Hi3536 PCIE_问答_易百纳技术社区

--------------------------------------------------------------------------------------------
AbsoluteAddress Range Value Description
--------------------------------------------------------------------------------------------
00000000 31:0 353619E5 PCI Configuration ID
00000004 31:0 00100006 PCI Command
00000008 31:0 04800001 PCI Revision ID
0000000C 31:0 00000010 Cashe Line Size Register
00000010 31:0 F0000008 Base Address Register 0
00000014 31:0 F7D20000 Base Address Register 1
00000018 31:0 F7C00000 Base Address Register 2
0000001C 31:0 F7D10000 Base Address Register 3
00000020 31:0 F7D00000 Base Address Register 4
00000024 31:0 00000000 Base Address Register 5
00000028 31:0 00000000 Cardbus CIS Pointer
0000002C 31:0 00020000 Subsystem Vendor ID
00000030 31:0 00000000 Expansion ROM Base Address
00000034 31:0 00000040 Capability Pointer
00000038 31:0 00000000 Reserved
0000003C 31:0 0000010B PCI Interrupt Line
00000040 31:0 5FC35001 PCI Power Management Capability
00000044 31:0 00000008 Power Management Status/Control
00000050 31:0 00807005 MSI Capability
00000054 31:0 00000000 MSI Message Address
00000058 31:0 00000000 MSI Message Upper Address
0000005C 31:0 00000000 MSI Message Data
00000060 31:0 00000000 Mask Bits
00000064 31:0 00000000 Pending Bits
00000070 31:0 00020010 PCI Express Capability List Register
00000074 31:0 012C8FC1 Device Capabilities
00000078 31:0 00092000 Device Control and Status Register
0000007C 31:0 00434C22 Link Capabilities
00000080 31:0 10220040 Link Control and Status
00000084 31:0 00000000 Slot Capabilities
00000088 31:0 00000000 Slot Control and Status Register
0000008C 31:0 00000000 Root Control and Capabilities
00000090 31:0 00000000 Root Status
00000094 31:0 0000001F Device Capabilities2
00000098 31:0 00000000 Device Control and Status 2
0000009C 31:0 00000006 Link Capabilities
000000A0 31:0 00010002 Link Control and Status 2
000000A4 31:0 00000000 Slot Capabilities 2
000000A8 31:0 00000000 Slot Control and Status Register 2
00000100 31:0 00020001 Advanced Error Reporting Enhanced Capability Header
00000104 31:0 00000000 Uncorrectable Error Status
00000108 31:0 00400000 Uncorrectable Error Mask
0000010C 31:0 00462030 Uncorrectable Error Severity
00000110 31:0 00002000 Correctable Error Status
00000114 31:0 00006000 Correctable Error Mask
00000118 31:0 000000A0 Advanced Error Capabilities and Control Register
0000011C 31:0 00000000 Header Log Register
00000120 31:0 00000000 Header Log Register
00000124 31:0 00000000 Header Log Register
00000128 31:0 00000000 Header Log Register
0000012C 31:0 00000000 Root Error Command
00000130 31:0 00000000 Root Error Status
00000134 31:0 00000000 Correctable Error Source Identifcation

本帖最后由 shuxin 于 2017-4-21 21:59 编辑

如果插在PC机里，可以正常工作，但如果插在服务器里，  每隔大约1小时服务器变回自动重启。请问如何解决？

BOOT信息如下，请帮忙分析：
## Booting kernel from Legacy Image at 42000000 ...
Image Name: Linux-3.10.0_hi3536
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3878960 Bytes = 3.7 MiB
Load Address: 40008000
Entry Point:  40008000
Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.10.0_hi3536 (pub@BVT-SDK-SERVER3) (gcc version 4.8.3 20131202 (prerelease) (Hisilicon_v400) ) #1 SMP Mon Jun 13 17:08:20 HKT 2016
CPU: ARMv7 Processor [411fc0e1] revision 1 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: hi3536
Truncating memory at 0x40000000 to fit in 32-bit physical address space
Memory policy: ECC disabled, Data cache writealloc
PERCPU: Embedded 8 pages/cpu @c085d000 s8448 r8192 d16128 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line: mem=128M console=ttyAMA0,115200 root=/dev/mtdblock2 rootfstype=jffs2 mtdparts=hi_sfc:1M(boot),4M(kernel),14M(rootfs)
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 122268k/122268k available, 8804k reserved, 0K highmem
Virtual kernel memory layout:
vector  : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap  : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
lowmem  : 0xc0000000 - 0xc8000000 ( 128 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 (  14 MB)
   .text : 0xc0008000 - 0xc06c4c60 (6900 kB)
   .init : 0xc06c5000 - 0xc06f4100 ( 189 kB)
   .data : 0xc06f6000 - 0xc0730c80 ( 236 kB)
   .bss : 0xc0730c80 - 0xc075920c ( 162 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:160
sched_clock: 32 bits at 125MHz, resolution 8ns, wraps every 34359ms
Console: colour dummy device 80x30
Calibrating delay loop... 2786.91 BogoMIPS (lpj=13934592)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0xc052ebc0 - 0xc052ec18
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated (11167.33 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
Serial: AMBA PL011 UART driver
uart:0: ttyAMA0 at MMIO 0x12080000 (irq = 38) is a PL011 rev2
console [ttyAMA0] enabled
uart:1: ttyAMA1 at MMIO 0x12090000 (irq = 39) is a PL011 rev2
bio: create slab at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource timer0
cfg80211: Calling CRDA to update world regulatory domain
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
CPU PMU: probing PMU on CPU 2
CPU PMU: failed to probe PMU!
CPU PMU: failed to register PMU devices!
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
fuse init (API version 7.22)
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
msgmni has been set to 238
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
brd: module loaded
hiahci: initializing
ahci ahci.0: can't get clock
ahci: SSS flag set, parallel bus scan disabled
ahci ahci.0: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl platform mode
ahci ahci.0: flags: ncq sntf stag pm led clo only pmp fbs slum part ccc sxs boh
scsi0 : ahci_platform
scsi1 : ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x11010000-0x1101ffff] port 0x100 irq 59
ata2: SATA max UDMA/133 mmio [mem 0x11010000-0x1101ffff] port 0x180 irq 59
Spi id table Version 1.22
Spi(cs1) ID: 0xC2 0x20 0x19
0xC2 0x20 0x19
SPI nor flash boot mode is 3 Bytes
Spi(cs1):
Block:64KBChip:32MB
Name:"MX25L(256/257)35(E/F)"
spi size: 32MB
chip num: 1
3 cmdlinepart partitions found on MTD device hi_sfc
3 cmdlinepart partitions found on MTD device hi_sfc
Creating 3 MTD partitions on "hi_sfc":
0x000000000000-0x000000100000 : "boot"
0x000000100000-0x000000500000 : "kernel"
0x000000500000-0x000001300000 : "rootfs"
Check Nand Flash Controller v610 ...
FoundNand ID: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Nand: Unknown AND 128MiB 3,3V 8-bit
Nand(HW-Auto): Block:16KB Page:2KB OOB:64B ECC:4bit/512B Chip:128MB*1
NAND_ECC_NONE selected by board driver. This is not recommended!
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
before uhci_hcd and ohci_hcd, not after
hiusb-ehci hiusb-ehci.0: HIUSB EHCI
hiusb-ehci hiusb-ehci.0: new USB bus registered, assigned bus number 1
hiusb-ehci hiusb-ehci.0: irq 53, io mem 0x10040000
hiusb-ehci hiusb-ehci.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
hiusb-ohci hiusb-ohci.0: HIUSB OHCI
hiusb-ohci hiusb-ohci.0: new USB bus registered, assigned bus number 2
hiusb-ohci hiusb-ohci.0: irq 52, io mem 0x10030000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ata1: SATA link down (SStatus 0 SControl 300)
hiusb-xhci hiusb-xhci.0: xHCI Host Controller
hiusb-xhci hiusb-xhci.0: new USB bus registered, assigned bus number 3
hiusb-xhci hiusb-xhci.0: irq 60, io mem 0x11040000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
hiusb-xhci hiusb-xhci.0: xHCI Host Controller
hiusb-xhci hiusb-xhci.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
hisi_i2c hisi_i2c.0: Hisilicon [i2c-0] probed!
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hi_iommu_probe:966: begin
hi_iommu_probe iores_start:131f0000
oprofile: no performance counters
oprofile: using timer interrupt.
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
VFP support v0.3: implementor 41 architecture 3 part 30 variant e rev 0
registered taskstats version 1
ata2: SATA link down (SStatus 0 SControl 300)
VFS: Mounted root (jffs2 filesystem) on device 31:2.
Freeing unused kernel memory: 188K (c06c5000 - c06f4000)

         _ _ _ _ _ _ _ _ _ _ _ _
         \  _  _ _  _ _ ___
         / /__/ \ |_/
         / __ /  -  _ ___
      / /  / /  / /
  _ _ _ _/ /  /  \_/  \_ ______
___________\___\__________________

[RCS]: /etc/init.d/S00devs
[RCS]: /etc/init.d/S01udev
[RCS]: /etc/init.d/S80network
[RCS]: /etc/init.d/S81toe
STMMAC driver:
      platform registration...
      done!
      done!
      DWMAC1000 - user ID: 0x10, Synopsys ID: 0x36
      Enhanced descriptor structure
MACADDR in get is ff:ff:ff:ff:ff:ff
      no valid MAC address for MAC 0;please, use ifconfig or nwhwconfig!
stmmac_associate_phy: phy 0 mode=6
      eth0 - (dev. name: stmmaceth - id: 0, IRQ #55
      IO base addr: 0xfc020000)
libphy: STMMAC MII Bus: probed
eth0: PHY ID 001cc915 at 0 IRQ 0 (1:00)
eth0: PHY ID 001cc915 at 2 IRQ 0 (1:02)
      DWMAC1000 - user ID: 0x10, Synopsys ID: 0x36
      Enhanced descriptor structure
MACADDR in get is ff:ff:ff:ff:ff:ff
      no valid MAC address for MAC 1;please, use ifconfig or nwhwconfig!
stmmac_associate_phy: phy 1 mode=6
      eth1 - (dev. name: stmmaceth - id: 0, IRQ #55
      IO base addr: 0xfc024000)
eth1: PHY ID 001cc915 at 0 IRQ 0 (1:00)
eth1: PHY ID 001cc915 at 2 IRQ 0 (1:02) active
stmmac_reset: RESET COMPLETE!

**************************************************
*  TNK driver built on Jun 13 2016 at 17:08:01
*  TNK driver mode is TOE
**************************************************
stmmac: Rx Checksum Offload Engine supported
      TX Checksum insertion supported
stmmac: Rx Checksum Offload Engine supported
      TX Checksum insertion supported
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
libphy: 1:02 - Link is Up - 100/Full
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Hisilicon Media Memory Zone Manager
Module himedia: init ok
hi3536_base: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
load sys.ko for Hi3536...OK!
load vdec.ko ....OK
load vhd firmware.ko OK
Load hi_jpegdec.ko success.    (SDK_VERSION:[SDK_VERSION] Build Time:[Jun 14 2016, 09:15:49])
Load hi_tde.ko success.       (SDK_VERSION:[SDK_VERSION] Build Time:[Jun 14 2016, 09:15:34])
load region.ko ....OK!
load vgs.ko for Hi3536...OK!
load viu.ko ...OK!
load vpss.ko ....OK!
load vou.ko ....OK!
load rc.ko for Hi3536...OK!
load venc.ko for Hi3536...OK!
load chnl.ko for Hi3536...OK!
load h264e.ko for Hi3536...OK!
load jpege.ko for Hi3536...OK!
load vda.ko ....OK!
load ive.ko ... OK!
PCIe HI35XX_DEV:Jan  3 2017, 16:39:47
MCC_PROTOCOL :Jan  3 2017, 16:39:47
MCC_USR :Jan  3 2017, 16:39:48
PCIe DMA Trans :Jan  3 2017, 16:39:48
Auto login as root ...
login[1011]: root login on 'ttyS000'
Welcome to MacroStrong Linux.
None of nfsroot found in cmdline.
~ #

Hi3536 PCIE

Markdown 语法

Markdown 语法