIO Bus: probed
[ 0.199966] rk_gmac-dwmac ffc40000.ethernet: no regulator found
[ 0.200013] rk_gmac-dwmac ffc40000.ethernet: clock input or output? (input).
[ 0.200036] rk_gmac-dwmac ffc40000.ethernet: TX delay(0x2a).
[ 0.200065] rk_gmac-dwmac ffc40000.ethernet: RX delay(0x1a).
[ 0.200096] rk_gmac-dwmac ffc40000.ethernet: integrated PHY? (no).
[ 0.200185] rk_gmac-dwmac ffc40000.ethernet: clock input from PHY
[ 0.205233] rk_gmac-dwmac ffc40000.ethernet: init for RGMII
[ 0.205560] rk_gmac-dwmac ffc40000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[ 0.205596] rk_gmac-dwmac ffc40000.ethernet: DWMAC4/5
[ 0.205626] rk_gmac-dwmac ffc40000.ethernet: DMA HW capability register supported
[ 0.205654] rk_gmac-dwmac ffc40000.ethernet: RX Checksum Offload Engine supported
[ 0.205680] rk_gmac-dwmac ffc40000.ethernet: TX Checksum insertion supported
[ 0.205705] rk_gmac-dwmac ffc40000.ethernet: Wake-Up On Lan supported
[ 0.205782] rk_gmac-dwmac ffc40000.ethernet: TSO supported
[ 0.205804] rk_gmac-dwmac ffc40000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 0.205835] rk_gmac-dwmac ffc40000.ethernet: TSO feature enabled
[ 0.206012] mdio_bus stmmac-0: GPIO lookup for consumer reset
[ 0.206021] mdio_bus stmmac-0: using device tree for GPIO lookup
[ 0.206047] of_get_named_gpiod_flags: can’t parse ‘reset-gpios’ property of node ‘/ethernet@ffc40000/mdio[0]’
[ 0.206066] of_get_named_gpiod_flags: can’t parse ‘reset-gpio’ property of node ‘/ethernet@ffc40000/mdio[0]’
[ 0.206078] mdio_bus stmmac-0: using lookup tables for GPIO lookup
[ 0.206089] mdio_bus stmmac-0: No GPIO consumer reset found
[ 0.206125] of_get_named_gpiod_flags: parsed ‘snps,reset-gpio’ property of node ‘/ethernet@ffc40000[0]’ - status (0)
[ 0.338887] libphy: stmmac: probed
[ 0.339567] of_get_named_gpiod_flags: can’t parse ‘reset-gpios’ property of node ‘/ethernet@ffc40000/mdio/phy@0[0]’
[ 0.342496] dwc3 ffd00000.dwc3: Failed to get clk ‘ref’: -2
[ 0.348039] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 0.348079] ehci-platform: EHCI generic platform driver
[ 0.351694] ehci-platform ffe00000.usb: EHCI Host Controller
[ 0.351761] ehci-platform ffe00000.usb: new USB bus registered, assigned bus number 1
[ 0.351966] ehci-platform ffe00000.usb: irq 69, io mem 0xffe00000
[ 0.362232] ehci-platform ffe00000.usb: USB 2.0 started, EHCI 1.00
[ 0.362546] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.362580] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.362607] usb usb1: Product: EHCI Host Controller
[ 0.362636] usb usb1: Manufacturer: Linux 4.19.111 ehci_hcd
[ 0.362662] usb usb1: SerialNumber: ffe00000.usb
[ 0.363465] hub 1-0:1.0: USB hub found
[ 0.363542] hub 1-0:1.0: 1 port detected
[ 0.364291] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 0.364360] ohci-platform: OHCI generic platform driver
[ 0.364915] ohci-platform ffe10000.usb: Generic Platform OHCI controller
[ 0.364979] ohci-platform ffe10000.usb: new USB bus registered, assigned bus number 2
[ 0.365176] ohci-platform ffe10000.usb: irq 70, io mem 0xffe10000
[ 0.423140] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 0.423175] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.423197] usb usb2: Product: Generic Platform OHCI controller
[ 0.423245] usb usb2: Manufacturer: Linux 4.19.111 ohci_hcd
[ 0.423270] usb usb2: SerialNumber: ffe10000.usb
[ 0.424013] hub 2-0:1.0: USB hub found
[ 0.424097] hub 2-0:1.0: 1 port detected
[ 0.425863] usbcore: registered new interface driver usb-storage
[ 0.426669] i2c /dev entries driver
[ 0.432499] ircut cam_ircut: driver version: 00.01.00
[ 0.432771] ircut cam_ircut: failed get pulse-width,use dafult value 100
[ 0.432801] ircut cam_ircut: GPIO lookup for consumer ircut-open
[ 0.432810] ircut cam_ircut: using device tree for GPIO lookup
[ 0.432869] of_get_named_gpiod_flags: parsed ‘ircut-open-gpios’ property of node ‘/cam_ircut[0]’ - status (0)
[ 0.432896] gpio gpiochip2: Persistence not supported for GPIO 7
[ 0.432924] ircut cam_ircut: GPIO lookup for consumer ircut-close
[ 0.432933] ircut cam_ircut: using device tree for GPIO lookup
[ 0.432966] of_get_named_gpiod_flags: parsed ‘ircut-close-gpios’ property of node ‘/cam_ircut[0]’ - status (0)
[ 0.432985] gpio gpiochip2: Persistence not supported for GPIO 6
[ 0.433006] ircut cam_ircut: GPIO lookup for consumer led
[ 0.433015] ircut cam_ircut: using device tree for GPIO lookup
[ 0.433036] of_get_named_gpiod_flags: can’t parse ‘led-gpios’ property of node ‘/cam_ircut[0]’
[ 0.433055] of_get_named_gpiod_flags: can’t parse ‘led-gpio’ property of node ‘/cam_ircut[0]’
[ 0.433067] ircut cam_ircut: using lookup tables for GPIO lookup
[ 0.433078] ircut cam_ircut: No GPIO consumer led found
[ 0.433107] ircut cam_ircut: probe successful!
[ 0.433702] ERROR: could not get clock /mipi-csi2@ffb10000:srst_csihost_p(1)
[ 0.433736] rockchip-mipi-csi2: failed to get rst clock, maybe useless
[ 0.433984] rockchip-mipi-csi2: probe success, v4l2_dev:(null)!
[ 0.435371] rkcifhw ffae0000.rkcif: no iommu attached, using non-iommu buffers
[ 0.435423] rkcifhw ffae0000.rkcif: assigned reserved memory node isp
[ 0.435618] rkcif rkcif_dvp: rkcif driver version: v00.01.09
[ 0.435735] rkcif rkcif_dvp: attach to cif hw node
[ 0.435758] rkcif rkcif_dvp: no iommu attached, using non-iommu buffers
[ 0.435789] rkcif rkcif_dvp: assigned reserved memory node isp
[ 0.436290] rkcif_dvp: Failed to register subdev notifier(-19)
[ 0.436743] rkcif rkcif_dvp: detach to cif hw node
[ 0.436860] rkcif rkcif_mipi_lvds: rkcif driver version: v00.01.09
[ 0.436972] rkcif rkcif_mipi_lvds: attach to cif hw node
[ 0.436993] rkcif rkcif_mipi_lvds: no iommu attached, using non-iommu buffers
[ 0.437033] rkcif rkcif_mipi_lvds: assigned reserved memory node isp
[ 0.438063] rkcif rkcif_mipi_lvds: Entity type for entity rockchip-mipi-csi2 was not initialized!
[ 0.440460] rkisp_hw ffb50000.rkisp: is_thunderboot: 0
[ 0.440502] rkisp_hw ffb50000.rkisp: Missing rockchip,grf property
[ 0.440855] rkisp_hw ffb50000.rkisp: iommu is disabled, using non-iommu buffers
[ 0.440903] rkisp_hw ffb50000.rkisp: assigned reserved memory node isp
[ 0.441221] rkisp rkisp-vir0: rkisp driver version: v01.04.01
[ 0.441326] rkisp rkisp-vir0: GPIO lookup for consumer vsirq
[ 0.441336] rkisp rkisp-vir0: using device tree for GPIO lookup
[ 0.441363] of_get_named_gpiod_flags: can’t parse ‘vsirq-gpios’ property of node ‘/rkisp-vir0[0]’
[ 0.441385] of_get_named_gpiod_flags: can’t parse ‘vsirq-gpio’ property of node ‘/rkisp-vir0[0]’
[ 0.441397] rkisp rkisp-vir0: using lookup tables for GPIO lookup
[ 0.441407] rkisp rkisp-vir0: No GPIO consumer vsirq found
[ 0.441467] rkisp rkisp-vir0: No memory-region-thunderboot specified
[ 0.441713] rkisp rkisp-vir0: Entity type for entity rkisp-isp-subdev was not initialized!
[ 0.441766] rkisp rkisp-vir0: Entity type for entity rkisp-csi-subdev was not initialized!
[ 0.441801] rkisp rkisp-vir0: Entity type for entity rkisp-bridge-ispp was not initialized!
[ 0.444507] rkisp rkisp-vir1: rkisp driver version: v01.04.01
[ 0.444614] rkisp rkisp-vir1: GPIO lookup for consumer vsirq
[ 0.444624] rkisp rkisp-vir1: using device tree for GPIO lookup
[ 0.444648] of_get_named_gpiod_flags: can’t parse ‘vsirq-gpios’ property of node ‘/rkisp-vir1[0]’
[ 0.444668] of_get_named_gpiod_flags: can’t parse ‘vsirq-gpio’ property of node ‘/rkisp-vir1[0]’
[ 0.444680] rkisp rkisp-vir1: using lookup tables for GPIO lookup
[ 0.444690] rkisp rkisp-vir1: No GPIO consumer vsirq found
[ 0.444760] rkisp rkisp-vir1: No memory-region-thunderboot specified
[ 0.444978] rkisp rkisp-vir1: Entity type for entity rkisp-isp-subdev was not initialized!
[ 0.445024] rkisp rkisp-vir1: Entity type for entity rkisp-csi-subdev was not initialized!
[ 0.445057] rkisp rkisp-vir1: Entity type for entity rkisp-bridge-ispp was not initialized!
[ 0.448548] iommu: Adding device ffb60000.rkispp to group 2
[ 0.448613] rkispp_hw ffb60000.rkispp: Linked as a consumer to ffb60e00.iommu
[ 0.449285] rkispp_hw ffb60000.rkispp: max input:1920x1080@30fps
[ 0.449335] rkispp_hw ffb60000.rkispp: can’t request region for resource [mem 0xffb60000-0xffb7ffff]
[ 0.449855] rkispp rkispp-vir0: rkispp driver version: v01.04.01
[ 0.452151] rkispp rkispp-vir1: rkispp driver version: v01.04.01
[ 0.455149] rockchip-iodomain fe020000.syscon:io-domains: Linked as a consumer to regulator.4
[ 0.455272] rockchip-iodomain fe020000.syscon:io-domains: Linked as a consumer to regulator.2
[ 0.458556] rockchip-thermal ff5f0000.tsadc: tsadc trimmed value = -10
[ 0.458977] rockchip-thermal ff5f0000.tsadc: tsadc is probed successfully!
[ 0.459466] rockchip-thermal ff5f8000.tsadc: tsadc trimmed value = -11
[ 0.459732] rockchip-thermal ff5f8000.tsadc: tsadc is probed successfully!
[ 0.460662] Bluetooth: HCI UART driver ver 2.3
[ 0.460696] Bluetooth: HCI UART protocol H4 registered
[ 0.461033] cpu cpu0: bin=0
[ 0.461088] cpu cpu0: leakage=2.0
[ 0.461146] cpu cpu0: Failed to get reg
[ 0.461185] cpu cpu0: bin-scale=5
[ 0.461534] cpuidle: enable-method property ‘psci’ found operations
[ 0.461709] cpuidle: enable-method property ‘psci’ found operations
[ 0.461895] cpuidle: enable-method property ‘psci’ found operations
[ 0.462075] cpuidle: enable-method property ‘psci’ found operations
[ 0.462656] pwrseq_simple sdio-pwrseq: GPIO lookup for consumer reset
[ 0.462668] pwrseq_simple sdio-pwrseq: using device tree for GPIO lookup
[ 0.462707] of_get_named_gpiod_flags: parsed ‘reset-gpios’ property of node ‘/sdio-pwrseq[0]’ - status (0)
[ 0.462733] gpio gpiochip0: Persistence not supported for GPIO 6
[ 0.463178] Synopsys Designware Multimedia Card Interface Driver
[ 0.464144] dwmmc_rockchip ffc50000.dwmmc: IDMAC supports 32-bit address mode.
[ 0.464227] dwmmc_rockchip ffc50000.dwmmc: Using internal DMA controller.
[ 0.464256] dwmmc_rockchip ffc50000.dwmmc: Version ID is 270a
[ 0.464353] dwmmc_rockchip ffc50000.dwmmc: DW MMC controller at irq 64,32 bit host data width,256 deep fifo
[ 0.464437] dwmmc_rockchip ffc50000.dwmmc: GPIO lookup for consumer wp
[ 0.464447] dwmmc_rockchip ffc50000.dwmmc: using device tree for GPIO lookup
[ 0.464471] of_get_named_gpiod_flags: can’t parse ‘wp-gpios’ property of node ‘/dwmmc@ffc50000[0]’
[ 0.464492] of_get_named_gpiod_flags: can’t parse ‘wp-gpio’ property of node ‘/dwmmc@ffc50000[0]’
[ 0.464505] dwmmc_rockchip ffc50000.dwmmc: using lookup tables for GPIO lookup
[ 0.464515] dwmmc_rockchip ffc50000.dwmmc: No GPIO consumer wp found
[ 0.464572] mmc_host mmc0: card is non-removable.
[ 0.477586] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.491407] dwmmc_rockchip ffc60000.dwmmc: IDMAC supports 32-bit address mode.
[ 0.491535] dwmmc_rockchip ffc60000.dwmmc: Using internal DMA controller.
[ 0.491567] dwmmc_rockchip ffc60000.dwmmc: Version ID is 270a
[ 0.491670] dwmmc_rockchip ffc60000.dwmmc: DW MMC controller at irq 65,32 bit host data width,256 deep fifo
[ 0.491905] dwmmc_rockchip ffc60000.dwmmc: Linked as a consumer to regulator.5
[ 0.491976] dwmmc_rockchip ffc60000.dwmmc: GPIO lookup for consumer cd
[ 0.491986] dwmmc_rockchip ffc60000.dwmmc: using device tree for GPIO lookup
[ 0.492015] of_get_named_gpiod_flags: can’t parse ‘cd-gpios’ property of node ‘/dwmmc@ffc60000[0]’
[ 0.492038] of_get_named_gpiod_flags: can’t parse ‘cd-gpio’ property of node ‘/dwmmc@ffc60000[0]’
[ 0.492052] dwmmc_rockchip ffc60000.dwmmc: using lookup tables for GPIO lookup
[ 0.492062] dwmmc_rockchip ffc60000.dwmmc: No GPIO consumer cd found
[ 0.492076] dwmmc_rockchip ffc60000.dwmmc: GPIO lookup for consumer wp
[ 0.492085] dwmmc_rockchip ffc60000.dwmmc: using device tree for GPIO lookup
[ 0.492105] of_get_named_gpiod_flags: can’t parse ‘wp-gpios’ property of node ‘/dwmmc@ffc60000[0]’
[ 0.492124] of_get_named_gpiod_flags: can’t parse ‘wp-gpio’ property of node ‘/dwmmc@ffc60000[0]’
[ 0.492135] dwmmc_rockchip ffc60000.dwmmc: using lookup tables for GPIO lookup
[ 0.492144] dwmmc_rockchip ffc60000.dwmmc: No GPIO consumer wp found
[ 0.526702] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 200000000Hz, actual 198000000HZ div = 0)
[ 0.526777] dwmmc_rockchip ffc50000.dwmmc: Successfully tuned phase to 90
[ 0.528243] mmc0: new HS200 MMC card at address 0001
[ 0.531075] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
[ 0.532436] mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
[ 0.533732] mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
[ 0.534842] mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB, chardev (242:0)
[ 0.550575] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 0.611868] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.625620] dwmmc_rockchip ffc70000.dwmmc: IDMAC supports 32-bit address mode.
[ 0.625757] dwmmc_rockchip ffc70000.dwmmc: Using internal DMA controller.
[ 0.625794] dwmmc_rockchip ffc70000.dwmmc: Version ID is 270a
[ 0.625903] dwmmc_rockchip ffc70000.dwmmc: DW MMC controller at irq 66,32 bit host data width,256 deep fifo
[ 0.626009] dwmmc_rockchip ffc70000.dwmmc: GPIO lookup for consumer wp
[ 0.626019] dwmmc_rockchip ffc70000.dwmmc: using device tree for GPIO lookup
[ 0.626048] of_get_named_gpiod_flags: can’t parse ‘wp-gpios’ property of node ‘/dwmmc@ffc70000[0]’
[ 0.626070] of_get_named_gpiod_flags: can’t parse ‘wp-gpio’ property of node ‘/dwmmc@ffc70000[0]’
[ 0.626083] dwmmc_rockchip ffc70000.dwmmc: using lookup tables for GPIO lookup
[ 0.626094] dwmmc_rockchip ffc70000.dwmmc: No GPIO consumer wp found
[ 0.626155] dwmmc_rockchip ffc70000.dwmmc: allocated mmc-pwrseq
[ 0.626187] mmc_host mmc1: card is non-removable.
[ 0.639195] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.652947] usbcore: registered new interface driver usbhid
[ 0.653010] usbhid: USB HID core driver
[ 0.655390] rockchip-saradc ff5e0000.saradc: Linked as a consumer to regulator.2
[ 0.657642] rksfc_base v1.1 2016-01-08
[ 0.658355] rksfc ffc90000.sfc: rksfc_probe clk rate = 79200000
[ 0.658476] rkflash_dev_init enter
[ 0.658515] sfc nor id: 0 0 0
[ 0.658532] rkflash[1] is invalid
[ 0.658537] rkflash_dev_init enter
[ 0.658566] sfc_nand id: 0 0 0
[ 0.658579] rkflash[2] is invalid
[ 0.671511] NET: Registered protocol family 17
[ 0.671629] NET: Registered protocol family 15
[ 0.671883] Bluetooth: RFCOMM TTY layer initialized
[ 0.671929] Bluetooth: RFCOMM socket layer initialized
[ 0.671983] Bluetooth: RFCOMM ver 1.11
[ 0.672012] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.672045] Bluetooth: HIDP socket layer initialized
[ 0.672067] [BT_RFKILL]: Enter rfkill_rk_init
[ 0.672087] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 0.672755] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[ 0.672860] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6255
[ 0.672917] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[ 0.672945] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[ 0.673011] of_get_named_gpiod_flags: parsed ‘WIFI,poweren_gpio’ property of node ‘/wireless-wlan[0]’ - status (0)
[ 0.673020] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,poweren_gpio = 6 flags = 0.
[ 0.673054] of_get_named_gpiod_flags: can’t parse ‘WIFI,vbat_gpio’ property of node ‘/wireless-wlan[0]’
[ 0.673073] of_get_named_gpiod_flags: can’t parse ‘WIFI,reset_gpio’ property of node ‘/wireless-wlan[0]’
[ 0.673103] of_get_named_gpiod_flags: parsed ‘WIFI,host_wake_irq’ property of node ‘/wireless-wlan[0]’ - status (0)
[ 0.673110] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 8, flags = 0.
[ 0.673141] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[ 0.673164] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[ 0.673195] gpio-6 (reset): gpiod_request: status -16
[ 0.673200] [WLAN_RFKILL]: Failed to get rkwifi_wlan_poweren gpio.
[ 0.673255] wlan-platdata: probe of wireless-wlan failed with error -1
[ 0.673928] of_get_named_gpiod_flags: parsed ‘uart_rts_gpios’ property of node ‘/wireless-bluetooth[0]’ - status (0)
[ 0.673938] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 48.
[ 0.673993] of_get_named_gpiod_flags: parsed ‘BT,power_gpio’ property of node ‘/wireless-bluetooth[0]’ - status (0)
[ 0.674000] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 7.
[ 0.674031] of_get_named_gpiod_flags: can’t parse ‘BT,reset_gpio’ property of node ‘/wireless-bluetooth[0]’
[ 0.674051] of_get_named_gpiod_flags: can’t parse ‘BT,wake_gpio’ property of node ‘/wireless-bluetooth[0]’
[ 0.674081] of_get_named_gpiod_flags: parsed ‘BT,wake_host_irq’ property of node ‘/wireless-bluetooth[0]’ - status (0)
[ 0.674087] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 5.
[ 0.674115] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!.
[ 0.674216] [BT_RFKILL]: Request irq for bt wakeup host
[ 0.674400] [BT_RFKILL]: disable irq
[ 0.674616] [BT_RFKILL]: bt_default device registered.
[ 0.674996] flash vendor_init_thread!
[ 0.675018] flash vendor storage:20170308 ret = -1
[ 0.675996] Registering SWP/SWPB emulation handler
[ 0.678209] Loading compiled-in X.509 certificates
[ 0.680635] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[ 0.680659] rga2: Driver loaded successfully ver:3.02
[ 0.681020] rga2: Module initialized.
[ 0.700053] vendor storage:20190527 ret = 0
[ 0.719033] mmc_host mmc1: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[ 0.724948] rockchip-drm display-subsystem: devfreq is not set
[ 0.725554] rockchip-drm display-subsystem: bound ffb00000.vop (ops 0xb093bd80)
[ 0.725666] rockchip-drm display-subsystem: bound ffb30000.dsi (ops 0xb09424ac)
[ 0.725706] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.725738] [drm] No driver support for vblank timestamp query.
[ 0.742023] [drm] Initialized rockchip 2.0.0 20140818 for display-subsystem on minor 0
[ 0.742932] input: adc-keys as /devices/platform/adc-keys/input/input0
[ 0.749110] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 0.756533] cfg80211: Loaded X.509 cert ‘sforshee: 00b28ddf47aef9cea7’
[ 0.756817] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 0.756879] cfg80211: failed to load regulatory.db
[ 0.757586] rkcif rkcif_mipi_lvds: clear unready subdev num: 1
[ 0.758170] rkcif_mipi_lvds: Async subdev notifier completed
[ 0.758199] rkisp rkisp-vir0: clear unready subdev num: 1
[ 0.758814] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 0.758895] rkisp0: update sensor failed
[ 0.758918] rkisp rkisp-vir1: clear unready subdev num: 3
[ 0.758956] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 0.761203] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 0.761243] rkisp1: update sensor failed
[ 0.761364] ALSA device list:
[ 0.761386] #7: Loopback 1
[ 0.762521] mmc_host mmc1: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[ 0.774780] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[ 0.774894] VFS: Mounted root (ext4 filesystem) readonly on device 179:6.
[ 0.780000] devtmpfs: mounted
[ 0.782136] Freeing unused kernel memory: 1024K
[ 0.783288] Run /sbin/init as init process
[ 0.856059] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
[ 1.131173] udevd[118]: starting version 3.2.7
[ 1.141135] udevd[118]: specified group ‘kvm’ unknown
[ 1.181881] udevd[119]: starting eudev-3.2.7
[ 1.422124] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 1.422397] stream_cif_mipi_id0: update sensor info failed -19
[ 1.428409] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 1.428501] stream_cif_mipi_id1: update sensor info failed -19
[ 1.432728] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 1.432804] stream_cif_mipi_id3: update sensor info failed -19
[ 1.445326] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 1.445559] stream_cif_mipi_id2: update sensor info failed -19
[ 1.509075] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 1.679005] phy phy-ff4c0000.usb2-phy.1: charger = USB_CDP_CHARGER
[ 2.432275] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
[ 2.479398] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
[ 2.521811] EXT4-fs (mmcblk0p6): resizing filesystem from 60156 to 262144 blocks
[ 2.560555] EXT4-fs (mmcblk0p6): resized filesystem to 262144
[ 3.413373] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[ 4.787995] EXT4-fs (mmcblk0p8): mounting ext2 file system using the ext4 subsystem
[ 4.795068] EXT4-fs (mmcblk0p8): mounted filesystem without journal. Opts: (null)
[ 4.878190] EXT4-fs (mmcblk0p8): mounting ext2 file system using the ext4 subsystem
[ 4.884368] EXT4-fs (mmcblk0p8): mounted filesystem without journal. Opts: (null)
[ 5.259418] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.22 (r-20191105-2)(20191120-1)
[ 5.259501] ======== dhd_wlan_init_plat_data ========
[ 5.259522] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[ 5.259537] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: rfkill-wlan driver has not Successful initialized
[ 5.259552] dhd_wlan_init_gpio: unknown oob irqflags !
[ 5.259569] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=-1, oob_irq_flags=0x410
[ 5.259584] dhd_wlan_init_gpio: WL_REG_ON=-1
[ 5.259599] dhd_wifi_platform_load: Enter
[ 5.259615] Power-up adapter ‘DHD generic adapter’
[ 5.259754] wifi_platform_set_power = 1
[ 5.259784] ======== PULL WL_REG_ON(-1) HIGH! ========
[ 5.259801] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 5.259816] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
[ 5.565742] wifi_platform_bus_enumerate device present 1
[ 5.565790] ======== Card detection to detect SDIO card! ========
[ 5.565807] mmc1:mmc host rescan start!
[ 7.732444] failed to power up DHD generic adapter, 1 retry left
[ 7.748802] wifi_platform_set_power = 0
[ 7.748916] ======== PULL WL_REG_ON(-1) LOW! ========
[ 7.748992] [WLAN_RFKILL]: rockchip_wifi_power: 0
[ 7.749034] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
[ 7.749066] wifi_platform_bus_enumerate device present 0
[ 7.749086] ======== Card detection to remove SDIO card! ========
[ 7.749108] mmc1:mmc host rescan start!
[ 7.749250] wifi_platform_set_power = 1
[ 7.749297] ======== PULL WL_REG_ON(-1) HIGH! ========
[ 7.749327] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 7.749354] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
[ 8.055743] wifi_platform_bus_enumerate device present 1
[ 8.055790] ======== Card detection to detect SDIO card! ========
[ 8.055808] mmc1:mmc host rescan start!
[ 10.079089] failed to power up DHD generic adapter, 0 retry left
[ 10.095447] wifi_platform_set_power = 0
[ 10.095549] ======== PULL WL_REG_ON(-1) LOW! ========
[ 10.095570] [WLAN_RFKILL]: rockchip_wifi_power: 0
[ 10.095594] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
[ 10.095619] wifi_platform_bus_enumerate device present 0
[ 10.095634] ======== Card detection to remove SDIO card! ========
[ 10.095658] mmc1:mmc host rescan start!
[ 10.095691] failed to power up DHD generic adapter, max retry reached
[ 10.095713] unregister wifi platform drivers
[ 10.095735] wifi_platform_bus_enumerate device present 0
[ 10.095756] ======== Card detection to remove SDIO card! ========
[ 10.095782] mmc1:mmc host rescan start!
[ 10.095815] ======== dhd_wlan_deinit_plat_data ========
[ 10.095838] dhd_module_init: Failed to load the driver, try cnt 0
[ 10.095924] dhd_module_init: Failed to load driver max retry reached**
[ 10.095959] dhd_module_init: Exit err=-19
[ 10.314735] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 10.316250] rk_gmac-dwmac ffc40000.ethernet: rk_get_eth_addr: mac address: 42:ae:81:26:0a:a4
[ 10.316335] rk_gmac-dwmac ffc40000.ethernet: device MAC address 42:ae:81:26:0a:a4
[ 10.326372] dwmac4: Master AXI performs any burst length
[ 10.326447] rk_gmac-dwmac ffc40000.ethernet eth0: No Safety Features support found
[ 10.326504] rk_gmac-dwmac ffc40000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 10.327413] rk_gmac-dwmac ffc40000.ethernet eth0: registered PTP clock
[ 10.717912] file system registered
[ 10.761228] using random self ethernet address
[ 10.761305] using random host ethernet address
[ 10.944418] read descriptors
[ 10.944498] read strings
[ 11.333299] rk_gmac-dwmac ffc40000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 12.004839] galcore: loading out-of-tree module taints kernel.
[ 12.019007] galcore: npu init.
[ 12.020550] galcore: start npu probe.
[ 12.020819] galcore ffbc0000.npu: Linked as a consumer to regulator.7
[ 12.021283] npu: platform_get_irq irq = 68
[ 12.021323] npu: platform_get_resource registerMemBase = ffbc0000, registerMemSize = 4000
[ 12.021350] Galcore version 6.4.3.5.293908
[ 12.021370] Galcore options:
[ 12.021391] irqLine = 68
[ 12.021410] registerMemBase = 0xFFBC0000
[ 12.021430] registerMemSize = 0x00004000
[ 12.021449] contiguousSize = 0x00400000
[ 12.021469] contiguousBase = 0x0
[ 12.021488] externalSize = 0x00000000
[ 12.021507] externalBase = 0x0
[ 12.021526] exclusiveSize = 0x00000000
[ 12.021546] exclusiveBase = 0x0
[ 12.021565] bankSize = 0x00000000
[ 12.021585] fastClear = -1
[ 12.021604] compression = 15
[ 12.021623] powerManagement = 1
[ 12.021642] baseAddress = 0x00000000
[ 12.021661] physSize = 0x00000000
[ 12.021681] recovery = 1
[ 12.021701] stuckDump = 0
[ 12.021714] gpuProfiler = 1
[ 12.021727] userClusterMask = 0x0
[ 12.021740] GPU smallBatch = 1
[ 12.021758] allMapInOne = 1
[ 12.021777] irqs =
[ 12.021781] 68,
[ 12.021800] -1,
[ 12.021819] -1,
[ 12.021836] -1,
[ 12.021855] -1,
[ 12.021873] -1,
[ 12.021891] -1,
[ 12.021908] -1,
[ 12.021927] -1,
[ 12.021945] -1,
[ 12.021962]
[ 12.021985] registerBases =
[ 12.021989] 0xFFBC0000,
[ 12.022009] 0x00000000,
[ 12.022028] 0x00000000,
[ 12.022046] 0x00000000,
[ 12.022065] 0x00000000,
[ 12.022084] 0x00000000,
[ 12.022102] 0x00000000,
[ 12.022120] 0x00000000,
[ 12.022139] 0x00000000,
[ 12.022207] 0x00000000,
[ 12.022238]
[ 12.022288] registerSizes =
[ 12.022303] 0x00004000,
[ 12.022342] 0x00000000,
[ 12.022370] 0x00000000,
[ 12.022390] 0x00000000,
[ 12.022413] 0x00000000,
[ 12.022438] 0x00000000,
[ 12.022454] 0x00000000,
[ 12.022493] 0x00000000,
[ 12.022518] 0x00000000,
[ 12.022537] 0x00000000,
[ 12.022556]
[ 12.022595] chipIDs =
[ 12.022601] 0xFFFFFFFF,
[ 12.022633] 0xFFFFFFFF,
[ 12.022664] 0xFFFFFFFF,
[ 12.022684] 0xFFFFFFFF,
[ 12.022698] 0xFFFFFFFF,
[ 12.022717] 0xFFFFFFFF,
[ 12.022739] 0xFFFFFFFF,
[ 12.022759] 0xFFFFFFFF,
[ 12.022781] 0xFFFFFFFF,
[ 12.022800] 0xFFFFFFFF,
[ 12.022820]
[ 12.022851] core 0 internal sRAMBases =
[ 12.022855] 0xFFFFFFFFFFFFFFFF,
[ 12.022876] 0xFFFFFFFFFFFFFFFF,
[ 12.022896]
[ 12.022925] core 1 internal sRAMBases =
[ 12.022930] 0xFFFFFFFFFFFFFFFF,
[ 12.022944] 0xFFFFFFFFFFFFFFFF,
[ 12.022962]
[ 12.023000] core 2 internal sRAMBases =
[ 12.023006] 0xFFFFFFFFFFFFFFFF,
[ 12.023026] 0xFFFFFFFFFFFFFFFF,
[ 12.023046]
[ 12.023081] core 3 internal sRAMBases =
[ 12.023086] 0xFFFFFFFFFFFFFFFF,
[ 12.023106] 0xFFFFFFFFFFFFFFFF,
[ 12.023125]
[ 12.023162] core 4 internal sRAMBases =
[ 12.023166] 0xFFFFFFFFFFFFFFFF,
[ 12.023180] 0xFFFFFFFFFFFFFFFF,
[ 12.023201]
[ 12.023230] core 5 internal sRAMBases =
[ 12.023233] 0xFFFFFFFFFFFFFFFF,
[ 12.023253] 0xFFFFFFFFFFFFFFFF,
[ 12.023273]
[ 12.023310] core 6 internal sRAMBases =
[ 12.023314] 0xFFFFFFFFFFFFFFFF,
[ 12.023334] 0xFFFFFFFFFFFFFFFF,
[ 12.023369]
[ 12.023422] core 7 internal sRAMBases =
[ 12.023430] 0xFFFFFFFFFFFFFFFF,
[ 12.023462] 0xFFFFFFFFFFFFFFFF,
[ 12.023497]
[ 12.023568] core 8 internal sRAMBases =
[ 12.023578] 0xFFFFFFFFFFFFFFFF,
[ 12.023600] 0xFFFFFFFFFFFFFFFF,
[ 12.023619]
[ 12.023649] core 9 internal sRAMBases =
[ 12.023653] 0xFFFFFFFFFFFFFFFF,
[ 12.023668] 0xFFFFFFFFFFFFFFFF,
[ 12.023701]
[ 12.023738] External sRAMBases =
[ 12.023743] 0xffffffffffffffff,
[ 12.023767] 0xffffffffffffffff,
[ 12.023785]
[ 12.023816] mmuPageTablePool = 1
[ 12.023841] mmuDynamicMap = 1
[ 12.023871] isrPoll = 0x00000000
[ 12.023894] Build options:
[ 12.023909] gcdGPU_TIMEOUT = 20000
[ 12.023936] gcdGPU_2D_TIMEOUT = 4000
[ 12.023958] gcdINTERRUPT_STATISTIC = 1
[ 12.031713] Galcore Info: ContiguousBase=0x7f85a000 ContiguousSize=0x400000
[ 12.037561] Galcore Info: MMU mapped core 0 SRAM[0] hardware virtual address=0x400000 size=0x40000
[ 12.037619] Galcore Info: MMU mapped core 0 SRAM[1] hardware virtual address=0x440000 size=0x40000
[ 12.039868] NN flop resetting…
[ 12.045648] galcore ffbc0000.npu: Init npu devfreq
[ 12.045723] galcore ffbc0000.npu: bin=0
[ 12.045814] galcore ffbc0000.npu: leakage=1.375
[ 12.058220] galcore ffbc0000.npu: temp=56300, pvtm=107634 (107634 + 0)
[ 12.058552] galcore ffbc0000.npu: pvtm-volt-sel=1
[ 12.058626] galcore ffbc0000.npu: bin-scale=23
[ 12.059886] galcore ffbc0000.npu: avs=0
[ 12.060514] galcore ffbc0000.npu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
[ 12.060570] galcore ffbc0000.npu: failed to read out thermal zone (-22)
[ 12.060715] galcore ffbc0000.npu: failed to find power_model node
[ 12.060739] galcore ffbc0000.npu: failed to initialize power model
[ 12.182637] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 12.198577] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 12.214345] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 12.222624] android_work: sent uevent USB_STATE=CONNECTED
[ 12.225657] configfs-gadget gadget: high-speed config #1: b
[ 12.226473] android_work: sent uevent USB_STATE=CONFIGURED
[ 18.424504] EXT4-fs (mmcblk0p9): mounting ext2 file system using the ext4 subsystem
[ 18.429774] EXT4-fs (mmcblk0p9): mounted filesystem without journal. Opts: (null)
[ 23.022855] adbd (805): /proc/805/oom_adj is deprecated, please use /proc/805/oom_score_adj instead.
[ 32.052333] vcc_sd: disabling

rv1126-aybering.dts配置：

&i2c1 {
        status = "okay";
        clock-frequency = <400000>;

        imx415: imx415@1a {
                   compatible = "sony,imx415";
                   reg = <0x1a>;
                   clocks = <&cru CLK_MIPICSI_OUT>;
                   clock-names = "xvclk";
                   power-domains = <&power RV1126_PD_VI>;
                   pinctrl-names = "rockchip,camera_default";
                   pinctrl-0 = <&mipicsi_clk0>;
                   avdd-supply = <&vcc3v3_sys>;
                   dovdd-supply = <&vcc_1v8>;
                   dvdd-supply = <&vcc_dvdd>;
                   reset-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
                   rockchip,camera-module-index = <0>;
                   rockchip,camera-module-facing = "front";
                   rockchip,camera-module-name = "YT10092";
                   rockchip,camera-module-lens-name = "IR0147-28IRC-8M-F20";
                   ir-cut = <&cam_ircut0>;
                   port {
                                   ucam_out0: endpoint {
                                                   remote-endpoint = <&mipi_in_ucam0>;
                                                   data-lanes = <1 2 3 4>;
                                   };
                   };
        };

        gc2053_2: gc2053_2@3f {
            compatible = "galaxycore,gc2053";
            reg = <0x3f>;
            clocks = <&cru CLK_MIPICSI_OUT>;
            clock-names = "xvclk";

            power-domains = <&power RV1126_PD_VI>;
            pinctrl-names = "rockchip,camera_default";
            pinctrl-0 = <&mipicsi_clk1>;
            rockchip,camera-module-index = <1>;
            rockchip,camera-module-facing = "front";
            rockchip,camera-module-name = "CMK-OT1726-PG1";
            rockchip,camera-module-lens-name = "29IR-2MP-F25";
            port {
                    ucam_out1: endpoint {
                            remote-endpoint = <&csi_dphy1_input>;
                            data-lanes = <1 2>;
                    };
            };
    };
};