[*] Non-standard serial port support
非标准的serial port支援不用选了
Computone IntelliPort Plus serial support
<*> Comtrol RocketPort support
Cyclades async mux support
[*] Cyclades-Z interrupt mode operation (EXPERIMENTAL)
Digiboard Intelligent Async Support
Hayes ESP serial port support
Moxa Intellio support
Moxa SmartIO support
Multi-Tech multiport card support (EXPERIMENTAL)
Microgate SyncLink card support
SyncLink Multiport support
HDLC line discipline support
SDL RISCom/8 card support
Specialix IO8+ card support
[*] Specialix DTR/RTS pin is RTS
Specialix SX (and SI) card support
Specialix RIO system support
[*] Support really old RIO/PCI cards
[*] Stallion multiport serial support
Stallion EasyIO or EC8/32 support
Stallion EC8/64, ONboard, Brumby support
Serial drivers --->
<*> 8250/16550 and compatible serial support如果要支援标准的serial port，这项是要选的，最好选
择
[*] Console on 8250/16550 and compatible serial port可以不用选
如果开启这项，就能用serial port的连线，当做系統的一个console
8250/16550 PCMCIA device support这个当然不用选了
[*] 8250/16550 device discovery via ACPI namespace不用选了
(4) Maximum number of non-legacy 8250/16550 serial ports选2个
所要支援的Serial Port的数量，包括在PCI介面上的模拟介面，一般2个
[*] Extended 8250/16550 serial driver options不用选了
延伸的标准设定，可以支援超过四个COM port还有share serial的設定
[ ] Support more than 4 legacy serial ports不用选了
[*] Support for sharing serial interrupts不用选了
[*] Autodetect IRQ on standard ports (unsafe)不安全还敢选么？
[*] Support special multiport boards对特殊多接口板的支持，不用选择
[*] Support RSA serial ports加密算法多端口支持，不用选择了
---Non-8250 serial port support
[*] Legacy (BSD) PTY support这个必须选，否则你X里的任何终端都打不开
Crash Utility memory driver
(256) Maximum number of legacy PTY in use (NEW)
Parallel printer support有并口的打印机就选吧
[*] Support for console on line printer网络打印机，不用了，不选
Support for user-space parallel port device drivers不选
Texas Instruments parallel link cable support不选
QIC-02 tape support又是磁带机，当然不选
[*] Do you want runtime configuration for QIC-02
---Setting runtime QIC-02 configuration is done with qic02conf
---from the tpqic02-support package. It is available at
---metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/
IPMI ---> 开启
IPMI讯息的处理器，IPMI是用來支援一些感应器，像是溫度、电压的感应器
IPMI top-level message handler
[*] Generate a panic event to all BMCs on a panic
[*] Generate OEM events containing the panic string
Device interface for IPMI
IPMI System Interface handler
IPMI Watchdog Timer
Watchdog Cards --->虽然称为Cards，这个可以用纯软件来实现，当然也有硬件的。如果你把这个选中，那
么就会在你的/dev下创建一个名为watchdog的文件，它可以记录你的系统的运行情况，一直到系统重新启动的1分钟
左右。有了这个文件，你就可以恢复系统到重启前的状态了。
[*] Watchdog Timer Support选择
[*] Disable watchdog shutdown on close选择
---Watchdog Device Drivers
Software watchdog这个要选择，我没有硬件阿
Acquire SBC Watchdog Timer
Advantech SBC Watchdog Timer
ALi M1535 PMU Watchdog Timer
ALi M7101 PMU Computer Watchdog
AMD Elan SC520 processor Watchdog
Eurotech CPU-1220/1410 Watchdog Timer
IB700 SBC Watchdog Timer
ICP Wafer 5823 Single Board Computer Watchdog
Intel i8xx TCO Timer/Watchdog 我选择in tel的就可以了，其它的就不用选了
National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog
< > National Semiconductor SCx200 Watchdog
< > SBC-60XX Watchdog Timer
SMA CPU5 Watchdog
W83627HF Watchdog Timer
W83877F (EMACS) Watchdog Timer
ZF MachZ Watchdog
---ISA-based Watchdog Cards这个可以不用选择了
Berkshire Products ISA-PC Watchdog
Mixcom Watchdog
WDT Watchdog timer
[*] WDT501 features
---PCI-based Watchdog Cards我也没有这个PCI设备，不用选择了
Berkshire Products PCI-PC Watchdog
PCI-WDT500/501 Watchdog timer
[*] PCI-WDT501 features
---USB-based Watchdog Cards我没有这个USB设备，不用选择了
Berkshire Products USB-PC Watchdog
Intel/AMD/VIA HW Random Number Generator support支援主板上的随机数产生器用的，先編成模
組
/dev/nvram support不确定是干嘛的，编成模块
<*> Enhanced Real Time Clock Support “增强性实时钟支持”，启用后将生成 /dev/rtc设备。这个非常有
用，Mplayer可以用它同步声音和图像(如果没有它的话
mplayer将使用 sleep()函数计算声音和图像时间，可能会导
致图像比声音快一截)，Vmware也需要它。请务必选中它。
Double Talk PC internal speech card support Double Talk系統用的，好像是一种語音合成器什么的，
一般人沒用
Siemens R3964 line discipline如果系統上有东西用西门子
R3964的原則來传输的話才需要
< > Applicom intelligent fieldbus card support支援
Applicom intelligent fieldbus card的东东，一般人应
该也沒用
Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL) Sony的东西，我没有啊，
不选了
Ftape, the floppy tape device driver --->磁带机，好老的产品了，不用选择了
Ftape (QIC-80/Travan) support
Zftape, the VFS interface
(10240) Default block size (NEW)
---The compressor will be built as a module only!
(3) Number of ftape buffers (EXPERIMENTAL) (NEW)
[*]
Enable procfs status report (+2kb)
Debugging output (Normal) --->
(X) Normal
( ) Excessive
( ) Reduced
( ) None
---
Hardware configuration
Floppy tape controllers (Standard) --->
(X) Standard
( ) MACH-2
( ) FC-10/FC-20
( ) Alt/82078
(8) Default FIFO threshold (EXPERIMENTAL) (NEW)可以不用选择
有名管道是一个能在互不相关进程之间传送数据的特殊文件。一个或多个进程向内写入数据，在另一端由一个进程负责读出。
有名管道是在文件系统中可见的，也就是说ls可以直接看到。(有名管道又称
FIFO，也就是先入先出
(2000) Maximal data rate to use (EXPERIMENTAL) (NEW)不用选择了
<*> /dev/agpgart (AGP Support) AGP支持。选中你显卡有关的就行了
<*> ALI chipset support
<*> ATI chipset support
<*> AMD Irongate, 761, and 762 chipset support
<*> AMD Opteron/Athlon64 on-CPU GART support
<*> Intel 440LX/BX/GX, I8xx and E7x05 chipset support
<*> Intel i865 chipset support
<*> NVIDIA nForce/nForce2 chipset support
<*> SiS chipset support这个必须选择，我的是sis芯片的东西
<*> Serverworks LE/HE chipset support
<*> VIA chipset support
<*> Transmeta Efficeon support
[*] Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)
“直接渲染支持”，这个对非
Nvidia显卡非常有用，它能使 xfree直接操作显卡可以达到接近硬件加速的水平。
但仅仅是性能接近硬件加速，并不能和 Nvidia卡的驱动相媲美。我的 TNT2加 4192驱动跑
Quake3可以稳定
83fps/s，记得以前某人的 ATI 8500显卡(CPU主频不记得了，反正比我的快)，也只能在 6x fps/s。
所以，使用非
N卡的朋友，如果您想在 Linux下更好地跑
3D游戏，最好还是换一块 Nvidia的显卡，如果您暂时还不
想换显卡，就选上它吧。
3dfx Banshee/Voodoo3+
3dlabs GMX 2000
ATI Rage 128
ATI Radeon
Intel I810
Intel 830M, 845G, 852GM, 855GM, 865G
这个也选择一下吧
Matrox g200/g400
SiS video cards这个也要选择
PCMCIA character devices ---> PCMCIA，我没有，不用选择了
SyncLink PC Card support
ACP Modem (Mwave) support一般人用不上，好像是用來支援
IBM Thinkpad某些系列的ACP
Modem
RAW driver (/dev/raw/rawN) (OBSOLETE)跟
block device有关的，先編成模組
(256) Maximum number of RAW devices to support (1-8192) (NEW)
Hangcheck timer
好像是会检查系统状况，有问题时自动重开，编成模組放着
I2C support ---> I2C Protocol的支援，一般人应该不会用到这种微系統连接用的裝置吧
Misc devices --->
Device driver for IBM RSA service processor
为RSA加密算法服务处理器设计的，不用选择
Multimedia devices --->支援影像、聲音擷取卡及FM收聽介面卡用的，一般人應該也沒用
Video For Linux
Video For Linux --->
---Video Adapters
BT848 Video For Linux
Mediavision Pro Movie Studio Video For Linux
Quickcam BW Video For Linux
QuickCam Colour Video For Linux (EXPERIMENTAL)
W9966CF Webcam (FlyCam Supra and others) Video For Linux
CPiA Video For Linux
CPiA Parallel Port Lowlevel Support
CPiA USB Lowlevel Support
SAA5246A Teletext processor
SAA5249 Teletext processor
SAB3036 tuner
Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)
Zoran ZR36057/36067 Video For Linux
Iomega Buz support
Pinnacle/Miro DC10(+) support
Pinnacle/Miro DC30(+) support
Linux Media Labs LML33 support
Linux Media Labs LML33R10 support
Sony Vaio Picturebook Motion Eye Video For Linux (EXPERIMENTAL)
Philips SAA7134 support
Siemens-Nixdorf 'Multimedia eXtension Board'
Philips-Semiconductors 'dpc7146 demonstration board'
Hexium HV-PCI6 and Orion frame grabber
Hexium Gemini frame grabber
Conexant 2388x (bt878 successor) support
Radio Adapters ---> 广播的当然不用选了
ADS Cadet AM/FM Tuner
AIMSlab RadioTrack (aka RadioReveal) support
AIMSlab RadioTrack II support
Aztech/Packard Bell Radio
GemTek Radio Card support
GemTek PCI Radio Card support
Guillemot MAXI Radio FM 2000 radio
Maestro on board radio
SF16FMI Radio
SF16FMR2 Radio
TerraTec ActiveRadio ISA Standalone
Trust FM radio card
Typhoon Radio (a.k.a. EcoRadio)
[*] Support for /proc/radio-typhoon
Zoltrix Radio
Digital Video Broadcasting Devices --->
数字影像广播用的，让你能在Linux上接上相关裝置，一般人应该也沒用
[*] DVB For Linux
DVB Core Support
---Supported Frontend Modules
TWINHAN DST based DVB-S frontend (QPSK)
STV0299 based DVB-S frontend (QPSK)
Frontends with sp887x demodulators, e.g. Microtune DTF7072
(/usr/lib/hotplug/firmware/sc_main.mc) Full pathname of sp887x firmwa
Alps TDLB7 (OFDM)
Alps TDMB7 (OFDM)
Atmel AT76C651 (QAM)
Frontends with Connexant CX24110 demodulator (QPSK)
Grundig 29504-491 (QPSK)
Grundig 29504-401 (OFDM)
Zarlink MT312 Satellite Channel Decoder (QPSK)
Frontends with external VES1820 demodulator (QAM)
Frontends with VES1893 or VES1993 demodulator (QPSK)
< > Frontends with external TDA10045H or TDA10046H demodulators (OFDM
Frontends with NxtWave Communications NXT6000 demodulator (OFDM)
---Supported SAA7146 based PCI Adapters
---AV7110 cards
[*] AV7110 OSD support
Budget cards
Budget cards with onboard CI connector
Budget cards with analog video inputs
AV7110 cards with Budget Patch
---Supported USB Adapters
Technotrend/Hauppauge Nova-USB devices
Technotrend/Hauppauge USB DEC devices
---Supported FlexCopII (B2C2) Adapters
Technisat Skystar2 PCI
---Supported BT878 Adapters
Nebula/Pinnacle PCTV PCI cards
Graphics support --->
[*] Support for frame buffer devices支持Frame buffer的，一定要选择
Permedia2 support
[*] enable FIFO disconnect feature
CyberPro 2000/2010/5000 support不用选择了
[*] IMS Twin Turbo display support
VGA 16-color graphics support 16色的VGA支持，应该选择
[*] VESA VGA graphics support标准视频驱动，一定要选择
Hercules mono graphics support
nVidia Riva support NV的显卡驱动，不用选择
Intel 810/815 support (EXPERIMENTAL)这个应该选择
[*] use VESA Generalized Timing Formula
Matrox acceleration Mator显卡的驱动，不用选择
[*] Millennium I/II support
[*] Mystique support
[*] G100/G200/G400/G450/G550 support
Matrox I2C support不用选择
G400 second head support
[*] Multihead support
ATI Radeon display support (Old driver) ATI显卡驱动，不用选择
ATI Radeon display support ATI显卡驱动，不用选择
[*] DDC/I2C for ATI Radeon support ATI显卡驱动，不用选择
[*] Lots of debug output from Radeon driver ATI显卡驱动，不用选择
ATI Rage128 display support ATI显卡驱动，不用选择
ATI Mach64 display support ATI显卡驱动，不用选择
[*] Mach64 CT/VT/GT/LT (incl. 3D RAGE) support不用选择
[*] Mach64 GX support不用选择
[*] Rage XL No-BIOS Init support不用选择
SiS acceleration我的显卡这个芯片的，应该选择
[*] SiS 300 series support
[*] SiS 315/330 series support以上两个可以选择
NeoMagic display support
IMG Kyro support
3Dfx Banshee/Voodoo3 display support
3Dfx Voodoo Graphics (sst1) support
Trident support三叉戟支持，不用选择了
Virtual Frame Buffer support (ONLY FOR TESTING!)
Console display driver support --->你至少应该支持VGA text console，否则你无法从控制台使用
LINUX
---VGA text console
[*] Video mode selection support支援在开机时可选择指定的影像模式，而不是用text，应该选择
MDA text console (dual-headed) (EXPERIMENTAL)有可以同时接两台
monitor的card才要选
<*> Framebuffer Console support这个和开机背景有关，应该选择，那个很酷的东西哦
[*] Select compiled-in fonts
[*] VGA 8x8 font
[*] VGA 8x16 font以上三个应该选择
[*] Mac console 6x11 font (not supported by all drivers) MAC的东西，我用不起，不用选择了
[*] Pearl (old m68k) console 8x8 font
[*] Acorn console 8x8 font
[*] Mini 4x6 font以上三个按默认选择
[*] Sparc console 8x16 font
[*] Sparc console 12x22 font (not supported by all drivers) 以上两个是SUN公司的Sparc系统用的，
不用选择
Logo configuration --->这个和图形界面有关，应该选择
[*] Bootup logo
[*]
Standard black and white Linux logo
[*]
Standard 16-color Linux logo
[*]
Standard 224-color Linux logo以上4个应该选择
Sound --->
如果要选用软件ALSA驱动声卡，第一项编译成模块
Sound card support
这个肯定是要选择的
Advanced Linux Sound Architecture ---> ALSA也是肯定要选择的
Advanced Linux Sound Architecture ALSA也是肯定要选择的
Sequencer support
不知道是什么，按默认吧
Sequencer dummy client音序器哑设备客户机程序
OSS Mixer API
不知道是什么，按默认吧
OSS PCM (digital audio) API 不知道是什么，按默认吧
[*] OSS Sequencer API不知道是什么，按默认吧
RTC Timer support不用选择
[*] Verbose printk不用选择
[*] Debug不用选择
[*] Debug memory不用选择
Generic devices --->
Dummy (/dev/null) soundcard
应该选择
Virtual MIDI soundcard
虚拟
MIDI也是要选择的
MOTU MidiTimePiece AV multiport MIDI
UART16550 -MIDI only driver
Generic MPU-401 UART driver
应该选择
ISA devices --->老标准的东西，不用选择了
PCI devices --->我没有PCI的声卡，不用选择
ALi PCI Audio M5451
ATI IXP 150/200/250
Aureal Advantage
Aureal Vortex
Aureal Vortex 2
Aztech AZF3328 / PCI168 (EXPERIMENTAL)
Bt87x Audio Capture
Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x
[*] Cirrus Logic (Sound Fusion) New DSP support (EXPERIMENTAL)
Cirrus Logic (Sound Fusion) CS4281
EMU10K1 (SB Live! & Audigy, E-mu APS)
Korg 1212 IO
Digigram miXart
NeoMagic NM256AV/ZX
RME Digi32, 32/8, 32 PRO
RME Digi96, 96/8, 96/8 PRO
RME Digi9652 (Hammerfall)
RME Hammerfall DSP Audio
Trident 4D-Wave DX/NX; SiS 7018
Yamaha YMF724/740/744/754
Avance Logic ALS4000
C-Media 8738, 8338
(Creative) Ensoniq AudioPCI 1370
(Creative) Ensoniq AudioPCI 1371/1373
ESS ES1938/1946/1969 (Solo-1)
ESS ES1968/1978 (Maestro-1/2/2E)
ESS Allegro/Maestro3
ForteMedia FM801
ForteMedia FM801 + TEA5757 tuner
ICEnsemble ICE1712 (Envy24)
ICEnsemble ICE1712 (Envy24)
ICE/VT1724 (Envy24HT)
Intel i8x0/MX440, SiS 7012; Ali 5455; NForce Audio; AMD768/8111
Intel i8x0/MX440; AMD768/8111 modems (EXPERIMENTAL)
S3 SonicVibes
VIA 82C686A/B, 8233 South Bridge
Digigram VX222
ALSA USB devices --->我没有U SB的声卡，不用选择
USB Audio/MIDI driver
PCMCIA devices --->笔记本用的，不用选择
Digigram VXpocket
Digigram VXpocket 440
Sound Core PDAudioCF
Open Sound System --->
Open Sound System (DEPRECATED)这个也是要选择的，音质比
ALSA好一点
BT878 audio dma不用选择
C-Media PCI (CMI8338/8738)不用选择
[*] Enable legacy FM
(388) FM I/O 388, 3C8, 3E0, 3E8 (NEW)
[*] Enable legacy MPU-401可以选择
(330) MPU-401 I/O 330, 320, 310, 300 (NEW) 可以选择
[*] Enable joystick操纵杆就不用选择了
[*] Support CMI8738 based audio cards
[*] Inverse S/PDIF in for CMI8738
[*] Enable S/PDIF loop for CMI8738
(2) Number of speakers 2, 4, 5, 6 (NEW)
Creative SBLive! (EMU10K1)不用选择了
[*] Creative SBLive! MIDI (EXPERIMENTAL)不用选择了
Crystal SoundFusion (CS4280/461x)不用选择了
Crystal Sound CS4281不用选择了
Ensoniq AudioPCI (ES1370)不用选择
Creative Ensoniq AudioPCI 97 (ES1371)一定要选择
ESS Technology Solo1不用选择了
ESS Maestro, Maestro2, Maestro2E driver不用选择了
ESS Maestro3/Allegro driver (EXPERIMENTAL)不用选择了
Intel ICH (i8xx) audio support一定要选择
S3 SonicVibes不用选择了
Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core不用选择了
Support for Turtle Beach MultiSound Classic, Tahiti, Monterey不用选择了
(/etc/sound/msndinit.bin) Full pathname of MSNDINIT.BIN firmware file不用选择了
(/etc/sound/msndperm.bin) Full pathname of MSNDPERM.BIN firmware file不用选择了
Support for Turtle Beach MultiSound Pinnacle, Fiji不用选择了
(/etc/sound/pndspini.bin) Full pathname of PNDSPINI.BIN firmware file不用选择了
(/etc/sound/pndsperm.bin) Full pathname of PNDSPERM.BIN firmware file不用选择了
VIA 82C686 Audio Codec不用选择了
[*] VIA 82C686 MIDI不用选择了
OSS sound modules编译成模块
[*] Verbose initialisation应该选择
[*] Persistent DMA buffers应该选择
AD1816(A) based cards (EXPERIMENTAL)不用选择了
AD1889 based cards (AD1819 codec) (EXPERIMENTAL)不用选择了
Aztech Sound Galaxy (non-PnP) cards不确定，编译成模块
Adlib Cards不确定，编译成模块
ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20)不确定，编译成模块
Crystal CS4232 based (PnP) cards不确定，编译成模块
Ensoniq SoundScape support不确定，编译成模块
Gravis Ultrasound support不确定，编译成模块
[*] 16 bit sampling option of GUS (_NOT_ GUS MAX)不确定，编译成模块
[*] GUS MAX support不确定，编译成模块
Loopback MIDI device support不确定，编译成模块
MediaTrix AudioTrix Pro support不用选择
Microsoft Sound System support编译成模块
MPU-401 support (NOT for SB16)我的声卡MIDI就是这种的，必须选择
NM256AV/NM256ZX audio support不用选择
OPTi MAD16 and/or Mozart based cards不用选择
[*] Support MIDI in older MAD16 based cards (requires SB)不用选择
ProAudioSpectrum 16 support不用选择
PSS (AD1848, ADSP-2115, ESC614) support不用选择
[*] Enable PSS mixer (Beethoven ADSP-16 and other compatibile)不用选择
100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) suppor不用选择
AWE32 synth不用选择
Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, M不用选择
Limited support for Turtle Beach Wave Front (Maui, Tropez) synt不用选择
Yamaha FM synthesizer (YM3812/OPL-3) support
Yamaha OPL3-SA1 audio controller
Yamaha OPL3-SA2 and SA3 based PnP cards
Yamaha YMF7xx PCI audio (native mode)
[*] Yamaha PCI legacy ports support以上5项是 Yamaha声卡的支持，不用选择
6850 UART support不用选择
Gallant Audio Cards (SC-6000 and SC-6600 based) 不用选择
[*] SC-6600 based audio cards (new Audio Excel DSP 16)不用选择
[*] Activate SC-6600 Joystick Interface不用选择
(4) SC-6600 CDROM Interface (4=None, 3=IDE, 1=Panasonic, 0=?Son不用选择
(0) SC-6600 CDROM Interface I/O Address (NEW) 不用选择
[*] Audio Excel DSP 16 (MSS emulation) ---> 不用选择
(X) MSS emulation
( ) SBPro emulation
[*] Audio Excel DSP 16 (MPU401 emulation) 不用选择
微信扫码分享
QQ好友
