qn1556594976

qn1556594976

0个粉丝

22

问答

0

专栏

0

资料

qn1556594976  发布于  2019-06-29 18:07:59
采纳率 0%
22个问答
3645

wpa_supplicant连不上wifi

 
wpa_cli -i wlan0 select_network 0
RTW: wlan0 sleep m0=0x00000002, ori reg_0x4d4=0x00000000
OK
/etc # RTW: wlan0 wakeup m0=0x00000002, ori reg_0x4d4=0x00000002
RTW: survey done event(3c) band:0 for wlan0
RTW: rtw_indicate_scan_done(wlan0)
RTW: wlan0 sleep m0=0x00000002, ori reg_0x4d4=0x00000000
RTW: wlan0 wakeup m0=0x00000002, ori reg_0x4d4=0x00000002
RTW: survey done event(3d) band:0 for wlan0
RTW: rtw_indicate_scan_done(wlan0)
cfg80211: Calling CRDA to update world regulatory domain
RTW: wlan0 sleep m0=0x00000002, ori reg_0x4d4=0x00000000
RTW: wlan0 wakeup m0=0x00000002, ori reg_0x4d4=0x00000002
RTW: survey done event(41) band:0 for wlan0
RTW: rtw_indicate_scan_done(wlan0)
RTW: wlan0 sleep m0=0x00000002, ori reg_0x4d4=0x00000000
RTW: wlan0 wakeup m0=0x00000002, ori reg_0x4d4=0x00000002
RTW: survey done event(43) band:0 for wlan0
RTW: rtw_indicate_scan_done(wlan0)
Trying to associate with 2c:57:31:ac:6a:RTW: =>rtw_wx_set_essid
12 (SSID='qweqweqwe' freq=2462 MHz)
RTW: <=rtw_wx_set_essid, ret 0
RTW: wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
RTW: rtw_ps_deny_cancel(wlan0): [ERROR] Reason 7 had been canceled before!!
RTW: set_mode = IW_MODE_INFRA
RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =20:32:33:6a:d3:c1
RTW: #### hw_var_set_opmode() -4639 hw_port(0) mode = 2 ####
RTW:
wpa_ie(length:24):
RTW: 0xdd 0x16 0x00 0x50 0xf2 0x01 0x01 0x00
RTW: 0x00 0x50 0xf2 0x02 0x01 0x00 0x00 0x50
RTW: 0xf2 0x04 0x01 0x00 0x00 0x50 0xf2 0x02
RTW: rtw_wx_set_freq: set to channel 11
RTW: set bssid:2c:57:31:ac:6a:12
RTW: Set BSSID under fw_state=0x00000008
RTW: [by_bssid:1][assoc_ssid:][to_roam:0] new candidate: qweqweqwe(2c:57:31:ac:6a:12, ch11) rssi:-47
RTW: rtw_select_and_join_from_scanned_queue: candidate: qweqweqwe(2c:57:31:ac:6a:12, ch:11)
RTW: link to new AP
RTW: [HT] HAL Support STBC = 0x01
RTW: [HT] Declare supporting RX STBC = 1
RTW: rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set
RTW: rtw_chk_start_clnt_join(wlan0) req: 11,0,0
RTW: rtw_chk_start_clnt_join(wlan0) union: 11,0,0
RTW: =>rtw_wx_set_essid
RTW: ssid=qweqweqwe, len=9
RTW: set ssid [qweqweqwe] fw_state=0x00000088
RTW: Set SSID under fw_state=0x00000088
RTW: <=rtw_wx_set_essid, ret 0
RTW: rtw_hal_set_bssid wlan0- hw port -0 BSSID: 2c:57:31:ac:6a:12
RTW: OnBeacon: beacon keys ready
RTW: link to new AP
RTW: start auth
RTW: issue_auth
RTW: OnAuthClient
RTW: auth success, start assoc
RTW: network.SupportedRates[0]=82
RTW: network.SupportedRates[1]=84
RTW: network.SupportedRates[2]=8B
RTW: network.SupportedRates[3]=96
RTW: network.SupportedRates[4]=0C
RTW: network.SupportedRates[5]=12
RTW: network.SupportedRates[6]=18
RTW: network.SupportedRates[7]=24
RTW: network.SupportedRates[8]=30
RTW: network.SupportedRates[9]=48
RTW: network.SupportedRates[10]=60
RTW: network.SupportedRates[11]=6C
RTW: bssrate_len = 12
RTW: OnAssocRsp
RTW: report_join_res(1)
RTW: rtw_joinbss_update_network
RTW: +rtw_update_ht_cap()
RTW: rtw_alloc_macid(wlan0) if1, mac_addr:2c:57:31:ac:6a:12 macid:0
RTW: rtw_joinbss_update_stainfo
RTW: rtw_get_sta_tx_nss: 1 SS
RTW: rtw_get_sta_rx_nss: 1 SS
RTW: STA - MAC_ID:0, Tx - 1 SS, Rx - 1 SS
RTW: STA - MAC_ID:0, SM_PS 3
RTW: ht_mcs_set=ff 00 00 00, nss=1, bitmap=000000ff
RTW: ### Set STA_(0) info ###
RTW: rtw_cfg80211_indicate_connect(wlan0)
RTW: assoc success
RTW: recv eapol packet
------------[ cut here ]------------
WARNING: CPU: 0 PID: 15 at net/wireless/sme.c:655 cfg80211_process_wdev_events+0x148/0x184 [cfg80211]()
Modules linked in: rtl8192eu(O) cfg80211
CPU: 0 PID: 15 Comm: kworker/u2:1 Tainted: G        W  O   3.18.20 #1
Workqueue: cfg80211 cfg80211_event_work [cfg80211]
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (warn_slowpath_common+0x64/0x84)
[] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24)
[] (warn_slowpath_null) from [] (cfg80211_process_wdev_events+0x148/0x184 [cfg80211])
[] (cfg80211_process_wdev_events [cfg80211]) from [] (cfg80211_process_rdev_events+0x2c/0x64 [cfg80211])
[] (cfg80211_process_rdev_events [cfg80211]) from [] (cfg80211_event_work+0x14/0x1c [cfg80211])
[] (cfg80211_event_work [cfg80211]) from [] (process_one_work+0x11c/0x320)
[] (process_one_work) from [] (worker_thread+0x54/0x49c)
[] (worker_thread) from [] (kthread+0xb4/0xd0)
[] (kthread) from [] (ret_from_fork+0x14/0x2c)
---[ end trace 7537f73b6db1e1c5 ]---
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
RTW: rtw_ndev_notifier_call(wlan0) state:4
RTW: HW_VAR_BASIC_RATE: 0x15f->0x15f->0x15f
RTW: WMM(0): 0, a42b
RTW: WMM(1): 0, a44f
RTW: WMM(2): 0, 5e4322
RTW: WMM(3): 0, 2f3222
RTW: wmm_para_seq(0): 0
RTW: wmm_para_seq(1): 1
RTW: wmm_para_seq(2): 2
RTW: wmm_para_seq(3): 3
RTW: HTOnAssocRsp
RTW: ============ STA [2c:57:31:ac:6a:12]  ===================
RTW: mac_id : 0
RTW: wireless_mode : 0x0b
RTW: mimo_type : 0
RTW: bw_mode : 20MHz, ra_bw_mode : 20MHz
RTW: rate_id : 3
RTW: rssi : 55 (%), rssi_level : 0
RTW: is_support_sgi : Y, is_vht_enable : N
RTW: disable_ra : N, disable_pt : N
RTW: is_noisy : N
RTW: txrx_state : 0
RTW: curr_tx_rate : CCK_1M (L)
RTW: curr_tx_bw : 20MHz
RTW: curr_retry_ratio : 0
RTW: ra_mask : 0x00000000000fffff

RTW: wlan0 wakeup macid=0, ori reg_0x4d4=0x00000000
RTW: +rtl8188f_download_rsvd_page(wlan0): hw_port=0 mstatus(1)
RTW: _rtw_hal_set_fw_rsvd_page PageSize: 128, RsvdPageNUm: 8
RTW: LocPsPoll: 1
RTW: LocNullData: 2
RTW: LocQosNull: 3
RTW: _rtw_hal_set_fw_rsvd_page PageNum(4), pktlen(512)
RTW: _rtw_hal_set_fw_rsvd_page: Set RSVD page location to Fw ,TotalPacketLen(512), TotalPageNum(4)
RTW: RsvdPageLoc: ProbeRsp=0 PsPoll=1 Null=2 QoSNull=3 BTNull=0
RTW: wlan0: 1 DL RSVD page success! DLBcnCount:1, poll:1
RTW: =>mlmeext_joinbss_event_callback - End to Connection without 4-way
RTW: recv eapol packet
RTW: recv eapol packet
RTW: recv eapol packet
RTW: Group handshake still in progress !!!
RTW: OnDeAuth(wlan0) - Start to Disconnect
RTW: OnDeAuth(wlan0) reason=2, ta=2c:57:31:ac:6a:12, ignore=0
RTW: receive_disconnect
RTW: report_del_sta_event(wlan0) 2c:57:31:ac:6a:12 mac_id=0, enqueue:1, res:1
RTW: rtw_stadel_event_callback(mac_id=0)=2c:57:31:ac:6a:12
RTW: rtw_sta_mstatus_disc_rpt(wlan0) - mac_id=0
RTW: wlan0 wakeup macid=0, ori reg_0x4d4=0x00000000
RTW: rtw_hal_set_bssid wlan0- hw port -0 BSSID: 00:00:00:00:00:00
RTW: rtw_free_assoc_resources-wlan0 tgt_network MacAddress=2c:57:31:ac:6a:12 ssid=qweqweqwe
RTW: ### Clean STA_(0) info ###
RTW: rtw_release_macid(wlan0) if1, mac_addr:2c:57:31:ac:6a:12 macid:0
RTW: free disconnecting network of scanned_queue
RTW: rtw_cfg80211_unlink_bss(): cfg80211_unlink qweqweqwe!!
RTW: rtw_cfg80211_indicate_disconnect(wlan0)
RTW: rtw_cfg80211_indicate_disconnect(wlan0) call cfg80211_disconnected
RTW: rtw_reset_securitypriv(wlan0) - End to Disconnect
RTW: rtw_ndev_notifier_call(wlan0) state:4
RTW: cfg80211_rtw_del_key(wlan0) key_index=0, addr=  (null)
RTW: cfg80211_rtw_del_key(wlan0) key_index=1, addr=  (null)
RTW: cfg80211_rtw_del_key(wlan0) key_index=2, addr=  (null)
RTW: cfg80211_rtw_del_key(wlan0) key_index=3, addr=  (null)
RTW: cfg80211_rtw_del_key(wlan0) key_index=4, addr=  (null)
RTW: cfg80211_rtw_del_key(wlan0) key_index=5, addr=  (null)
cfg80211: Calling CRDA to update world regulatory domain
Authentication with 2c:57:31:ac:6a:12 timed out.RTW: wlan0 sleep m0=0x00000002, ori reg_0x4d4=0x00000000

RTW: wlan0 wakeup m0=0x00000002, ori reg_0x4d4=0x00000002
RTW: survey done event(47) band:0 for wlan0
RTW: rtw_indicate_scan_done(wlan0)
Trying to associate with 2c:57:31:ac:6a:RTW: =>rtw_wx_set_essid
12 (SSID='qweqweqwe' freq=2462 MHz)
RTW: <=rtw_wx_set_essid, ret 0
RTW: wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
RTW: rtw_ps_deny_cancel(wlan0): [ERROR] Reason 7 had been canceled before!!
RTW: set_mode = IW_MODE_INFRA
RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =20:32:33:6a:d3:c1
RTW: #### hw_var_set_opmode() -4639 hw_port(0) mode = 2 ####
RTW:
wpa_ie(length:24):
RTW: 0xdd 0x16 0x00 0x50 0xf2 0x01 0x01 0x00
RTW: 0x00 0x50 0xf2 0x02 0x01 0x00 0x00 0x50
RTW: 0xf2 0x04 0x01 0x00 0x00 0x50 0xf2 0x02
RTW: rtw_wx_set_freq: set to channel 11
RTW: set bssid:2c:57:31:ac:6a:12
RTW: Set BSSID under fw_state=0x00000008
RTW: [by_bssid:1][assoc_ssid:][to_roam:0] new candidate: qweqweqwe(2c:57:31:ac:6a:12, ch11) rssi:-58
RTW: rtw_select_and_join_from_scanned_queue: candidate: qweqweqwe(2c:57:31:ac:6a:12, ch:11)
RTW: link to new AP
RTW: [HT] HAL Support STBC = 0x01
RTW: [HT] Declare supporting RX STBC = 1
RTW: rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set
RTW: rtw_chk_start_clnt_join(wlan0) req: 11,0,0
RTW: rtw_chk_start_clnt_join(wlan0) union: 11,0,0
RTW: =>rtw_wx_set_essid
RTW: ssid=qweqweqwe, len=9
RTW: set ssid [qweqweqwe] fw_state=0x00000088
RTW: Set SSID under fw_state=0x00000088
RTW: <=rtw_wx_set_essid, ret 0
RTW: rtw_hal_set_bssid wlan0- hw port -0 BSSID: 2c:57:31:ac:6a:12
RTW: OnBeacon: beacon keys ready
RTW: link to new AP
RTW: start auth
RTW: issue_auth
RTW: OnAuthClient
RTW: auth success, start assoc
RTW: network.SupportedRates[0]=82
RTW: network.SupportedRates[1]=84
RTW: network.SupportedRates[2]=8B
RTW: network.SupportedRates[3]=96
RTW: network.SupportedRates[4]=0C
RTW: network.SupportedRates[5]=12
RTW: network.SupportedRates[6]=18
RTW: network.SupportedRates[7]=24
RTW: network.SupportedRates[8]=30
RTW: network.SupportedRates[9]=48
RTW: network.SupportedRates[10]=60
RTW: network.SupportedRates[11]=6C
RTW: bssrate_len = 12
RTW: OnAssocRsp
RTW: report_join_res(2)
RTW: rtw_joinbss_update_network
RTW: +rtw_update_ht_cap()
RTW: rtw_alloc_macid(wlan0) if1, mac_addr:2c:57:31:ac:6a:12 macid:0
RTW: rtw_joinbss_update_stainfo
RTW: rtw_get_sta_tx_nss: 1 SS
RTW: rtw_get_sta_rx_nss: 1 SS
RTW: STA - MAC_ID:0, Tx - 1 SS, Rx - 1 SS
RTW: STA - MAC_ID:0, SM_PS 3
RTW: ht_mcs_set=ff 00 00 00, nss=1, bitmap=000000ff
RTW: ### Set STA_(0) info ###
RTW: rtw_cfg80211_indicate_connect(wlan0)
RTW: assoc success
RTW: recv eapol packet
------------[ cut here ]------------
WARNING: CPU: 0 PID: 15 at net/wireless/sme.c:655 cfg80211_process_wdev_events+0x148/0x184 [cfg80211]()
Modules linked in: rtl8192eu(O) cfg80211
CPU: 0 PID: 15 Comm: kworker/u2:1 Tainted: G        W  O   3.18.20 #1
Workqueue: cfg80211 cfg80211_event_work [cfg80211]
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (warn_slowpath_common+0x64/0x84)
[] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24)
[] (warn_slowpath_null) from [] (cfg80211_process_wdev_events+0x148/0x184 [cfg80211])
[] (cfg80211_process_wdev_events [cfg80211]) from [] (cfg80211_process_rdev_events+0x2c/0x64 [cfg80211])
[] (cfg80211_process_rdev_events [cfg80211]) from [] (cfg80211_event_work+0x14/0x1c [cfg80211])
[] (cfg80211_event_work [cfg80211]) from [] (process_one_work+0x11c/0x320)
[] (process_one_work) from [] (worker_thread+0x54/0x49c)
[] (worker_thread) from [] (kthread+0xb4/0xd0)
[] (kthread) from [] (ret_from_fork+0x14/0x2c)
---[ end trace 7537f73b6db1e1c6 ]---
RTW: rtw_ndev_notifier_call(wlan0) state:4
RTW: HW_VAR_BASIC_RATE: 0x15f->0x15f->0x15f
RTW: WMM(0): 0, a42b
RTW: WMM(1): 0, a44f
RTW: WMM(2): 0, 5e4322
RTW: WMM(3): 0, 2f3222
RTW: wmm_para_seq(0): 0
RTW: wmm_para_seq(1): 1
RTW: wmm_para_seq(2): 2
RTW: wmm_para_seq(3): 3
RTW: HTOnAssocRsp
RTW: ============ STA [2c:57:31:ac:6a:12]  ===================
RTW: mac_id : 0
RTW: wireless_mode : 0x0b
RTW: mimo_type : 0
RTW: bw_mode : 20MHz, ra_bw_mode : 20MHz
RTW: rate_id : 3
RTW: rssi : 73 (%), rssi_level : 0
RTW: is_support_sgi : Y, is_vht_enable : N
RTW: disable_ra : N, disable_pt : N
RTW: is_noisy : N
RTW: txrx_state : 0
RTW: curr_tx_rate : CCK_1M (L)
RTW: curr_tx_bw : 20MHz
RTW: curr_retry_ratio : 0
RTW: ra_mask : 0x00000000000fffff

RTW: wlan0 wakeup macid=0, ori reg_0x4d4=0x00000000
RTW: +rtl8188f_download_rsvd_page(wlan0): hw_port=0 mstatus(1)
RTW: _rtw_hal_set_fw_rsvd_page PageSize: 128, RsvdPageNUm: 8
RTW: LocPsPoll: 1
RTW: LocNullData: 2
RTW: LocQosNull: 3
RTW: _rtw_hal_set_fw_rsvd_page PageNum(4), pktlen(512)
RTW: _rtw_hal_set_fw_rsvd_page: Set RSVD page location to Fw ,TotalPacketLen(512), TotalPageNum(4)
RTW: RsvdPageLoc: ProbeRsp=0 PsPoll=1 Null=2 QoSNull=3 BTNull=0
RTW: wlan0: 1 DL RSVD page success! DLBcnCount:1, poll:1
RTW: =>mlmeext_joinbss_event_callback - End to Connection without 4-way
RTW: recv eapol packet
我来回答
回答6个
时间排序
认可量排序

david

41个粉丝

368

问答

253

专栏

229

资料

david 2019-06-29 21:35:02
认可0
查看下dhcp 配置是不是正确,曾经卡在dhcp这边

qn1556594976

0个粉丝

22

问答

0

专栏

0

资料

qn1556594976 2019-06-30 14:17:48
认可0
[quote][url=forum.php?mod=redirect&goto=findpost&pid=144779&ptid=75028]david 发表于 2019-6-29 21:35[/url]
查看下dhcp 配置是不是正确,曾经卡在dhcp这边[/quote]

什么意思?我用iwconfig可以正常连接,获取ip,可以上网.

qn1556594976

0个粉丝

22

问答

0

专栏

0

资料

qn1556594976 2019-06-30 14:36:48
认可0
[quote][url=forum.php?mod=redirect&goto=findpost&pid=144779&ptid=75028]david 发表于 2019-6-29 21:35[/url]
查看下dhcp 配置是不是正确,曾经卡在dhcp这边[/quote]

/etc # wpa_supplicant -Dwext -iwlan0 -c/etc/wpa.conf &
/etc # RTW: rtw_ndev_notifier_call(wlan0) state:13
RTW: _netdev_open(wlan0) , bup=0
RTW:  power-on :REG_SYS_CLKR 0x09=0xfc. REG_CR 0x100=0x3f.
RTW:  MAC has already power on.
RTW: rtl8188f_FirmwareDownload fw: FW_NIC, size: 20288
RTW: rtl8188f_FirmwareDownload: fw_ver=d fw_subver=0000 sig=0x88f1, Month=02, Date=06, Hour=16, Minute=59
RTW: rtl8188f_FirmwareDownload(): Shift for fw header!
RTW: rtl8188f_FirmwareDownload by IO write!
RTW: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00040105
RTW: _8051Reset8188: Finish
RTW: _FWFreeToGo: Polling FW ready OK! (86, 20ms), REG_MCUFWDL:0x000401c6
RTW: rtl8188f_FirmwareDownload: DLFW OK !
RTW: rtl8188f_FirmwareDownload success. write_fw:1, 80ms
RTW:  <=== rtl8188f_FirmwareDownload()
RTW: fw download ok!
RTW: PHY_MACConfig8188F OK!
RTW: PHY_BBConfig8188F OK!
RTW: PHY_RFConfig8188F OK!
RTW: usb_AggSettingRxUpdate: RX Aggregation USB mode, size=12KB, timeout=256us
RTW: rtl8188fu_hal_init in 770ms
RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =20:32:33:6a:d3:c1
RTW: rtw_hal_get_macaddr_port wlan0- hw port(0) mac_addr =20:32:33:6a:d3:c1
RTW: wlan0- hw port(0) mac_addr =20:32:33:6a:d3:c1
RTW: [HW_VAR_ENABLE_RX_BAR] 0x6A2=0x500
RTW: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:0
RTW: kfree gain_offset 0x55:0x82060 RTW:  after :0x2060
RTW: MAC Address = 20:32:33:6a:d3:c1
RTW: rtw_start_drv_threads(wlan0) start RTW_CMD_THREAD
RTW: rtw_cfg80211_init_wiphy:rf_type=0
RTW: [HT] HAL Support STBC = 0x01
RTW: -871x_drv - drv_open, bup=1
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
RTW: cfg80211_rtw_set_power_mgmt(wlan0) enabled:0, timeout:-1
RTW: rtw_ndev_notifier_call(wlan0) state:1
RTW: [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
RTW: rtw_ps_deny_cancel(wlan0): [ERROR] Reason 7 had been canceled before!!
RTW: set_mode = IW_MODE_INFRA
RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =20:32:33:6a:d3:c1
RTW: #### hw_var_set_opmode() -4639 hw_port(0) mode = 2 ####
RTW: set bssid:00:00:00:00:00:00
ioctl[SIOCSIWAP]: Operation not permitted
RTW: rtw_ndev_notifier_call(wlan0) state:4
RTW: [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!


我启动wpa_supplicant
wpa_supplicant -Dwext -iwlan0 -c/etc/wpa.conf &
输出的
RTW: [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
RTW: rtw_ps_deny_cancel(wlan0): [ERROR] Reason 7 had been canceled before!!
RTW: set_mode = IW_MODE_INFRA
这里有个error是不是有问题,是什么原因

min_123

0个粉丝

3

问答

0

专栏

0

资料

min_123 2020-03-24 15:54:02
认可0
请问wpa_supplicant wpa_cli这两个工具是怎么编译的,aarch64-himix100-linux-gcc交叉编译后放在板子上,如下
[code]./wpa_supplicant: line 1: syntax error: unexpected "("[/code]
谢谢亲

324yy

0个粉丝

0

问答

0

专栏

0

资料

324yy 2024-08-09 15:18:18
认可0

遇到同样的问题了,有解决方案吗

dmmonstr

0个粉丝

5

问答

0

专栏

0

资料

dmmonstr 2024-09-12 14:16:05
认可0

我也遇到相同问题了,有解决方案吗

或将文件直接拖到这里
悬赏:
E币
网盘
* 网盘链接:
* 提取码:
悬赏:
E币

Markdown 语法

  • 加粗**内容**
  • 斜体*内容*
  • 删除线~~内容~~
  • 引用> 引用内容
  • 代码`代码`
  • 代码块```编程语言↵代码```
  • 链接[链接标题](url)
  • 无序列表- 内容
  • 有序列表1. 内容
  • 缩进内容
  • 图片![alt](url)
+ 添加网盘链接/附件

Markdown 语法

  • 加粗**内容**
  • 斜体*内容*
  • 删除线~~内容~~
  • 引用> 引用内容
  • 代码`代码`
  • 代码块```编程语言↵代码```
  • 链接[链接标题](url)
  • 无序列表- 内容
  • 有序列表1. 内容
  • 缩进内容
  • 图片![alt](url)
相关问答
无更多相似问答 去提问
举报反馈

举报类型

  • 内容涉黄/赌/毒
  • 内容侵权/抄袭
  • 政治相关
  • 涉嫌广告
  • 侮辱谩骂
  • 其他

详细说明

易百纳技术社区