（已解决）3518Ev200 用fastboot烧写默认的uboot之后网络不通

本帖最后由 hisi3518C 于 2016-5-18 18:12 编辑

控制台打印信息如下：
        16-4-29 上午9:59

############################# ---- 10%
############################ ---- 20%
############################ ---- 30%
############################ ---- 41%
############################ ---- 51%
############################ ---- 61%
############################ ---- 71%
############################ ---- 82%
############################ ---- 92%
##################### ---- 100%
Boot download completed!
         

System startup


U-Boot 2010.06 (Apr 29 2016 - 10:06:07)

Check Flash Memory Controller v100 ... Found
SPI Nor(cs 0) ID: 0xc2 0x20 0x18
Block:64KB Chip:16MB Name:"MX25L128XX"
SPI Nor total size: 16MB
MMC:   
EMMC/MMC/SD controller initialization.
Card did not respond to voltage select!
No EMMC/MMC/SD device found !
In:    serial
Out:   serial
Err:   serial
start download process.

Boot Started successfully!

Send command:        getinfo version
version: 3.0.3
[EOT](OK)

Send command:        getinfo bootmode
spi
[EOT](OK)

Send command:        getinfo spi
Block:64KB Chip:16MB*1
ID:0xC2 0x20 0x18
Name:"MX25L128XX"
[EOT](OK)

Send command:        sf probe 0
16384 KiB hi_fmc at 0:0 is now current device
[EOT](OK)

Send command:        sf erase 0x0 0x50000

Erasing at 0x10000 --  20% complete.
Erasing at 0x20000 --  40% complete.
Erasing at 0x30000 --  60% complete.
Erasing at 0x40000 --  80% complete.
Erasing at 0x50000 -- 100% complete.
[EOT](OK)

Send command:        sf write 0x81000000 0x0 0x50000

Writing at 0x10000 --  20% complete.
Writing at 0x20000 --  40% complete.
Writing at 0x30000 --  60% complete.
Writing at 0x40000 --  80% complete.
Writing at 0x50000 -- 100% complete.
[EOT](OK)
Boot burned successfully.
16-4-29 上午10:00

16-4-29 上午10:00

# ---- 40%
# ---- 100%
Boot download completed!
         

System startup


U-Boot 2010.06 (Apr 29 2016 - 10:06:07)