4138
- 收藏
- 点赞
- 分享
- 举报
hi3516d的TF卡问题
hi3516d有两个TF卡槽,第一个卡槽如果插着TF卡(闪迪的8G卡),上电,fdisk时会提示如下的错误:
/dev # fdisk mmcblk0
mmcblk0: error -110 sending status command, retrying
mmcblk0: error -110 sending status command, retrying
mmcblk0: error -110 sending status command, aborting
end_request: I/O error, dev mmcblk0, sector 0
Buffer I/O error on device mmcblk0, logical block 0
end_request: I/O error, dev mmcblk0, sector 8
Buffer I/O error on device mmcblk0, logical block 1
end_request: I/O error, dev mmcblk0, sector 16
Buffer I/O error on device mmcblk0, logical block 2
end_request: I/O error, dev mmcblk0, sector 24
Buffer I/O error on device mmcblk0, logical block 3
此时重新插拔一下就好了(上电前没插TF卡,上电后再插TF卡,也是好的)。但断电后,再上电,又不行了。在第二个卡槽插TF卡,则没有这些问题。
请教高手,为什么第一个卡槽插着TF卡上电就不行,这会是什么问题导致的?
附kernel配置:
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
# CONFIG_MMC_CLKGATE is not set
CONFIG_MMC_EMBEDDED_SDIO=y
# CONFIG_MMC_PARANOID_SD_INIT is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_MMC_BLOCK_DEFERRED_RESUME is not set
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_ARMMMCI is not set
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_SDHCI_PXAV3 is not set
# CONFIG_MMC_SDHCI_PXAV2 is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_DW is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
CONFIG_HIMCI=y
CONFIG_SEND_AUTO_STOP=y
CONFIG_HIMCI0=y
CONFIG_HIMCI0_IOBASE=0x206e0000
CONFIG_HIMCI0_INTR=51
CONFIG_MMC0_CLK=100000000
CONFIG_MMC0_CCLK_MAX=100000000
CONFIG_MMC0_CCLK_MIN=60000
CONFIG_HIMCI1=y
CONFIG_HIMCI1_IOBASE=0x206f0000
CONFIG_HIMCI1_INTR=52
CONFIG_MMC1_CLK=100000000
CONFIG_MMC1_CCLK_MAX=100000000
CONFIG_MMC1_CCLK_MIN=60000
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_SWITCH is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
/dev # fdisk mmcblk0
mmcblk0: error -110 sending status command, retrying
mmcblk0: error -110 sending status command, retrying
mmcblk0: error -110 sending status command, aborting
end_request: I/O error, dev mmcblk0, sector 0
Buffer I/O error on device mmcblk0, logical block 0
end_request: I/O error, dev mmcblk0, sector 8
Buffer I/O error on device mmcblk0, logical block 1
end_request: I/O error, dev mmcblk0, sector 16
Buffer I/O error on device mmcblk0, logical block 2
end_request: I/O error, dev mmcblk0, sector 24
Buffer I/O error on device mmcblk0, logical block 3
此时重新插拔一下就好了(上电前没插TF卡,上电后再插TF卡,也是好的)。但断电后,再上电,又不行了。在第二个卡槽插TF卡,则没有这些问题。
请教高手,为什么第一个卡槽插着TF卡上电就不行,这会是什么问题导致的?
附kernel配置:
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
# CONFIG_MMC_CLKGATE is not set
CONFIG_MMC_EMBEDDED_SDIO=y
# CONFIG_MMC_PARANOID_SD_INIT is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_MMC_BLOCK_DEFERRED_RESUME is not set
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_ARMMMCI is not set
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_SDHCI_PXAV3 is not set
# CONFIG_MMC_SDHCI_PXAV2 is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_DW is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
CONFIG_HIMCI=y
CONFIG_SEND_AUTO_STOP=y
CONFIG_HIMCI0=y
CONFIG_HIMCI0_IOBASE=0x206e0000
CONFIG_HIMCI0_INTR=51
CONFIG_MMC0_CLK=100000000
CONFIG_MMC0_CCLK_MAX=100000000
CONFIG_MMC0_CCLK_MIN=60000
CONFIG_HIMCI1=y
CONFIG_HIMCI1_IOBASE=0x206f0000
CONFIG_HIMCI1_INTR=52
CONFIG_MMC1_CLK=100000000
CONFIG_MMC1_CCLK_MAX=100000000
CONFIG_MMC1_CCLK_MIN=60000
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_SWITCH is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
我来回答
回答4个
时间排序
认可量排序
认可0
认可0
认可0
认可0
或将文件直接拖到这里
悬赏:
E币
网盘
* 网盘链接:
* 提取码:
悬赏:
E币
Markdown 语法
- 加粗**内容**
- 斜体*内容*
- 删除线~~内容~~
- 引用> 引用内容
- 代码`代码`
- 代码块```编程语言↵代码```
- 链接[链接标题](url)
- 无序列表- 内容
- 有序列表1. 内容
- 缩进内容
- 图片![alt](url)
相关问答
-
2016-04-03 10:07:52
-
72018-04-20 10:37:01
-
2017-05-26 17:40:53
-
2020-06-13 17:05:07
-
252015-01-23 01:53:02
-
2017-07-06 11:19:02
-
2018-01-12 09:31:18
-
2018-03-15 17:12:39
-
2017-08-15 22:55:23
-
2016-12-12 18:39:17
-
2017-10-03 00:17:09
-
2016-10-10 09:41:04
-
2016-12-12 11:07:53
-
2016-09-29 20:25:44
-
2016-08-04 15:12:21
-
2017-05-09 10:16:21
-
2018-05-23 21:19:18
-
2017-05-23 17:21:09
-
2018-12-26 15:19:51
无更多相似问答 去提问
点击登录
-- 积分
-- E币
提问
—
收益
—
被采纳
—
我要提问
切换马甲
上一页
下一页
悬赏问答
-
5Hi3516CV610 如何使用SD卡升级固件
-
5cat /dev/logmpp 报错 <3>[ vi] [func]:vi_send_frame_node [line]:99 [info]:vi pic queue is full!
-
50如何获取vpss chn的图像修改后发送至vo
-
5FPGA通过Bt1120传YUV422数据过来,vi接收不到数据——3516dv500
-
50SS928 运行PQtools 拼接 推到设备里有一半画面会异常
-
53536AV100的sample_vdec输出到CVBS显示
-
10海思板子mpp怎么在vi阶段改变视频数据尺寸
-
10HI3559AV100 多摄像头同步模式
-
9海思ss928单路摄像头vio中加入opencv处理并显示
-
10EB-RV1126-BC-191板子运行自己编码的程序
举报反馈
举报类型
- 内容涉黄/赌/毒
- 内容侵权/抄袭
- 政治相关
- 涉嫌广告
- 侮辱谩骂
- 其他
详细说明
提醒
你的问题还没有最佳答案,是否结题,结题后将扣除20%的悬赏金
取消
确认
提醒
你的问题还没有最佳答案,是否结题,结题后将根据回答情况扣除相应悬赏金(1回答=1E币)
取消
确认