1205
- 收藏
- 点赞
- 分享
- 举报
ISO_20462 Psychophysical experimental methods for estimating image quality
The ISO 20462 method for subjective image quality evaluation relies on a set of reference images, which are calibrated in terms of known absolute quality differences. The original reference images, Standard Reference Stimuli (SRS), were in the form of photographic prints, to be viewed under controlled lighting and fixed viewing conditions. This method was then extended for scenes presented on computer monitors as Digital Reference Stimuli (DRS). This softcopy ruler method was developed as part of the Camera Phone Image Quality ( CPIQ) Initiative and has now been adopted as an updated ISO 20462 method (ISO 20462-3:2012). This extended method of using the softcopy rulers was validated by CPIQ using two systems of laboratory lighting and display. That effort, while successful, required significant effort and resources to accomplish. Chief among these was gathering a sufficient number of qualified viewers who could commit to viewing images on a narrowly defined schedule at a limited number of laboratories. In our study, we investigate whether and to what extent the ISO 20462 softcopy ruler method can be adapted to Internet-based subjective evaluations. Our objective is to develop and test a method that uses a commercial online survey service. We describe several limitations to be overcome, including image file size, and a static interface rather than one allowing dynamic updating of the reference image. The method that we developed and tested uses reference anchor images rather than the slider-selected reference. However, our anchors were drawn from the ISO 20462 set, and therefore were taken as calibrated reference images, albeit viewed under uncontrolled conditions. We describe the verification study that was completed using Survey Monkey? and compare results with the corresponding Softcopy Ruler data. Similar results were obtained for observer ratings and their scene-dependency. We conclude that crowdsourcing is useful, particularly when common nonlaboratory image viewing is the intent. When calibrated subjective image quality measures are needed, our adapted method should be considered an efficient alternative to the ISO 20462 standard, provided that common reference images are used.

下载
我来回答
回答0个
时间排序
认可量排序

或将文件直接拖到这里
悬赏:
E币
网盘
* 网盘链接:
* 提取码:
悬赏:
E币
Markdown 语法
- 加粗**内容**
- 斜体*内容*
- 删除线~~内容~~
- 引用> 引用内容
- 代码`代码`
- 代码块```编程语言↵代码```
- 链接[链接标题](url)
- 无序列表- 内容
- 有序列表1. 内容
- 缩进内容
- 图片
相关问答
-
2016-11-09 13:55:27
-
2012-12-04 11:29:50
-
2016-11-01 23:09:33
-
2019-07-21 17:37:05
-
2023-08-22 15:05:47
-
2018-08-13 11:32:58
-
2020-08-29 10:22:31
-
2019-07-21 17:35:16
-
2019-07-21 17:34:15
-
2019-01-08 14:01:21
-
2017-03-03 00:50:16
-
2018-12-10 10:44:16
-
2018-03-11 12:33:21
-
2018-12-06 09:52:18
-
2016-06-28 11:35:07
-
2021-01-03 19:40:51
-
2016-08-09 10:24:06
-
2018-09-05 10:48:50
-
2018-11-16 16:57:43
无更多相似问答 去提问

点击登录
-- 积分
-- E币
提问
—
收益
—
被采纳
—
我要提问
切换马甲
上一页
下一页
悬赏问答
-
10海思3559的VGS模块在VI上画线问题
-
53519dv500接lvds的sensor mn34120,图像出现很多竖线,sensor板接以前的3519v101没问题
-
103403外接hdmi口1024*600显示屏报错
-
5SS928点DC camera的6946,全屏紫色
-
5hi3519 的 网络传输的MTU值可以修改到比1500大嘛?
-
10WS73V100星闪扫描不到设备sle
-
5SS928/SD3403 录像失败 venc stream time out, exit thread; venc 2 stream buffer is full
-
10Hi3516DV500无法运行PQTool软件
-
10君正T23+1084带TF卡插卡(给该主板适配TF卡驱动,电机驱动,适配GPIO)
-
5Hi3536A从vpss获取1080分辨率的yuv数据异常
举报反馈
举报类型
- 内容涉黄/赌/毒
- 内容侵权/抄袭
- 政治相关
- 涉嫌广告
- 侮辱谩骂
- 其他
详细说明
提醒
你的问题还没有最佳答案,是否结题,结题后将扣除20%的悬赏金
取消
确认
提醒
你的问题还没有最佳答案,是否结题,结题后将根据回答情况扣除相应悬赏金(1回答=1E币)
取消
确认