Hi3518E Ittp_stream 连不上

部分打印的信息如下，请问我的问题出在哪里，谢谢各位了。

U-Boot 2010.06-svn (Mar 27 2014 - 11:56:37)

DRAM:  256 MiB
Check spi flash controller v350... Found
Spi(cs1) ID: 0xC2 0x20 0x17 0xC2 0x20 0x17
Spi(cs1): Block:64KB Chip:8MB Name:"MX25L6406E"
envcrc 0x3696160a
ENV_SIZE = 0xfffc
In:    serial
Out:   serial
Err:   serial
Press Ctrl+C to stop autoboot
8192 KiB hi_sfc at 0:0 is now current device

## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   Linux-3.0.8
.
.
.
   Loading Kernel Image ... OK
OK

Starting kernel ...
.
.
.
Kernel command line: mem=38M console=ttyAMA0,115200 root=/dev/mtdblock2 rootfstype=squashfs mtdparts=hi_sfc:256K(boot),1M(kernel),1536K(rootfs),5376K(user)
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 38MB = 38MB total
Memory: 35656k/35656k available, 3256k reserved, 0K highmem
.
.
.

Spi id table Version 1.22
Spi(cs1) ID: 0xC2 0x20 0x17 0xC2 0x20 0x17
SPI FLASH start_up_mode is 3 Bytes
Spi(cs1):
Block:64KB
Chip:8MB
Name:"MX25L6406E"
spi size: 8MB
chip num: 1
4 cmdlinepart partitions found on MTD device hi_sfc
Creating 4 MTD partitions on "hi_sfc":
0x000000000000-0x000000040000 : "boot"
0x000000040000-0x000000140000 : "kernel"
0x000000140000-0x0000002c0000 : "rootfs"
0x0000002c0000-0x000000800000 : "user"
Fixed MDIO Bus: probed
himii: probed
.
.
.
Freeing init memory: 88K

            _ _ _ _ _ _ _ _ _ _ _ _
            \  _  _   _  _ _ ___
            / /__/ \ |_/
           / __   /  -  _ ___
          / /  / /  / /
  _ _ _ _/ /  /  \_/  \_ ______
___________\___\__________________

[RCS]: /etc/init.d/S00devs
[RCS]: /etc/init.d/S01udev
udevd (280): /proc/280/oom_adj is deprecated, please use /proc/280/oom_score_adj instead.
[RCS]: /etc/init.d/S80network
Hisilicon Media Memory Zone Manager
ERROR: Conflict MMZ:
PHYS(0x82000000, 0x83FFFFFF), GFP=0, nBYTES=32768KB,    NAME="anonymous"
MMZ conflict to kernel memory (0x80000000, 0x825FFFFF)
Add MMZ failed: PHYS(0x82000000, 0x83FFFFFF), GFP=0, nBYTES=32768KB,    NAME="anonymous"
hi3518_base: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
Hisilicon UMAP device driver interface: v3.00
load sys.ko for Hi3518...OK!
insmod: can't insert 'hi3518_tde.ko': Operation not permitted
hi3518_dsu: Unknown symbol TdeOsiMbBlit (err 0)
hi3518_dsu: Unknown symbol TdeOsiMb2Mb (err 0)
hi3518_dsu: Unknown symbol TdeOsiCancelJob (err 0)
hi3518_dsu: Unknown symbol TdeOsiOpen (err 0)
hi3518_dsu: Unknown symbol TdeOsiOsd2Mb (err 0)
hi3518_dsu: Unknown symbol TdeOsiEndJob (err 0)
hi3518_dsu: Unknown symbol TdeOsiClose (err 0)
hi3518_dsu: Unknown symbol TdeOsiMbFill (err 0)
hi3518_dsu: Unknown symbol TdeOsiGetFiltParam (err 0)
hi3518_dsu: Unknown symbol TdeOsiMbRotate (err 0)
hi3518_dsu: Unknown symbol TdeOsiBeginJobEx (err 0)
hi3518_dsu: Unknown symbol TdeOsiSetFiltParam (err 0)
hi3518_dsu: Unknown symbol TdeOsiMemRequest (err 0)
hi3518_dsu: Unknown symbol TdeOsiRegisterMemManage (err 0)
hi3518_dsu: Unknown symbol TdeOsiGetJobNumInFifo (err 0)
hi3518_dsu: Unknown symbol TdeOsiMbLDC (err 0)
insmod: can't insert 'hi3518_dsu.ko': unknown symbol in module, or unknown parameter
load viu.ko for Hi3518...OK!
ISP Mod init!
load vpss.ko ....OK!
load vou.ko ....OK!
hifb: Unknown symbol TdeOsiCancelJob (err 0)
hifb: Unknown symbol TdeOsiOpen (err 0)
hifb: Unknown symbol TdeOsiEndJob (err 0)
hifb: Unknown symbol TdeOsiClose (err 0)
hifb: Unknown symbol tde_get_procentry (err 0)
hifb: Unknown symbol TdeOsiBlit (err 0)
hifb: Unknown symbol TdeOsiBeginJob (err 0)
hifb: Unknown symbol TdeOsiEnableRegionDeflicker (err 0)
insmod: can't insert 'hifb.ko': unknown symbol in module, or unknown parameter
load venc.ko for Hi3518...OK!
load group.ko for Hi3518...OK!
load chnl.ko for Hi3518...OK!
load h264e.ko for Hi3518...OK!
load jpege.ko for Hi3518...OK!
load rc.ko for Hi3518...OK!
load region.ko ....OK!
load vda.ko ....OK!
hi_i2c init is ok!
insmod: can't insert 'extdrv/ssp_ad9020.ko': No such file or directory
Hisilicon Gpio Driver OK
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
acodec inited!
insert audio
==== Your input Sensor type is ov9712 ====
Auto login as root ...
Jan  1 00:00:08 login[510]: root login on 'ttyS000'
Welcome to HiLinux.
None of nfsroot found in cmdline.
# PHY: himii:01 - Link is Up - 100/Full

# mkdir /tmp/nfs
# mount -t nfs -o nolock -o tcp,rsize=1024 192.168.1.105:/root/hi3518/nfs /tmp/n
fs
# cd /tmp/nfs/
# cd ko/
# ./load3518e -r
remove audio
unload ive.ko ....OK!
unload vda.ko ....OK!
unload region.ko ....OK!
unload rc.ko for Hi3518...OK!
unload jpege.ko for Hi3518...OK!
unload h264e.ko for Hi3518...OK!
unload chnl.ko for Hi3518...OK!
unload group.ko for Hi3518...OK!
unload venc.ko for Hi3518...OK!
unload vou.ko ....OK!
unload vpss.ko ....OK!
ISP Mod Exit!
unload viu.ko for Hi3518...OK!
rmmod: can't unload 'hi3518_dsu': unknown symbol in module, or unknown parameter
rmmod: can't unload 'hi3518_tde': unknown symbol in module, or unknown parameter
# ./load3518e -i ov9712
insert_ko()begin - -!
Hisilicon Media Memory Zone Manager
Hisilicon UMAP device driver interface: v3.00
pa:82600000, va:c2e40000
load sys.ko for Hi3518...OK!
load viu.ko for Hi3518...OK!
ISP Mod init!
load vpss.ko ....OK!
load vou.ko ....OK!
load venc.ko for Hi3518...OK!
load group.ko for Hi3518...OK!
load chnl.ko for Hi3518...OK!
load h264e.ko for Hi3518...OK!
load jpege.ko for Hi3518...OK!
load rc.ko for Hi3518...OK!
load region.ko ....OK!
load vda.ko ....OK!
hi_i2c init is ok!
Kernel: ssp initial ok!
insmod: can't insert 'gpio.ko': File exists
acodec inited!
insert audio
==== Your input Sensor type is ov9712 ====
# cd ..
# cd Hi3518_ITTB_MPP2_V1.0.0.8/
# ./HiIspTool.sh -a -s
killall: ittb_stream: no process killed
killall: ittb_control: no process killed
# pqtools:begin to run
port is : 4321
bind ok!
pqtools:server(port:4321)begin to listen
pqtools:Waiting for connection from client!
--------------welcome to HI_HAL_ISP_GetISPRegAttr----------------
--------------welcome to HI_HAL_ISP_GetISPRegAttr----------------
--------------welcome to HI_HAL_ISP_GetISPRegAttr----------------
--------------welcome to HI_HAL_ISP_GetISPRegAttr----------------
--------------welcome to HI_HAL_ISP_GetISPRegAttr----------------
--------------welcome to HI_HAL_ISP_GetISPRegAttr----------------
--------------welcome to HI_HAL_ISP_GetISPRegAttr----------------
--------------welcome to HI_HAL_ISP_GetISPRegAttr----------------
--------------welcome to HI_HAL_ISP_GetISPRegAttr----------------
--------------welcome to HI_HAL_ISP_GetISPRegAttr----------------

[]-(2841)Not Init ISP!