2139
- 收藏
- 点赞
- 分享
- 举报
HI3521A 接希捷6T SATA 硬盘报错
HI3521A 接希捷6T SATA 硬盘报错,测试电压供电足够,打印如下,硬盘报错如下,不知道有无人遇到过呢
打印如下:
Login timed out after 60 seconds
(none) login: src/ftpClient.c:732 -> ## channelNo = 0 snap ftp cp
src/email.c:49 -> ## snap is ok, bengin sending Email channel = 0
src/ftpClient.c:732 -> ## channelNo = 3 snap ftp cp
src/email.c:49 -> ## snap is ok, bengin sending Email channel = 3
src/ftpClient.c:732 -> ## channelNo = 1 snap ftp cp
src/email.c:49 -> ## snap is ok, bengin sending Email channel = 1
/sys/devices/platform/ahci.0/ata1/host0/target0:0:0/0:0:0:0/block/sda/size
src/diskInfo.c:325 -> sata 1
disk sda
ata1: softreset failed (1st FIS failed)
ata1: hard resetting link
5:40:34.790311] CoreThread[1517] UpnpDiscover:715: No dev serached!
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
[src/recordFunc.c:recordWrite:871]:how can it happen writeLen = -227229458
src/recordLib.c:1482 -> channelNo 9.lost frame, streamNo 0
src/recordLib.c:1482 -> channelNo 9.lost frame, streamNo 1
src/recordLib.c:1482 -> channelNo 10.lost frame, streamNo 0
src/recordLib.c:1482 -> channelNo 10.lost frame, streamNo 1
src/recordLib.c:1482 -> channelNo 11.lost frame, streamNo 0
打印如下:
Login timed out after 60 seconds
(none) login: src/ftpClient.c:732 -> ## channelNo = 0 snap ftp cp
src/email.c:49 -> ## snap is ok, bengin sending Email channel = 0
src/ftpClient.c:732 -> ## channelNo = 3 snap ftp cp
src/email.c:49 -> ## snap is ok, bengin sending Email channel = 3
src/ftpClient.c:732 -> ## channelNo = 1 snap ftp cp
src/email.c:49 -> ## snap is ok, bengin sending Email channel = 1
/sys/devices/platform/ahci.0/ata1/host0/target0:0:0/0:0:0:0/block/sda/size
src/diskInfo.c:325 -> sata 1
disk sda
ata1: softreset failed (1st FIS failed)
ata1: hard resetting link
5:40:34.790311] CoreThread[1517] UpnpDiscover:715: No dev serached!
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
[src/recordFunc.c:recordWrite:871]:how can it happen writeLen = -227229458
src/recordLib.c:1482 -> channelNo 9.lost frame, streamNo 0
src/recordLib.c:1482 -> channelNo 9.lost frame, streamNo 1
src/recordLib.c:1482 -> channelNo 10.lost frame, streamNo 0
src/recordLib.c:1482 -> channelNo 10.lost frame, streamNo 1
src/recordLib.c:1482 -> channelNo 11.lost frame, streamNo 0
我来回答
回答2个
时间排序
认可量排序
认可0
认可0
或将文件直接拖到这里
悬赏:
E币
网盘
* 网盘链接:
* 提取码:
悬赏:
E币
Markdown 语法
- 加粗**内容**
- 斜体*内容*
- 删除线~~内容~~
- 引用> 引用内容
- 代码`代码`
- 代码块```编程语言↵代码```
- 链接[链接标题](url)
- 无序列表- 内容
- 有序列表1. 内容
- 缩进内容
- 图片![alt](url)
相关问答
-
2014-04-09 10:21:01
-
02017-12-06 11:27:58
-
2017-12-05 16:37:24
-
2017-09-18 11:43:31
-
2017-03-14 12:14:09
-
2017-11-03 16:49:31
-
2019-04-27 14:19:45
-
2017-04-06 13:51:05
-
2018-02-07 16:46:41
-
2018-10-08 14:59:47
-
2019-04-28 14:00:03
-
2019-07-04 22:55:04
-
2020-10-23 11:24:23
-
2017-10-18 11:35:20
-
2020-07-24 14:27:04
-
2018-06-11 12:56:09
-
2019-01-07 16:31:57
-
2017-07-25 16:17:44
-
2017-11-15 18:08:42
无更多相似问答 去提问
点击登录
-- 积分
-- E币
提问
—
收益
—
被采纳
—
我要提问
切换马甲
上一页
下一页
悬赏问答
-
5Hi3516CV610 如何使用SD卡升级固件
-
5cat /dev/logmpp 报错 <3>[ vi] [func]:vi_send_frame_node [line]:99 [info]:vi pic queue is full!
-
50如何获取vpss chn的图像修改后发送至vo
-
5FPGA通过Bt1120传YUV422数据过来,vi接收不到数据——3516dv500
-
50SS928 运行PQtools 拼接 推到设备里有一半画面会异常
-
53536AV100的sample_vdec输出到CVBS显示
-
10海思板子mpp怎么在vi阶段改变视频数据尺寸
-
10HI3559AV100 多摄像头同步模式
-
9海思ss928单路摄像头vio中加入opencv处理并显示
-
10EB-RV1126-BC-191板子运行自己编码的程序
举报反馈
举报类型
- 内容涉黄/赌/毒
- 内容侵权/抄袭
- 政治相关
- 涉嫌广告
- 侮辱谩骂
- 其他
详细说明
提醒
你的问题还没有最佳答案,是否结题,结题后将扣除20%的悬赏金
取消
确认
提醒
你的问题还没有最佳答案,是否结题,结题后将根据回答情况扣除相应悬赏金(1回答=1E币)
取消
确认