wed112

wed112

1个粉丝

3

问答

0

专栏

0

资料

wed112  发布于  2017-10-13 10:54:10
采纳率 0%
3个问答
23685

hi3798mv200使用hitool工具无法下载fastboot

 
使用hitool工具无法下载fastboot
芯片是 hi3798mv200
提示无法下载fastboot

版本是我自己编译的,
我来回答
回答12个
时间排序
认可量排序

wed112

1个粉丝

3

问答

0

专栏

0

资料

wed112 2017-10-13 11:01:01
认可0
串口已经连接,请给单板上电,若已经上电,请断电后重新上电。
No error in nativeavailable
发送数据帧失败,请检查串口连接是否正常。
Failed to download fastboot!
Platform Version: 4.0.4
HiBurn Version: 5.0.6
HiSilicon Technologies Co., Ltd. All rights reserved. (C) 2011-2014
Mod: Hi3798MV200


Platform Version: 4.0.4
HiBurn Version: 5.0.6
HiSilicon Technologies Co., Ltd. All rights reserved. (C) 2011-2014
Mod: Hi3798MV200



串口已经连接,请给单板上电,若已经上电,请断电后重新上电。

Bootrom start
Boot Media: eMMC
Decrypt auxiliary code ...OK

lsadc voltage min: 000002E3, max: 000002EC, aver: 000002E9, index: 00000001

Enter boot auxiliary code

Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Oct 20 2016 - 16:58:13

Reg Version:  v1.5.0\
Reg Time:     2016/11/25 18:04:25
Reg Name:     hi3798mv2dmb_hi3798mv200_DDR4-2133_2GB_16bitx2_2layers.reg
DDRS
Boot auxiliary code success
Bootrom success


System startup


Relocate Boot

Jump to C code


Fastboot 3.3.0 (sscwl@wangYS) (Feb 23 2017 - 14:15:35)

Fastboot:      Version 3.3.0
Build Date:    Feb 23 2017, 14:16:58
CPU:           Hi3798Mv200
Boot Media:    eMMC
DDR Size:      2GB

Found flash memory controller hifmc100.
no found nand device.


MMC/SD controller initialization.
MMC/SD Card:
    MID:         0x11
    Read Block:  512 Bytes
    Write Block: 512 Bytes
    Chip Size:   7456M Bytes (High Capacity)
    Name:        "008G30"
    Chip Type:   MMC
    Version:     5.1
    Speed:       52000000Hz
    Mode:        DDR50
    Voltage:     1.8V
    Bus Width:   8bit
    Boot Addr:   0 Bytes
Net:   eth0 phymdio(31) invalid, use default:0
upWarning: failed to set MAC address
, gmac0Warning: failed to set MAC address


Boot Env on eMMC
    Env Offset:          0x00100000
    Env Size:            0x00010000
    Env Range:           0x00010000


SDK Version: HiSTBAndroidV600R003C01SPC010_v2016121214

get chipid =37986200
get chipType (HI3798MV200)
count=2
mac:A6:BD:5E:78:1D:22
Reserve Memory
    Start Addr:          0x7FFFE000
    Bound Addr:          0x8D7A000
    Free  Addr:          0x7ED94000
    Alloc Block:  Addr         Size
                  0x7FBFD000   0x400000
                  0x7F8FC000   0x300000
                  0x7F87B000   0x80000
                  0x7F878000   0x2000
                  0x7F725000   0x152000
                  0x7F71B000   0x9000
                  0x7EF31000   0x7E9000
                  0x7EF2D000   0x3000
                  0x7ED97000   0x195000
                  0x7ED94000   0x2000

Press Ctrl+C to stop autoboot

MMC read: dev # 0, block # 307200, count 20480 ... 20480 blocks read: OK

88315515 Bytes/s

Found Initrd at 0x04000000 (Size 327719 Bytes), align at 16384 Bytes

## Booting kernel from Legacy Image at 01ffffc0 ...
   Image Name:   Linux-3.18.24_hi3798mv2x
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    8869433 Bytes = 8.5 MiB
   Load Address: 02000000
   Entry Point:  02000000
   XIP Kernel Image ... OK
OK
ATAGS [0x00000100 - 0x0000049C], 924Bytes

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.18.24_hi3798mv2x (sscwl@wangYS) (gcc version 4.9.2 20140904 (prerelease) (gcc-4.9.2 + glibc-2.22 (Build by czyong) Wed Mar 9 16:30:48 CST 2016) ) #2 SMP Thu Feb 23 14:14:59 CST 2017
CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
initmrd: found no initmrd.
Machine model: Hisilicon
cma: Reserved 48 MiB at 0x7bc00000
cma: Reserved 4 MiB at 0x7fc00000
Memory policy: Data cache writealloc
DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
PERCPU: Embedded 10 pages/cpu @de3bf000 s11328 r8192 d21440 u40960
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523288
Kernel command line: console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastboot),1M(bootargs),10M(recovery),2M(deviceinfo),8M(baseparam),8M(pqparam),20M(logo),20M(logobak),40M(fastplay),40M(fastplaybak),40M(kernel),20M(misc),8M(userapi),8M(hibdrv),8M(qbflag),300M(qbdata),800M(backup),800M(system),500M(cache),50M(private),-(userdata) initrd=0x4000000,0x50027 mem=2G mmz=ddr,0,0,48M
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 12288 bytes
log_buf_len min size: 16384 bytes
log_buf_len: 32768 bytes
early log buf free: 14092(86%)
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 1992820K/2097152K available (13527K kernel code, 1788K rwdata, 4324K rodata, 611K init, 3161K bss, 104332K reserved, 1521644K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
    lowmem  : 0xc0000000 - 0xdf400000   ( 500 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc11770e4   (17853 kB)
      .init : 0xc1178000 - 0xc1210c40   ( 612 kB)
      .data : 0xc1212000 - 0xc13d1274   (1789 kB)
       .bss : 0xc13d1274 - 0xc16e76cc   (3162 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:352
Architected cp15 timer(s) running at 24.00MHz (phys).
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
Switching to timer-based delay loop, resolution 41ns
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
ftrace: allocating 45014 entries in 133 pages
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0xc3fc60 - 0xc3fcb8
CPU: hi3798mv200
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated (192.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
Serial: AMBA PL011 UART driver
f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000 (irq = 81, base_baud = 0) is a PL011 rev2
console [ttyAMA0] enabled
f8b02000.uart: ttyAMA1 at MMIO 0xf8b02000 (irq = 83, base_baud = 0) is a PL011 rev2
f8b03000.uart: ttyAMA2 at MMIO 0xf8b03000 (irq = 84, base_baud = 0) is a PL011 rev2
pl061_gpio gpio0: PL061 GPIO chip @0xf8b20000 registered
pl061_gpio gpio1: PL061 GPIO chip @0xf8b21000 registered
pl061_gpio gpio2: PL061 GPIO chip @0xf8b22000 registered
pl061_gpio gpio3: PL061 GPIO chip @0xf8b23000 registered
pl061_gpio gpio4: PL061 GPIO chip @0xf8b24000 registered
pl061_gpio gpio5: PL061 GPIO chip @0xf8004000 registered
pl061_gpio gpio6: PL061 GPIO chip @0xf8b26000 registered
pl061_gpio gpio7: PL061 GPIO chip @0xf8b27000 registered
pl061_gpio gpio8: PL061 GPIO chip @0xf8b28000 registered
pl061_gpio gpio9: PL061 GPIO chip @0xf8b29000 registered
hisilicon-pcie: probe of f0001000.pcie failed with error -1
vgaarb: loaded
SCSI subsystem initialized
ssp-pl022 f8b1a000.spi: ARM PL022 driver, device ID: 0x00041022
ssp-pl022 f8b1a000.spi: mapped registers from 0xf8b1a000 to f9b1a000
spi_master spi0: will run message pump with realtime priority
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
hisi_iommu_ptable_addr:phy 0x1d000000    size:0x400000
hisi_iommu_err_rdaddr :phy 0x1dfbc400    size:0x200
hisi_iommu_err_wraddr :phy 0x1dfbc600     size:0x200
in hisi_iommu_domain_init start
in hisi_iommu_domain_init end
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
[00:00:00:299 ERROR-Invalid]:DispAddIntf[674]:DISP 1 acquire  (0) failed
[00:00:00:443 ERROR-Invalid]:MCE_Init[2232]:ERR: get PDM Param
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 324K (c4000000 - c4051000)
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.541:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2. (NAND)  2001-2006 Red Hat, Inc.
fuse init (API version 7.23)
msgmni has been set to 920
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
brd: module loaded
loop: module loaded
zram: Created 1 device(s) ...
hifmc100: registerd new interface driver hifmc100.
hifmc100: Found flash memory controller hifmc100.
hifmc100: no found spi-nor device.
hifmc100: no found nand device.
hifmc100: no found spi-nand device.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email]maxk@qualcomm.com[/email]>
FEPHY:addr=2, la_am=0xe, ldo_am=0x3, r_tuning=0x16
libphy: himii: probed
hieth: attached port 0 PHY 2 to driver Generic PHY
platform f9840000.ethernet: Driver hi_gmac_v200 requests probe deferral
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver option
usbserial: USB Serial support registered for GSM modem (1-port)
hiudc: version 3.00a 10-AUG-2012
Core Release: 3.10a
Setting default values for core params
Using Buffer DMA mode
Dedicated Tx FIFOs mode
file system registered
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
sp805-wdt f8a2c000.watchdog: registration successful
device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: [email]dm-devel@redhat.com[/email]
registered new interface driver himciv200
mmc0: BKOPS_EN bit is not set
mmc0: new DDR MMC card at address 0001
mmcblk0: mmc0:0001 008G30 7.28 GiB
mmcblk0boot0: mmc0:0001 008G30 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 008G30 partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 008G30 partition 3 4.00 MiB
mmcblk0: p1(fastboot) p2(bootargs) p3(recovery) p4(deviceinfo) p5(baseparam) p6(pqparam) p7(logo) p8(logobak) p9(fastplay) p10(fastplaybak) p11(kernel) p12(misc) p13(userapi) p14(hibdrv) p15(qbflag) p16(qbdata) p17(backup) p18(system) p19(cache) p20(private) p21(userdata)
f9820000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
f9c40000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
hiahci-phy: registered new sata phy driver
input: Hi keyboard as /devices/virtual/input/input0
input: Hi mouse as /devices/virtual/input/input1
input: qwerty as /devices/virtual/input/input2
Hi Android vinput driver init successful!
hiotg: registered new interface otg driver
Registering sdcardfs 2.1.3
SVB: type = 3, core vmin 910mv
Mali: Mali device driver loaded
usbcore: registered new interface driver snd-usb-audio
oprofile: hardware counters not available
oprofile: using timer interrupt.
GACT probability on
Mirror/redirect action on
Simple TC action Loaded
netem: version 1.3
u32 classifier
    Performance counters on
    input device check on
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
IPVS: Registered protocols ()
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: Creating netns size=792 id=0
IPVS: ipvs loaded.
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP: cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
8021q: 802.1Q VLAN Support v1.8
lib80211: common routines for IEEE802.11 drivers
Registering SWP/SWPB emulation handler
libphy: higmac_mii_bus: probed
sec os HAL_Cipher_EnableMmu...
hisi-sndcard hisi-sndcard: aiao-hifi <-> hisi-i2s mapping ok
ALSA device list:
  #0: HISI-AIAO
reeing unused kernel memory: 608K (c1178000 - c1210000)
^_^A^O^@^@^@^@^@` init: /init.bigfish.rc: 78: invalid option 'sdcard_r'
init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p21): recovery complete
EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p19): recovery complete
EXT4-fs (mmcblk0p19): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p20): recovery complete
EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: (null)
init: /dev/hw_random not found
healthd: wakealarm_init: timerfd_create failed
init: cannot find '/system/bin/rild', disabling 'ril-daemon'
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: cannot find '/system/bin/frontPanel', disabling 'frontPanel'
init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'
init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'
sdcardfs: version 2.1.3
sdcardfs: dev_name -> /data/media
sdcardfs: options -> fsuid=1023,fsgid=1023,mask=0,userid=0,gid=1015,derive=legacy,reserved_mb=20
sdcardfs: mounted on top of /data/media type ext4
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
read descriptors
read strings
g_ffs gadget: g_ffs ready
ealthd: No charger supplies found
healthd: BatteryStatusPath not found
healthd: BatteryHealthPath not found
healthd: BatteryPresentPath not found
healthd: BatteryCapacityPath not found
healthd: BatteryVoltagePath not found
^@^A^@^@healthd: BatteryTemperaturePath not found
^@^@^@` healthd: BatteryTechnologyPath not found
^@^A@^@^@^@` @^@^@^@` @^@^@^@` ^@^@^@` root@Hi3798MV200:/ # ^D
random: init urandom read with 24 bits of entropy available
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready


Welcome to HiAndroid


ehci-platform: EHCI generic platform driver
ehci-platform f9890000.ehci: EHCI Host Controller
ehci-platform f9890000.ehci: new USB bus registered, assigned bus number 1
ehci-platform f9890000.ehci: irq 98, io mem 0xf9890000
ehci-platform f9890000.ehci: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
ohci-platform f9880000.ohci: Generic Platform OHCI controller
ohci-platform f9880000.ohci: new USB bus registered, assigned bus number 2
ohci-platform f9880000.ohci: irq 99, io mem 0xf9880000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci-hcd f98a0000.xhci: xHCI Host Controller
xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 3
xhci-hcd f98a0000.xhci: irq 101, io mem 0xf98a0000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd f98a0000.xhci: xHCI Host Controller
xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
tntfs: module license 'Commercial. For support email [email]ntfs-support@tuxera.com[/email].' taints kernel.
Disabling lock debugging due to kernel taint
Tuxera NTFS driver 3015.10.14 [Flags: R/W MODULE].
rtk_btusb: Realtek Bluetooth USB driver module init, version 4.0.2
rtk_btusb: Register usb char device interface for BT driver
usbcore: registered new interface driver rtk_btusb
[btmtk_info] btmtk_usb_init: btmtk usb driver ver 6.0.16101902
[btmtk_info] btmtk_usb_BT_init: begin
[btmtk_err] btmtk_usb_BT_init: devID 116391936, devIDfwlog 117440513
[btmtk_info] btmtk_usb_set_state: UNKNOWN(0) -> INIT(1)
[btmtk_info] btmtk_usb_BT_init: major number: 111
[btmtk_info] btmtk_usb_BT_init: BT_majorfwlog number: 112
[btmtk_info] btmtk_usb_BT_init: BT_chrdev driver(major 111) installed.
[btmtk_info] btmtk_usb_BT_init: BT_chrdevfwlog driver(major 112) installed.
[btmtk_err] btmtk_usb_BT_init: BT_major 111, BT_majorfwlog 112
[btmtk_err] btmtk_usb_BT_init: devID 116391936, devIDfwlog 117440513
[btmtk_info] btmtk_fops_set_state: UNKNOWN(0) -> INIT(1)
[btmtk_warn] btmtk_usb_BT_init: No Exported Func Found [RegisterPdwncCallback], just skip!
[btmtk_warn] btmtk_usb_BT_init: No Exported Func Found [RegisterLateResumeNotification], just skip!
[btmtk_info] btmtk_usb_allocate_memory: Success
[btmtk_info] btmtk_usb_set_state: INIT(1) -> DISCONNECT(2)
[btmtk_info] btmtk_usb_BT_init: end
usbcore: registered new interface driver btmtk_usb
usb 1-2: new high-speed USB device number 2 using ehci-platform
init: sys_prop: permission denied uid:1000  name:ro.config.gfx2d_compose
init: sys_prop: permission denied uid:1002  name:persist.bt.fwdump
ahci: probe of f9900000.hiahci failed with error -1
lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
lowmemorykiller: oom_adj 0 => oom_score_adj 0
lowmemorykiller: oom_adj 1 => oom_score_adj 58
lowmemorykiller: oom_adj 2 => oom_score_adj 117
lowmemorykiller: oom_adj 3 => oom_score_adj 176
lowmemorykiller: oom_adj 9 => oom_score_adj 529
lowmemorykiller: oom_adj 15 => oom_score_adj 1000
cfg80211: Calling CRDA to update world regulatory domain
random: nonblocking pool is initialized
RTL871X: module init start
RTL871X: rtl8188fu v4.3.23_17926.20160531_beta
RTL871X: build time: Feb 23 2017 11:26:54
RTL871X: hal_com_config_channel_plan chplan:0x20
RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=18:99:f5:b2:e3:87
RTL871X: rtw_ndev_init(p2p0) if2 mac_addr=1a:99:f5:b2:e3:87
usbcore: registered new interface driver rtl8188fu
RTL871X: module init ret=0
^@^@^@^@` root@Hi3798MV200:/ #
^@^@^@^@` root@Hi3798MV200:/ #
root@Hi3798MV200:/ # ` `
root@Hi3798MV200:/ # ` `
root@Hi3798MV200:/ # ` ` capability: warning: `wpa_supplicant' uses 32-bit capabilities (legacy support in use)
` ` ~`~~ `~~ `~~ ^D
> `
/system/bin/sh: /data: can't execute: Is a directory
126|root@Hi3798MV200:/ # 126|root@Hi3798MV200:/ #                                                       `
130|root@Hi3798MV200:/ # ` `
130|root@Hi3798MV200:/ # ` `
130|root@Hi3798MV200:/ # `
130|root@Hi3798MV200:/ # `
130|root@Hi3798MV200:/ # ` ` ^D
IPv6: ADDRCONF(NETDEV_UP): p2p0: link is not ready

Bootrom start
Boot Media: eMMC
#nack error
#failed to send the data frame

failed to send the head data
Failed to download fastboot!

wed112

1个粉丝

3

问答

0

专栏

0

资料

wed112 2017-10-13 11:11:28
认可0

wed112

1个粉丝

3

问答

0

专栏

0

资料

wed112 2017-10-13 13:09:39
认可0
编译fastboot依赖于device/hisilicon/Hi3798CV200/BoardConfig.mk中定义的sdk配置文

fastboot镜像除fastboot本身功能外,还与分区表,bootargs分区镜像相关,如其中
一个更新,则需要对应更新其他的镜像

wed112

1个粉丝

3

问答

0

专栏

0

资料

wed112 2017-10-16 14:20:55
认可0
有没有人啊。。等了好久

wed112

1个粉丝

3

问答

0

专栏

0

资料

wed112 2017-10-17 11:08:46
认可0


此报错原因可能有以下两种:

l   烧写的Fastboot镜像与当前单板型号不匹配导致,请直接查看单板标记型号或通过串口查看当前单板型号,如图10-10所示,其中” CPU”后标注即为当前单板型号,明确单板型号后,请使用匹配当前芯片的SDK镜像重新进行烧写;

l   单板DDR有问题,无法正常进行DDR初始化操作。

通过串口查看单板型号
Fastboot:      Version 3.3.0
Build Date:    Feb 23 2017, 14:16:58
CPU:           Hi3798Mv200
Boot Media:    eMMC
DDR Size:      2GB

上面的fastboot显示
Reg Version:  v1.5.0\
Reg Time:     2016/11/25 18:04:25
Reg Name:     hi3798mv2dmb_hi3798mv200_DDR4-2133_2GB_16bitx2_2layers.reg

用16进查看我的fast.bin文件也是有  hi3798mv2dmb_hi3798mv200_DDR4-2133_2GB_16bitx2_2layers.reg 文件的。

helphel

0个粉丝

4

问答

0

专栏

0

资料

helphel 2017-10-17 11:35:34
认可0
这颗用的人少,还是找找原厂技术支持吧。

wed112

1个粉丝

3

问答

0

专栏

0

资料

wed112 2017-10-17 11:50:05
认可0
[quote][url=forum.php?mod=redirect&goto=findpost&pid=79518&ptid=37960]helphel 发表于 2017-10-17 11:35[/url]
这颗用的人少,还是找找原厂技术支持吧。[/quote]

过两天才能找到人,这效率,太慢了

wed112

1个粉丝

3

问答

0

专栏

0

资料

wed112 2017-10-17 15:42:31
认可0
有没有可能是USB 转串口线的问题?  明天买的2根线,试试。

wed112

1个粉丝

3

问答

0

专栏

0

资料

wed112 2017-10-18 14:59:47
认可0
换线之后,可以下载了。真的是串口线的问题,坑啊。。

zhuxulin

0个粉丝

1

问答

0

专栏

0

资料

zhuxulin 2017-11-16 20:21:30
认可0
我的直接提示没有没有fastboot

zhuxulin

0个粉丝

1

问答

0

专栏

0

资料

zhuxulin 2017-11-16 20:35:08
认可0
我的把fastboot搞丢了,有谁会烧写么

cattleman

1个粉丝

19

问答

0

专栏

0

资料

cattleman 2019-05-23 18:58:01
认可0
楼主,试过HISI3798MV200 的bootloader 升级么?
或将文件直接拖到这里
悬赏:
E币
网盘
* 网盘链接:
* 提取码:
悬赏:
E币

Markdown 语法

  • 加粗**内容**
  • 斜体*内容*
  • 删除线~~内容~~
  • 引用> 引用内容
  • 代码`代码`
  • 代码块```编程语言↵代码```
  • 链接[链接标题](url)
  • 无序列表- 内容
  • 有序列表1. 内容
  • 缩进内容
  • 图片![alt](url)
+ 添加网盘链接/附件

Markdown 语法

  • 加粗**内容**
  • 斜体*内容*
  • 删除线~~内容~~
  • 引用> 引用内容
  • 代码`代码`
  • 代码块```编程语言↵代码```
  • 链接[链接标题](url)
  • 无序列表- 内容
  • 有序列表1. 内容
  • 缩进内容
  • 图片![alt](url)
相关问答
无更多相似问答 去提问
举报反馈

举报类型

  • 内容涉黄/赌/毒
  • 内容侵权/抄袭
  • 政治相关
  • 涉嫌广告
  • 侮辱谩骂
  • 其他

详细说明

易百纳技术社区