3391
- 收藏
- 点赞
- 分享
- 举报
hi3516d v300访问串口1时内核报错
大家好,最近调试Hi3516d v300的板子,发现访问/dev/ttyAMA1时,内核报错,
dts已经配置了Uart1,引脚复用也修改为了uart1的tx和rx
大家帮看看,有没有遇到过这个问题的,谢谢!
open tty: /dev/ttyAMA1 bitRate: 115200
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1176 at drivers/tty/serial/serial_core.c:440 uart_get_baud_rate+0xf4/0x158
Modules linked in: hi_mipi_rx(O) hi3516cv500_acodec(PO) hi3516cv500_adec(PO) hi3516cv500_aenc(PO) hi3516cv500_ao(PO) hi3516cv500_ai(PO) hi3516cv500_aio(PO) hi3516cv500_hdmi(PO) hi_sensor_i2c(O) hi_pwm(O) hi3516cv500_nnie(PO) hi3516cv500_ive(PO) hi3516cv500_vdec(PO) hi3516cv500_vfmw(PO) hi3516cv500_jpegd(PO) hi3516cv500_jpege(PO) hi3516cv500_h265e(PO) hi3516cv500_h264e(PO) hi3516cv500_vedu(PO) hi3516cv500_chnl(PO) hi3516cv500_venc(PO) hi3516cv500_rc(PO) hifb(O) hi3516cv500_vo(PO) hi3516cv500_vpss(PO) hi3516cv500_vi(PO) hi3516cv500_isp(PO) hi3516cv500_dis(PO) hi3516cv500_vgs(PO) hi3516cv500_gdc(PO) hi3516cv500_rgn(PO) hi3516cv500_tde(O) hi3516cv500_sys(PO) hi3516cv500_base(PO) hi_tzasc(PO) hi_osal(O) sys_config(O)
CPU: 1 PID: 1176 Comm: comtool Tainted: P O 4.9.37 #6
Hardware name: Generic DT based system
Backtrace:
[] (dump_backtrace) from [] (show_stack+0x18/0x1c)
r7:00000009 r6:600d0013 r5:00000000 r4:c05bc0f4
[] (show_stack) from [] (dump_stack+0x8c/0xa0)
[] (dump_stack) from [] (__warn+0xec/0x104)
r7:00000009 r6:c0515e88 r5:00000000 r4:00000000
[] (__warn) from [] (warn_slowpath_null+0x28/0x30)
r9:00000000 r8:00000000 r7:ffffeff0 r6:00000000 r5:c68beeb8 r4:00000002
[] (warn_slowpath_null) from [] (uart_get_baud_rate+0xf4/0x158)
[] (uart_get_baud_rate) from [] (pl011_set_termios+0x50/0x344)
r10:c68bee00 r9:0cc00041 r8:c68beeb8 r7:c68bee00 r6:c68bee00 r5:00000000
r4:c6922610 r3:00000000
[] (pl011_set_termios) from [] (uart_change_speed+0x38/0xf0)
r9:0cc00041 r8:00000000 r7:c68bee00 r6:c68bee00 r5:c69040fc r4:c6922610
[] (uart_change_speed) from [] (uart_startup.part.3+0xb0/0x148)
r7:c68bee00 r6:00000000 r5:c69040fc r4:c6922610
[] (uart_startup.part.3) from [] (uart_port_activate+0x58/0x64)
r9:0cc00041 r8:c5fec000 r7:c6904190 r6:c5f9fd80 r5:c68bee00 r4:c69040fc
[] (uart_port_activate) from [] (tty_port_open+0x94/0xd8)
[] (tty_port_open) from [] (uart_open+0x38/0x40)
r9:0cc00041 r8:c5fec000 r7:c05f92a8 r6:c0490c9c r5:c68c2780 r4:c5f9fd80
[] (uart_open) from [] (tty_open+0xdc/0x6ac)
[] (tty_open) from [] (chrdev_open+0xcc/0x188)
r10:c5fedf5c r9:c691a740 r8:c5f9fd80 r7:c6884650 r6:00000000 r5:c691a740
r4:c0490d14
[] (chrdev_open) from [] (do_dentry_open.constprop.3+0x204/0x30c)
r9:00000902 r8:c5fedea8 r7:c00f18cc r6:c5f9fd88 r5:c6884650 r4:c5f9fd80
[] (do_dentry_open.constprop.3) from [] (vfs_open+0x48/0x78)
r9:00000902 r8:c5fedea8 r7:00000000 r6:c6410660 r5:c5f9fd80 r4:c5fedea8
[] (vfs_open) from [] (path_openat+0x344/0xf3c)
r5:00000000 r4:00000000
[] (path_openat) from [] (do_filp_open+0x6c/0xd0)
r10:00000000 r9:c5fec000 r8:c000fa44 r7:00000001 r6:c5fedf5c r5:c5fedea8
r4:00000004
[] (do_filp_open) from [] (do_sys_open+0x11c/0x1cc)
r7:fffff000 r6:c5b28000 r5:ffffff9c r4:00000004
[] (do_sys_open) from [] (SyS_open+0x20/0x24)
r9:c5fec000 r8:c000fa44 r7:00000005 r6:be804bb8 r5:00047f70 r4:00047f18
[] (SyS_open) from [] (ret_fast_syscall+0x0/0x34)
---[ end trace 1a5befffcb78f888 ]---
open /dev/ttyAMA1 OK!
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1176 at drivers/tty/serial/serial_core.c:440 uart_get_baud_rate+0xf4/0x158
Modules linked in: hi_mipi_rx(O) hi3516cv500_acodec(PO) hi3516cv500_adec(PO) hi3516cv500_aenc(PO) hi3516cv500_ao(PO) hi3516cv500_ai(PO) hi3516cv500_aio(PO) hi3516cv500_hdmi(PO) hi_sensor_i2c(O) hi_pwm(O) hi3516cv500_nnie(PO) hi3516cv500_ive(PO) hi3516cv500_vdec(PO) hi3516cv500_vfmw(PO) hi3516cv500_jpegd(PO) hi3516cv500_jpege(PO) hi3516cv500_h265e(PO) hi3516cv500_h264e(PO) hi3516cv500_vedu(PO) hi3516cv500_chnl(PO) hi3516cv500_venc(PO) hi3516cv500_rc(PO) hifb(O) hi3516cv500_vo(PO) hi3516cv500_vpss(PO) hi3516cv500_vi(PO) hi3516cv500_isp(PO) hi3516cv500_dis(PO) hi3516cv500_vgs(PO) hi3516cv500_gdc(PO) hi3516cv500_rgn(PO) hi3516cv500_tde(O) hi3516cv500_sys(PO) hi3516cv500_base(PO) hi_tzasc(PO) hi_osal(O) sys_config(O)
CPU: 1 PID: 1176 Comm: comtool Tainted: P W O 4.9.37 #6
Hardware name: Generic DT based system
Backtrace:
[] (dump_backtrace) from [] (show_stack+0x18/0x1c)
r7:00000009 r6:600e0013 r5:00000000 r4:c05bc0f4
[] (show_stack) from [] (dump_stack+0x8c/0xa0)
[] (dump_stack) from [] (__warn+0xec/0x104)
r7:00000009 r6:c0515e88 r5:00000000 r4:00000000
[] (__warn) from [] (warn_slowpath_null+0x28/0x30)
r9:00000000 r8:00000000 r7:ffffeff0 r6:0000000
dts已经配置了Uart1,引脚复用也修改为了uart1的tx和rx
大家帮看看,有没有遇到过这个问题的,谢谢!
open tty: /dev/ttyAMA1 bitRate: 115200
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1176 at drivers/tty/serial/serial_core.c:440 uart_get_baud_rate+0xf4/0x158
Modules linked in: hi_mipi_rx(O) hi3516cv500_acodec(PO) hi3516cv500_adec(PO) hi3516cv500_aenc(PO) hi3516cv500_ao(PO) hi3516cv500_ai(PO) hi3516cv500_aio(PO) hi3516cv500_hdmi(PO) hi_sensor_i2c(O) hi_pwm(O) hi3516cv500_nnie(PO) hi3516cv500_ive(PO) hi3516cv500_vdec(PO) hi3516cv500_vfmw(PO) hi3516cv500_jpegd(PO) hi3516cv500_jpege(PO) hi3516cv500_h265e(PO) hi3516cv500_h264e(PO) hi3516cv500_vedu(PO) hi3516cv500_chnl(PO) hi3516cv500_venc(PO) hi3516cv500_rc(PO) hifb(O) hi3516cv500_vo(PO) hi3516cv500_vpss(PO) hi3516cv500_vi(PO) hi3516cv500_isp(PO) hi3516cv500_dis(PO) hi3516cv500_vgs(PO) hi3516cv500_gdc(PO) hi3516cv500_rgn(PO) hi3516cv500_tde(O) hi3516cv500_sys(PO) hi3516cv500_base(PO) hi_tzasc(PO) hi_osal(O) sys_config(O)
CPU: 1 PID: 1176 Comm: comtool Tainted: P O 4.9.37 #6
Hardware name: Generic DT based system
Backtrace:
[
r7:00000009 r6:600d0013 r5:00000000 r4:c05bc0f4
[
[
r7:00000009 r6:c0515e88 r5:00000000 r4:00000000
[
r9:00000000 r8:00000000 r7:ffffeff0 r6:00000000 r5:c68beeb8 r4:00000002
[
[
r10:c68bee00 r9:0cc00041 r8:c68beeb8 r7:c68bee00 r6:c68bee00 r5:00000000
r4:c6922610 r3:00000000
[
r9:0cc00041 r8:00000000 r7:c68bee00 r6:c68bee00 r5:c69040fc r4:c6922610
[
r7:c68bee00 r6:00000000 r5:c69040fc r4:c6922610
[
r9:0cc00041 r8:c5fec000 r7:c6904190 r6:c5f9fd80 r5:c68bee00 r4:c69040fc
[
[
r9:0cc00041 r8:c5fec000 r7:c05f92a8 r6:c0490c9c r5:c68c2780 r4:c5f9fd80
[
[
r10:c5fedf5c r9:c691a740 r8:c5f9fd80 r7:c6884650 r6:00000000 r5:c691a740
r4:c0490d14
[
r9:00000902 r8:c5fedea8 r7:c00f18cc r6:c5f9fd88 r5:c6884650 r4:c5f9fd80
[
r9:00000902 r8:c5fedea8 r7:00000000 r6:c6410660 r5:c5f9fd80 r4:c5fedea8
[
r5:00000000 r4:00000000
[
r10:00000000 r9:c5fec000 r8:c000fa44 r7:00000001 r6:c5fedf5c r5:c5fedea8
r4:00000004
[
r7:fffff000 r6:c5b28000 r5:ffffff9c r4:00000004
[
r9:c5fec000 r8:c000fa44 r7:00000005 r6:be804bb8 r5:00047f70 r4:00047f18
[
---[ end trace 1a5befffcb78f888 ]---
open /dev/ttyAMA1 OK!
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1176 at drivers/tty/serial/serial_core.c:440 uart_get_baud_rate+0xf4/0x158
Modules linked in: hi_mipi_rx(O) hi3516cv500_acodec(PO) hi3516cv500_adec(PO) hi3516cv500_aenc(PO) hi3516cv500_ao(PO) hi3516cv500_ai(PO) hi3516cv500_aio(PO) hi3516cv500_hdmi(PO) hi_sensor_i2c(O) hi_pwm(O) hi3516cv500_nnie(PO) hi3516cv500_ive(PO) hi3516cv500_vdec(PO) hi3516cv500_vfmw(PO) hi3516cv500_jpegd(PO) hi3516cv500_jpege(PO) hi3516cv500_h265e(PO) hi3516cv500_h264e(PO) hi3516cv500_vedu(PO) hi3516cv500_chnl(PO) hi3516cv500_venc(PO) hi3516cv500_rc(PO) hifb(O) hi3516cv500_vo(PO) hi3516cv500_vpss(PO) hi3516cv500_vi(PO) hi3516cv500_isp(PO) hi3516cv500_dis(PO) hi3516cv500_vgs(PO) hi3516cv500_gdc(PO) hi3516cv500_rgn(PO) hi3516cv500_tde(O) hi3516cv500_sys(PO) hi3516cv500_base(PO) hi_tzasc(PO) hi_osal(O) sys_config(O)
CPU: 1 PID: 1176 Comm: comtool Tainted: P W O 4.9.37 #6
Hardware name: Generic DT based system
Backtrace:
[
r7:00000009 r6:600e0013 r5:00000000 r4:c05bc0f4
[
[
r7:00000009 r6:c0515e88 r5:00000000 r4:00000000
[
r9:00000000 r8:00000000 r7:ffffeff0 r6:0000000
我来回答
回答0个
时间排序
认可量排序
暂无数据
或将文件直接拖到这里
悬赏:
E币
网盘
* 网盘链接:
* 提取码:
悬赏:
E币
Markdown 语法
- 加粗**内容**
- 斜体*内容*
- 删除线~~内容~~
- 引用> 引用内容
- 代码`代码`
- 代码块```编程语言↵代码```
- 链接[链接标题](url)
- 无序列表- 内容
- 有序列表1. 内容
- 缩进内容
- 图片![alt](url)
相关问答
-
2020-04-14 22:26:39
-
2016-09-27 15:05:11
-
2019-05-27 20:49:31
-
2017-06-23 15:05:57
-
2020-09-09 09:54:00
-
2017-05-24 19:34:09
-
2017-06-23 15:06:42
-
2017-11-03 16:44:31
-
2017-03-07 10:59:59
-
2016-10-10 17:04:26
-
252015-01-23 01:53:02
-
2016-03-17 23:21:30
-
2021-06-16 20:14:24
-
2016-10-12 17:13:54
-
2020-05-09 17:43:35
-
2018-01-12 09:31:18
-
2017-05-17 16:07:12
-
2017-08-15 22:55:23
-
2018-03-13 16:57:56
无更多相似问答 去提问
点击登录
-- 积分
-- E币
提问
—
收益
—
被采纳
—
我要提问
切换马甲
上一页
下一页
悬赏问答
-
50如何获取vpss chn的图像修改后发送至vo
-
5FPGA通过Bt1120传YUV422数据过来,vi接收不到数据——3516dv500
-
50SS928 运行PQtools 拼接 推到设备里有一半画面会异常
-
53536AV100的sample_vdec输出到CVBS显示
-
10海思板子mpp怎么在vi阶段改变视频数据尺寸
-
10HI3559AV100 多摄像头同步模式
-
9海思ss928单路摄像头vio中加入opencv处理并显示
-
10EB-RV1126-BC-191板子运行自己编码的程序
-
10求HI3519DV500_SDK_V2.0.1.1
-
5有偿求HI3516DV500 + OV5647驱动
举报反馈
举报类型
- 内容涉黄/赌/毒
- 内容侵权/抄袭
- 政治相关
- 涉嫌广告
- 侮辱谩骂
- 其他
详细说明
提醒
你的问题还没有最佳答案,是否结题,结题后将扣除20%的悬赏金
取消
确认
提醒
你的问题还没有最佳答案,是否结题,结题后将根据回答情况扣除相应悬赏金(1回答=1E币)
取消
确认