1783
- 收藏
- 点赞
- 分享
- 举报
海思hi3536c 雄迈的板子内核起来后网卡PING不通
海思hi3536c 雄迈的板子内核起来后网卡PING不通,看内核网卡驱动是好的,但是死活就是PING不通,有没有大神遇到过的,是怎样解决的啊,恳请赐教啰。以下是内核相关打印信息:
libphy: Fixed MDIO Bus: probed
libphy: hisi_gemac_mii_bus: probed
ata1: SATA link down (SStatus 0 SControl 300)
libphy: hisi_gemac_mii_bus: probed
hi_gmac_v200 100a0000.ethernet (unnamed net_device) (uninitialized): using random MAC address 46:8c:e0:c6:3a:1c
ata2: SATA link down (SStatus 0 SControl 300)
attached PHY 2 to driver Atheros 8035 ethernet, PHY_ID=0x4dd072
Higmac dma_sg_phy: 0x83ac0000
ETH: rgmii, phy_addr=2
hi_gmac_v200 100a1000.ethernet (unnamed net_device) (uninitialized): using random MAC address e2:96:7b:68:79:10
attached PHY 3 to driver Generic PHY, PHY_ID=0xffff
Higmac dma_sg_phy: 0x83b40000
ETH: rgmii, phy_addr=3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
下面是我PING命令的打印:
~ # hi_gmac_v200 100a0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
~ # ping 10.11.49.210
PING 10.11.49.210 (10.11.49.210): 56 data bytes
--- 10.11.49.210 ping statistics ---
9 packets transmitted, 0 packets received, 100% packet loss
~ # ping 10.11.49.210
PING 10.11.49.210 (10.11.49.210): 56 data bytes
--- 10.11.49.210 ping statistics ---
4 packets transmitted, 0 packets received, 100% packet loss
~ # ifconfig
eth0 Link encap:Ethernet HWaddr 12:1C:42:0A:24:73
inet addr:10.11.49.111 Bcast:10.255.255.255 Mask:255.0.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:191 errors:0 dropped:0 overruns:0 frame:0
TX packets:15 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:11748 (11.4 KiB) TX bytes:630 (630.0 B)
Interrupt:48
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:75 errors:0 dropped:0 overruns:0 frame:0
TX packets:75 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:8400 (8.2 KiB) TX bytes:8400 (8.2 KiB)
~ #
libphy: Fixed MDIO Bus: probed
libphy: hisi_gemac_mii_bus: probed
ata1: SATA link down (SStatus 0 SControl 300)
libphy: hisi_gemac_mii_bus: probed
hi_gmac_v200 100a0000.ethernet (unnamed net_device) (uninitialized): using random MAC address 46:8c:e0:c6:3a:1c
ata2: SATA link down (SStatus 0 SControl 300)
attached PHY 2 to driver Atheros 8035 ethernet, PHY_ID=0x4dd072
Higmac dma_sg_phy: 0x83ac0000
ETH: rgmii, phy_addr=2
hi_gmac_v200 100a1000.ethernet (unnamed net_device) (uninitialized): using random MAC address e2:96:7b:68:79:10
attached PHY 3 to driver Generic PHY, PHY_ID=0xffff
Higmac dma_sg_phy: 0x83b40000
ETH: rgmii, phy_addr=3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
下面是我PING命令的打印:
~ # hi_gmac_v200 100a0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
~ # ping 10.11.49.210
PING 10.11.49.210 (10.11.49.210): 56 data bytes
--- 10.11.49.210 ping statistics ---
9 packets transmitted, 0 packets received, 100% packet loss
~ # ping 10.11.49.210
PING 10.11.49.210 (10.11.49.210): 56 data bytes
--- 10.11.49.210 ping statistics ---
4 packets transmitted, 0 packets received, 100% packet loss
~ # ifconfig
eth0 Link encap:Ethernet HWaddr 12:1C:42:0A:24:73
inet addr:10.11.49.111 Bcast:10.255.255.255 Mask:255.0.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:191 errors:0 dropped:0 overruns:0 frame:0
TX packets:15 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:11748 (11.4 KiB) TX bytes:630 (630.0 B)
Interrupt:48
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:75 errors:0 dropped:0 overruns:0 frame:0
TX packets:75 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:8400 (8.2 KiB) TX bytes:8400 (8.2 KiB)
~ #
我来回答
回答2个
时间排序
认可量排序
认可0
认可0
或将文件直接拖到这里
悬赏:
E币
网盘
* 网盘链接:
* 提取码:
悬赏:
E币
Markdown 语法
- 加粗**内容**
- 斜体*内容*
- 删除线~~内容~~
- 引用> 引用内容
- 代码`代码`
- 代码块```编程语言↵代码```
- 链接[链接标题](url)
- 无序列表- 内容
- 有序列表1. 内容
- 缩进内容
- 图片![alt](url)
相关问答
-
2018-05-11 10:13:42
-
2019-04-24 18:05:16
-
2017-05-24 16:34:19
-
2017-10-17 16:48:21
-
2016-03-22 10:21:21
-
2017-09-17 20:42:35
-
2013-08-22 16:25:09
-
2019-03-30 09:13:26
-
2020-04-23 18:20:20
-
2024-02-24 22:35:10
-
2014-01-14 15:09:09
-
2020-02-29 18:32:04
-
2017-11-01 11:51:15
-
2016-08-31 11:59:07
-
2017-07-17 20:50:47
-
2015-04-25 09:18:14
-
42015-09-29 14:32:18
-
2018-11-07 17:19:59
-
2019-12-09 16:21:53
无更多相似问答 去提问
点击登录
-- 积分
-- E币
提问
—
收益
—
被采纳
—
我要提问
切换马甲
上一页
下一页
悬赏问答
-
5Hi3516CV610 如何使用SD卡升级固件
-
5cat /dev/logmpp 报错 <3>[ vi] [func]:vi_send_frame_node [line]:99 [info]:vi pic queue is full!
-
50如何获取vpss chn的图像修改后发送至vo
-
5FPGA通过Bt1120传YUV422数据过来,vi接收不到数据——3516dv500
-
50SS928 运行PQtools 拼接 推到设备里有一半画面会异常
-
53536AV100的sample_vdec输出到CVBS显示
-
10海思板子mpp怎么在vi阶段改变视频数据尺寸
-
10HI3559AV100 多摄像头同步模式
-
9海思ss928单路摄像头vio中加入opencv处理并显示
-
10EB-RV1126-BC-191板子运行自己编码的程序
举报反馈
举报类型
- 内容涉黄/赌/毒
- 内容侵权/抄袭
- 政治相关
- 涉嫌广告
- 侮辱谩骂
- 其他
详细说明
提醒
你的问题还没有最佳答案,是否结题,结题后将扣除20%的悬赏金
取消
确认
提醒
你的问题还没有最佳答案,是否结题,结题后将根据回答情况扣除相应悬赏金(1回答=1E币)
取消
确认