1550
- 收藏
- 点赞
- 分享
- 举报
SONY高清摄像头FCB-CV7520A接入HI3531DV100出现的问题求助
本帖最后由 qn1555416325 于 2019-7-29 12:04 编辑
SONY高清摄像头FCB-CV7520A 通过 LVDS线 接入 THC63LVD104C 将信号转换为 YCrCb和时钟信号
将Y接入 Vi2,C接入Vi3,时钟接入VI2时钟
图像出来的这样子的,还闪烁,修改掩码后没有任何效果
VI参数
[code] stViDevAttr =
{
/*interface mode*/
VI_MODE_BT1120_STANDARD,
//VI_MODE_BT1120_INTERLEAVED,
/*work mode, 1/2/4 multiplex*/
VI_WORK_MODE_1Multiplex,
/* r_mask g_mask b_mask*/
{0xFF000000, 0xFF0000},
//{0xFF0000, 0xFF000000},
/* for single/double edge, must be set when double edge*/
VI_CLK_EDGE_SINGLE_UP,
/*AdChnId*/
{-1, -1, -1, -1},
/*enDataSeq, just support yuv*/
VI_INPUT_DATA_UVUV,
/*sync info*/
{
/*port_vsync port_vsync_neg port_hsync port_hsync_neg */
VI_VSYNC_PULSE, VI_VSYNC_NEG_HIGH, VI_HSYNC_VALID_SINGNAL,VI_HSYNC_NEG_HIGH,VI_VSYNC_NORM_PULSE,VI_VSYNC_VALID_NEG_HIGH,
/*timing info*/
/*hsync_hfb hsync_act hsync_hhb*/
{0, 1920, 0,
/*vsync0_vhb vsync0_act vsync0_hhb*/
0, 1080, 0,
/*vsync1_vhb vsync1_act vsync1_hhb*/
0, 0, 0}
},
/*whether use isp*/
VI_PATH_BYPASS,
/*data type*/
VI_DATA_TYPE_YUV,
/* Data reverse */
HI_FALSE
//HI_TRUE
};[/code]
cat /proc/umap/vi
[code]/home/admin # cat /proc/umap/vi
[VIU] Version: [Hi3531D_MPP_V1.0.4.0 B050 Release], Build Time: [May 30 2018, 17:51:46]
-----MODULE PARAM--------------------------------------------------------------
detect_err_frame drop_err_frame stop_int_level max_cas_gap min_cas_gap
10 0 0 28000 0
discard_int int_gap_time int_time vi_vb_source
0 45000 10000 0
-----VI DEV ATTR---------------------------------------------------------------
Dev IntfM WkM ComMsk0 ComMsk1 CLKM AD0 AD1 AD2 AD3 Seq DPath DType DRev bDllSlave
2 BT1120S 1Mux ff000000 ff0000 UP -1 -1 -1 -1 UVUV ByPass YUV N Y
-----VI HIGH DEV ATTR---------------------------------------------------------------
Dev InputM WkM ComMsk0 ComMsk1 AD0 AD1 AD2 AD3 Seq CombM CompM ClkM Fix FldP DPath DType DRev
-----VI PHYCHN ATTR------------------------------------------------------------
PhyChn CapX CapY CapW CapH DstW DstH CapSel ScanM SkipM Mirror Flip IntEn PixFom SrcRat DstRat SkipMEx SkipMExYMask SkipMExCMask
8 0 0 1920 1080 1920 1080 both P SKIPNON N N Y sp422 -1 -1 N 0x0 0xa
-----VI PHYCHN MINOR ATTR------------------------------------------------------------
PhyChn CapX CapY CapW CapH DstW DstH CapSel ScanM Mirror Flip PixFom MixCap DwScal SrcRat DstRat
-----VI PHYCHN STATUS 1----------------------------------------------------------
PhyChn BindDev Way IntCnt VbFail LosInt TopLos BotLos BufCnt IntT SendT Field Stride
8 2 0 3208 0 3 0 2 2 38 18 frm 1920
-----VI PHYCHN STATUS 2---------------------------------------------------------
PhyChn MaxIntT IntGapT MaxGapT OverCnt LIntCnt ThrCnt AutoDis CasAutD TmgErr ccErrN IntRat
8 49 33367 33395 0 0 1 0 0 0 1 29
-----VI PHYCHN VBI ATTR---------------------------------------------------------
PhyChn VbiId X Y Local Len CasErrN
-----VI CASCADE CHN ATTR---------------------------------------------------------
CasChn Dev PhyChn SrcRat DstRat
-----VI CHN ATTACH INFO---------------------------------------------------------
PhyChn Pool1 Pool2
8 -1 -1
-----VI CHN STATUS-------------------------------------------------------------
ViChn bEnUsrP FrmTime FrmRate SendCnt SwLost Depth Rotate
8 N 33367 30 3205 0 0 NONE
-----VI CHN CALL VGS STATUS 1-------------------------------------------------
ViChn UsrBgnNOk UsrCancel UsrEndOk UsrCbOk CvrBgnNOk CvrCancel CvrEndOk CvrCbOk
-----VI CHN CALL VGS STATUS 2-------------------------------------------------
ViChn OsdBgnNOk OsdCancel OsdEndOk OsdCbOk ScaleNOk SclCancel SclEndOk SclCbOk
[/code]
SONY高清摄像头FCB-CV7520A 通过 LVDS线 接入 THC63LVD104C 将信号转换为 YCrCb和时钟信号
将Y接入 Vi2,C接入Vi3,时钟接入VI2时钟
图像出来的这样子的,还闪烁,修改掩码后没有任何效果
VI参数
[code] stViDevAttr =
{
/*interface mode*/
VI_MODE_BT1120_STANDARD,
//VI_MODE_BT1120_INTERLEAVED,
/*work mode, 1/2/4 multiplex*/
VI_WORK_MODE_1Multiplex,
/* r_mask g_mask b_mask*/
{0xFF000000, 0xFF0000},
//{0xFF0000, 0xFF000000},
/* for single/double edge, must be set when double edge*/
VI_CLK_EDGE_SINGLE_UP,
/*AdChnId*/
{-1, -1, -1, -1},
/*enDataSeq, just support yuv*/
VI_INPUT_DATA_UVUV,
/*sync info*/
{
/*port_vsync port_vsync_neg port_hsync port_hsync_neg */
VI_VSYNC_PULSE, VI_VSYNC_NEG_HIGH, VI_HSYNC_VALID_SINGNAL,VI_HSYNC_NEG_HIGH,VI_VSYNC_NORM_PULSE,VI_VSYNC_VALID_NEG_HIGH,
/*timing info*/
/*hsync_hfb hsync_act hsync_hhb*/
{0, 1920, 0,
/*vsync0_vhb vsync0_act vsync0_hhb*/
0, 1080, 0,
/*vsync1_vhb vsync1_act vsync1_hhb*/
0, 0, 0}
},
/*whether use isp*/
VI_PATH_BYPASS,
/*data type*/
VI_DATA_TYPE_YUV,
/* Data reverse */
HI_FALSE
//HI_TRUE
};[/code]
cat /proc/umap/vi
[code]/home/admin # cat /proc/umap/vi
[VIU] Version: [Hi3531D_MPP_V1.0.4.0 B050 Release], Build Time: [May 30 2018, 17:51:46]
-----MODULE PARAM--------------------------------------------------------------
detect_err_frame drop_err_frame stop_int_level max_cas_gap min_cas_gap
10 0 0 28000 0
discard_int int_gap_time int_time vi_vb_source
0 45000 10000 0
-----VI DEV ATTR---------------------------------------------------------------
Dev IntfM WkM ComMsk0 ComMsk1 CLKM AD0 AD1 AD2 AD3 Seq DPath DType DRev bDllSlave
2 BT1120S 1Mux ff000000 ff0000 UP -1 -1 -1 -1 UVUV ByPass YUV N Y
-----VI HIGH DEV ATTR---------------------------------------------------------------
Dev InputM WkM ComMsk0 ComMsk1 AD0 AD1 AD2 AD3 Seq CombM CompM ClkM Fix FldP DPath DType DRev
-----VI PHYCHN ATTR------------------------------------------------------------
PhyChn CapX CapY CapW CapH DstW DstH CapSel ScanM SkipM Mirror Flip IntEn PixFom SrcRat DstRat SkipMEx SkipMExYMask SkipMExCMask
8 0 0 1920 1080 1920 1080 both P SKIPNON N N Y sp422 -1 -1 N 0x0 0xa
-----VI PHYCHN MINOR ATTR------------------------------------------------------------
PhyChn CapX CapY CapW CapH DstW DstH CapSel ScanM Mirror Flip PixFom MixCap DwScal SrcRat DstRat
-----VI PHYCHN STATUS 1----------------------------------------------------------
PhyChn BindDev Way IntCnt VbFail LosInt TopLos BotLos BufCnt IntT SendT Field Stride
8 2 0 3208 0 3 0 2 2 38 18 frm 1920
-----VI PHYCHN STATUS 2---------------------------------------------------------
PhyChn MaxIntT IntGapT MaxGapT OverCnt LIntCnt ThrCnt AutoDis CasAutD TmgErr ccErrN IntRat
8 49 33367 33395 0 0 1 0 0 0 1 29
-----VI PHYCHN VBI ATTR---------------------------------------------------------
PhyChn VbiId X Y Local Len CasErrN
-----VI CASCADE CHN ATTR---------------------------------------------------------
CasChn Dev PhyChn SrcRat DstRat
-----VI CHN ATTACH INFO---------------------------------------------------------
PhyChn Pool1 Pool2
8 -1 -1
-----VI CHN STATUS-------------------------------------------------------------
ViChn bEnUsrP FrmTime FrmRate SendCnt SwLost Depth Rotate
8 N 33367 30 3205 0 0 NONE
-----VI CHN CALL VGS STATUS 1-------------------------------------------------
ViChn UsrBgnNOk UsrCancel UsrEndOk UsrCbOk CvrBgnNOk CvrCancel CvrEndOk CvrCbOk
-----VI CHN CALL VGS STATUS 2-------------------------------------------------
ViChn OsdBgnNOk OsdCancel OsdEndOk OsdCbOk ScaleNOk SclCancel SclEndOk SclCbOk
[/code]
我来回答
回答2个
时间排序
认可量排序
认可0
认可0
或将文件直接拖到这里
悬赏:
E币
网盘
* 网盘链接:
* 提取码:
悬赏:
E币
Markdown 语法
- 加粗**内容**
- 斜体*内容*
- 删除线~~内容~~
- 引用> 引用内容
- 代码`代码`
- 代码块```编程语言↵代码```
- 链接[链接标题](url)
- 无序列表- 内容
- 有序列表1. 内容
- 缩进内容
- 图片![alt](url)
相关问答
-
2016-11-17 10:51:40
-
2019-04-18 14:26:02
-
2023-12-25 10:12:10
-
2015-04-29 11:37:38
-
2020-04-17 09:40:46
-
2021-08-21 13:04:24
-
2023-02-11 10:39:52
-
2020-03-13 19:50:27
-
2015-11-17 22:24:30
-
2024-01-16 20:59:11
-
2017-09-15 18:13:33
-
2021-01-14 17:36:49
-
22013-11-15 10:10:04
-
2019-01-03 16:31:43
-
2019-01-03 16:27:35
-
2018-02-01 12:59:50
-
2020-04-22 15:16:21
-
2019-10-09 11:10:36
-
2019-03-20 14:29:26
无更多相似问答 去提问
点击登录
-- 积分
-- E币
提问
—
收益
—
被采纳
—
我要提问
切换马甲
上一页
下一页
悬赏问答
-
5Hi3516CV610 如何使用SD卡升级固件
-
5cat /dev/logmpp 报错 <3>[ vi] [func]:vi_send_frame_node [line]:99 [info]:vi pic queue is full!
-
50如何获取vpss chn的图像修改后发送至vo
-
5FPGA通过Bt1120传YUV422数据过来,vi接收不到数据——3516dv500
-
50SS928 运行PQtools 拼接 推到设备里有一半画面会异常
-
53536AV100的sample_vdec输出到CVBS显示
-
10海思板子mpp怎么在vi阶段改变视频数据尺寸
-
10HI3559AV100 多摄像头同步模式
-
9海思ss928单路摄像头vio中加入opencv处理并显示
-
10EB-RV1126-BC-191板子运行自己编码的程序
举报反馈
举报类型
- 内容涉黄/赌/毒
- 内容侵权/抄袭
- 政治相关
- 涉嫌广告
- 侮辱谩骂
- 其他
详细说明
提醒
你的问题还没有最佳答案,是否结题,结题后将扣除20%的悬赏金
取消
确认
提醒
你的问题还没有最佳答案,是否结题,结题后将根据回答情况扣除相应悬赏金(1回答=1E币)
取消
确认